Patrick Georgi (patrick@georgi-clan.de) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1686
-gerrit
commit 62c6dd590c1608d1b44fcc64e7628cd25b89d9fe Author: Patrick Georgi patrick.georgi@secunet.com Date: Fri May 18 12:47:02 2012 +0200
smsc/lpc47n227: Make early_serial usable
This is the smallest possible change to make early_serial.c compile when included from romstage.c.
early_serial could be reworked to be built as separate unit (romstage-y), but that should be done for all SuperIOs, not some individual outlier.
Change-Id: I90ee66b43c9677b86b1b5d6fcc8febfbe58d80dd Signed-off-by: Patrick Georgi patrick.georgi@secunet.com --- src/superio/smsc/lpc47n227/early_serial.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/src/superio/smsc/lpc47n227/early_serial.c b/src/superio/smsc/lpc47n227/early_serial.c index 32bd3e3..a60dc48 100644 --- a/src/superio/smsc/lpc47n227/early_serial.c +++ b/src/superio/smsc/lpc47n227/early_serial.c @@ -41,10 +41,13 @@ static void pnp_exit_conf_state(device_t dev) * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. * @param iobase Base I/O port for the logical device. */ -void lpc47n227_pnp_set_iobase(device_t dev, u16 iobase) +static void lpc47n227_pnp_set_iobase(device_t dev, u16 iobase) { /* LPC47N227 requires base ports to be a multiple of 4. */ + /* it's not very useful to do an ASSERT here: if it trips, + * there's no console to report it. ASSERT(!(iobase & 0x3)); + */
switch (dev & 0xFF) { case LPC47N227_PP: @@ -73,7 +76,7 @@ void lpc47n227_pnp_set_iobase(device_t dev, u16 iobase) * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. * @param enable 0 to disable, anythig else to enable. */ -void lpc47n227_pnp_set_enable(device_t dev, int enable) +static void lpc47n227_pnp_set_enable(device_t dev, int enable) { u8 power_register = 0, power_mask = 0, current_power, new_power;
-
Patrick Georgi