The attached patch adds dump information for the Fintek F71862FG and F71863FG. According to the datasheets, the registers for both parts are exactly the same. The datasheets were downloaded from www.fintek.com.tw: F71862_V028P.pdf (Version 0.28P 2008-07-21) F71863_V029P.pdf (Version 0.29P 2008-07-21)
Tested on my Jetway NF77-N1G6-LF board with Fintek F71862FG: http://www.jetwaycomputer.com/NF77.html http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=581
# ./superiotool -d superiotool rXXXX Found Fintek F71862FG / F71863FG (vid=0x3419, id=0x0106) at 0x4e Register dump: idx 20 21 23 24 25 26 27 28 29 2a 2b 2c 2d val 06 01 19 34 00 00 30 00 00 00 10 00 0f def 06 01 19 34 00 00 30 00 00 00 00 00 08 LDN 0x00 (FDC) idx 30 60 61 70 74 f0 f2 f4 val 00 00 00 00 04 0e ff 00 def 01 03 f0 06 02 0e 03 00 LDN 0x01 (UART1) idx 30 60 61 70 f0 val 01 03 f8 04 00 def 01 03 f8 04 00 LDN 0x02 (UART2) idx 30 60 61 70 f0 f1 val 01 02 f8 03 00 4c def 01 02 f8 03 00 04 LDN 0x03 (Parallel Port) idx 30 60 61 70 74 f0 val 01 03 78 07 04 08 def 01 03 78 07 03 42 LDN 0x04 (Hardware Monitor) idx 30 60 61 70 val 01 02 95 00 def 01 02 95 00 LDN 0x05 (KBC) idx 30 60 61 70 72 val 00 00 60 00 0c def 01 00 60 00 00 LDN 0x06 (GPIO) idx f0 f1 f2 f3 e0 e1 e2 e3 d0 d1 d2 d3 c0 c1 c2 c3 b0 b1 b2 b3 val 00 00 00 00 00 00 90 00 00 ff 3f 00 00 0f 0d 00 00 0f 03 00 def 00 0f NA 00 00 ff NA 00 00 ff NA 00 00 0f NA 00 00 3f NA 00 LDN 0x07 (VID) idx 30 60 61 val 01 07 00 def 00 00 00 LDN 0x08 (SPI) idx f0 f1 f2 f3 f4 f5 f6 f7 f8 fa fb fc fd fe ff val 10 04 01 10 00 00 00 00 00 00 00 00 00 00 00 def 10 04 01 NA 00 00 00 NA 00 00 00 00 00 00 00 LDN 0x0a (PME and ACPI) idx 30 f0 f1 f4 f5 val 00 00 06 07 1c def 00 00 NA 06 1c
On Sun, Jun 21, 2009 at 10:42:38PM +0200, Arjan Koers wrote:
The attached patch adds dump information for the Fintek F71862FG and F71863FG. According to the datasheets, the registers for both parts are exactly the same. The datasheets were downloaded from www.fintek.com.tw: F71862_V028P.pdf (Version 0.28P 2008-07-21) F71863_V029P.pdf (Version 0.29P 2008-07-21)
Tested on my Jetway NF77-N1G6-LF board with Fintek F71862FG: http://www.jetwaycomputer.com/NF77.html http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=581
Thanks, committed in r4372 with a few changes.
I only checked the F71862_V028P.pdf datasheet for now, and I noticed some stuff which I tried to fix:
- VID if missing 0xf0-0xf7 registers.
- PME/ACPI: Added missing 0xf7 register.
- I think one small default value fix somewhere, but I don't remember right now.
Uwe.
Uwe Hermann wrote:
On Sun, Jun 21, 2009 at 10:42:38PM +0200, Arjan Koers wrote:
The attached patch adds dump information for the Fintek F71862FG and F71863FG. According to the datasheets, the registers for both parts are exactly the same. The datasheets were downloaded from www.fintek.com.tw: F71862_V028P.pdf (Version 0.28P 2008-07-21) F71863_V029P.pdf (Version 0.29P 2008-07-21)
Tested on my Jetway NF77-N1G6-LF board with Fintek F71862FG: http://www.jetwaycomputer.com/NF77.html http://www.jetway.com.tw/jw/ipcboard_view.asp?productid=581
Thanks, committed in r4372 with a few changes.
Thanks for applying the patch.
I only checked the F71862_V028P.pdf datasheet for now, and I noticed some stuff which I tried to fix:
- VID if missing 0xf0-0xf7 registers.
I left those out deliberately for now until I could reboot the machine to perform some tests with the watchdog settings in the BIOS. I wasn't sure about them, because these registers aren't mentioned in the tables on page 68 .. 71 of the datasheet, but they are mentioned further down. They also aren't in the F71882FG/F71883FG version.
Your additions look good to me. Maybe the default for VID register 0xf2 can be changed to 0x00? What about the very similar F71882FG/F71883FG?
- PME/ACPI: Added missing 0xf7 register.
I missed that one.
- I think one small default value fix somewhere, but I don't remember right now.
You changed the default value of register 0x27 from 0x30 to MISC. I had chosen the not pulled-down setting as the default. Whatever default you decide to use, you should probably also change that for the F71882FG/F71883FG.
You also changed the default value of UART2 register 0xf1 from 0x00 to 0x04. My datasheet does mention 0x04. Do you have a different datasheet?
-
Arjan Koers -
Uwe Hermann