-----Original Message----- From: linuxbios-admin@clustermatic.org [mailto:linuxbios-admin@clustermatic.org] On Behalf Of Ronald G. Minnich Sent: Wednesday, December 15, 2004 11:22 PM To: Gin Cc: 'LinuxBIOS' Subject: RE: booting slow
On Thu, 16 Dec 2004, Gin wrote:
The getpir util generates a routing table by looking at the memory config of my "developing" machine. How's it related to my target machine?
It almost certainly is wrong, unless all the wires on the machines are absolutely identical. I am willing to guess your irq tabls for the target are wrong.
You can only use getpir if you have a working bios. Otherwise you Will get junk. Considering your board is new, you don't have a Working bios, no? You have to go the hard way and read the Bottom link as to how to make the irq.c file. Base it off of your Motherboard design and make changes where the wires are, based on The shematic. Enjoy:)
Any document I can reference? This link mentioned on irq_tables.c http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM doesn't work.
oh great. I will try to find a copy here.
Ron
Here it is: http://www.microsoft.com/whdc/archive/pciirq.mspx _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios
-
Dave Aubin