Re: [coreboot] [PATCH] CN400 / EPIA-NL [v2] patch

[Harrison, Jon (SELEX GALILEO, UK)]

Hi Peter,

Don't think I saw an Ack to this patch, is there anything else you would
like done with the patch?

Thanks,
Jon

-----Original Message-----
From: [e-mail]
[mailto:[e-mail]] On Behalf Of
[e-mail]
Sent: 08 July 2009 10:58
To: [e-mail]
Subject: coreboot Digest, Vol 53, Issue 43

------------------------------

Message: 7
Date: Wed, 8 Jul 2009 10:57:58 +0100
From: "Harrison, Jon (SELEX GALILEO, UK)"
    
To: , 
Subject: Re: [coreboot] [PATCH] CN400 / EPIA-NL [v2] patch
Message-ID:
    

Content-Type: text/plain; charset="us-ascii"

Peter,

Attached is v6 of the CN400/EPIA-N(L) patch for Coreboot V2, addressing
your earlier comments on v5 of the patch.

This has been built and tested against R4407 on an EPIA-NL 8000, fitted
with 1GB DDR400 SDRAM.

The status as follows:
1/ Board sucessfully boots and launches FILO 0.6.0 payload.
2/ VGA framebuffer seems to work OK. (with factory VGA BIOS and BOCHS
helpers)

TODO::
1/ ACPI to be integrated with build
2/ Fix file headers for accuracy
3/ Tidy up comments/whitespace stuff
4/ Get FILO to actually start a kernel from SATA

Signed-off-by: Jon Harrison

SELEX Sensors and Airborne Systems Limited
Registered Office: Sigma House, Christopher Martin Road, Basildon, Essex
SS14 3EL
A company registered in England & Wales.  Company no. 02426132
********************************************************************
This email and any attachments are confidential to the intended
recipient and may also be privileged. If you are not the intended
recipient please delete it from your system and notify the sender.
You should not copy it or use it for any purpose nor disclose or
distribute its contents to any other person.
********************************************************************