I have been reading over the mailing list and reading over the LinuxBIOS code trying to get a feel for things but I am in need of some wisdom.
It seems LDTSTOP is not used by the LinuxBIOS for the most part and I am curious why. What I have gathered so far is that it is system specific (Southbridge?) to trigger. I found some mailing list mentions of old code from years ago that is no longer in the current tree.
I am searching for a way to disable and re-enable HT links for various reasons _without_ performing a reset (for example changing link speed/width or enabling/disabling devices at runtime). It seems that LinuxBIOS has chosen to not use LDTSTOP and just use resets instead. Is this a workaround due to the difficulty of implementing LDTSTOP?
I am using a Tyan K8SRE (S2891) motherboard. The board has an Nvidia nForce 4 Pro (CK804).
Regards,
Dan Johnson
_____________________________________________________________________ This message has been checked for all known viruses by the MessageLabs Virus Scanning Service, on behalf of Celoxica Ltd.
This email and any files transmitted with it are confidential and may be legally privileged. It is intended solely for the use of the individual or entity to whom it is addressed. If you have received this in error, please contact the sender and delete the material immediately. Whilst this email has been swept for viruses, you should carry out your own virus check before opening any attachment. Celoxica Ltd accepts no liability for any loss or damage which may be caused by software viruses or interception or interruption of this email.
-
Dan Johnson