Author: uwe Date: 2007-10-16 02:13:59 +0200 (Tue, 16 Oct 2007) New Revision: 2859
Removed: trunk/LinuxBIOSv2/src/mainboard/asus/p2b/cmos.layout trunk/LinuxBIOSv2/src/mainboard/asus/p2b/debug.c trunk/LinuxBIOSv2/src/mainboard/asus/p2b/failover.c trunk/LinuxBIOSv2/src/mainboard/asus/p2b/reset.c Modified: trunk/LinuxBIOSv2/src/mainboard/asus/p2b/Config.lb trunk/LinuxBIOSv2/src/mainboard/asus/p2b/Options.lb trunk/LinuxBIOSv2/src/mainboard/asus/p2b/auto.c trunk/LinuxBIOSv2/src/mainboard/asus/p2b/chip.h trunk/LinuxBIOSv2/src/mainboard/asus/p2b/mainboard.c trunk/LinuxBIOSv2/targets/asus/p2b/Config.lb Log: Completely rip out / replace the ASUS P2B code (which wasn't really working), replacing it with a minimal, but working, framework which will be expanded. Drop a bunch of useless and duplicated files, add missing license headers.
I'm self-acking it this time, the diff is a huge unreadable mess and the old code is broken anyway...
This code is tested to build fine, and can boot a Linux kernel up to a login-prompt via FILO (IDE). This is verified on actual hardware.
Signed-off-by: Uwe Hermann uwe@hermann-uwe.de Acked-by: Uwe Hermann uwe@hermann-uwe.de
Modified: trunk/LinuxBIOSv2/src/mainboard/asus/p2b/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/asus/p2b/Config.lb 2007-10-15 21:45:29 UTC (rev 2858) +++ trunk/LinuxBIOSv2/src/mainboard/asus/p2b/Config.lb 2007-10-16 00:13:59 UTC (rev 2859) @@ -1,136 +1,131 @@ ## -## Compute the location and size of where this firmware image -## (linuxBIOS plus bootloader) will live in the boot rom chip. +## This file is part of the LinuxBIOS project. ## -if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) -else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) - default ROM_SECTION_OFFSET = 0 -end - +## Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de ## -## Compute the start location and size size of -## The linuxBIOS bootloader. +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. ## -default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) - +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. ## -## Compute where this copy of linuxBIOS will start in the boot rom +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## -default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
-## -## Compute a range of ROM that can cached to speed up linuxBIOS, -## execution speed. -## -## XIP_ROM_SIZE must be a power of 2. -## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE -## -default XIP_ROM_SIZE=65536 -default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) - -## -## Set all of the defaults for an x86 architecture -## - +if USE_FALLBACK_IMAGE + default ROM_SECTION_SIZE = FALLBACK_SIZE + default ROM_SECTION_OFFSET = (ROM_SIZE - FALLBACK_SIZE) +else + default ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE) + default ROM_SECTION_OFFSET = 0 +end +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE) +default _ROMBASE = (CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE) +default XIP_ROM_SIZE = 64 * 1024 +default XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE) arch i386 end - -## -## Build the objects we have code for in this directory. -## - driver mainboard.o - -#if HAVE_PIRQ_TABLE object irq_tables.o end -#object reset.o - -## -## Romcc output -## +if HAVE_PIRQ_TABLE + object irq_tables.o +end makerule ./failover.E - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" end - makerule ./failover.inc - depends "$(MAINBOARD)/failover.c ./romcc" - action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" + depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@" end - -makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -E -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" +makerule ./auto.E + # depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + depends "$(MAINBOARD)/auto.c ./romcc" + action "./romcc -E -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end -makerule ./auto.inc - depends "$(MAINBOARD)/auto.c option_table.h ./romcc" - action "./romcc -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" +makerule ./auto.inc + # depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + depends "$(MAINBOARD)/auto.c ./romcc" + action "./romcc -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end - -## -## Build our 16 bit and 32 bit linuxBIOS entry code -## mainboardinit cpu/x86/16bit/entry16.inc mainboardinit cpu/x86/32bit/entry32.inc ldscript /cpu/x86/16bit/entry16.lds ldscript /cpu/x86/32bit/entry32.lds - -## -## Build our reset vector (This is where linuxBIOS is entered) -## -if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds +if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end - -### Should this be in the northbridge code? mainboardinit arch/i386/lib/cpu_reset.inc - -## -## Include an id string (For safe flashing) -## mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds - -### -### This is the early phase of linuxBIOS startup -### Things are delicate and we test to see if we should -### failover to another image. -### if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds + ldscript /arch/i386/lib/failover.lds mainboardinit ./failover.inc end - -### -### O.k. We aren't just an intermediary anymore! -### - -## -## Setup RAM -## mainboardinit cpu/x86/fpu/enable_fpu.inc mainboardinit cpu/x86/mmx/enable_mmx.inc mainboardinit ./auto.inc mainboardinit cpu/x86/mmx/disable_mmx.inc
-## -## Include the secondary Configuration files -## dir /pc80 config chip.h
-chip northbridge/intel/i440bx - device pci_domain 0 on - end - - chip cpu/intel/socket_PGA370 - end - +chip northbridge/intel/i440bx # Northbridge + device pci_domain 0 on # PCI domain + device pci 0.0 on end # Host bridge + device pci 1.0 on end # AGP bridge + chip southbridge/intel/i82371eb # Southbridge + device pci 4.0 on # ISA + chip superio/winbond/w83977tf # Super I/O + device pnp 3f0.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 3f0.1 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 3f0.2 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 3f0.3 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 3f0.5 on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 # PS/2 keyboard interrupt + irq 0x72 = 12 # PS/2 mouse interrupt + end + device pnp 3f0.7 on # GPIO 1 + end + device pnp 3f0.8 on # GPIO 2 + end + device pnp 3f0.9 on # GPIO 3 + end + device pnp 3f0.a on # ACPI + end + end + end + device pci 4.1 on end # IDE + device pci 4.2 on end # USB + device pci 4.3 on end # ACPI + register "ide0_enable" = "1" + register "ide1_enable" = "1" + end + end + chip cpu/intel/socket_PGA370 + end end -
Modified: trunk/LinuxBIOSv2/src/mainboard/asus/p2b/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/asus/p2b/Options.lb 2007-10-15 21:45:29 UTC (rev 2858) +++ trunk/LinuxBIOSv2/src/mainboard/asus/p2b/Options.lb 2007-10-16 00:13:59 UTC (rev 2859) @@ -1,3 +1,23 @@ +## +## This file is part of the LinuxBIOS project. +## +## Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + uses HAVE_MP_TABLE uses HAVE_PIRQ_TABLE uses USE_FALLBACK_IMAGE @@ -40,117 +60,30 @@ uses TTYS0_LCS uses CONFIG_UDELAY_TSC
-## ROM_SIZE is the size of boot ROM that this board will use. -default ROM_SIZE = 256*1024 - -### -### Build options -### - -## -## Build code for the fallback boot -## -default HAVE_FALLBACK_BOOT=1 - -## -## no MP table -## -default HAVE_MP_TABLE=0 - -## -## Build code to reset the motherboard from linuxBIOS -## -default HAVE_HARD_RESET=0 - -## -## Build code to export a programmable irq routing table -## -default HAVE_PIRQ_TABLE=0 -default IRQ_SLOT_COUNT=4 -#object irq_tables.o - -## -## Build code to export a CMOS option table -## -default HAVE_OPTION_TABLE=0 - -### -### LinuxBIOS layout values -### - -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +default ROM_SIZE = 256 * 1024 +default HAVE_FALLBACK_BOOT = 1 +default HAVE_MP_TABLE = 0 +default HAVE_HARD_RESET = 0 +default HAVE_PIRQ_TABLE = 0 +default IRQ_SLOT_COUNT = 4 +default HAVE_OPTION_TABLE = 0 default ROM_IMAGE_SIZE = 65536 default FALLBACK_SIZE = 131072 - -## -## Use a small 8K stack -## -default STACK_SIZE=0x2000 - -## -## Use a small 16K heap -## -default HEAP_SIZE=0x4000 - -## -## Only use the option table in a normal image -## +default STACK_SIZE = 0x2000 +default HEAP_SIZE = 0x4000 #default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE default USE_OPTION_TABLE = 0 - default _RAMBASE = 0x00004000 +default CONFIG_ROM_PAYLOAD = 1 +default CROSS_COMPILE = "" +default CC = "$(CROSS_COMPILE)gcc -m32" +default HOSTCC = "gcc" +default CONFIG_CONSOLE_SERIAL8250 = 1 +default TTYS0_BAUD = 115200 +default TTYS0_BASE = 0x3f8 +default TTYS0_LCS = 0x3 +default DEFAULT_CONSOLE_LOGLEVEL = 9 +default MAXIMUM_CONSOLE_LOGLEVEL = 9 +default CONFIG_UDELAY_TSC = 1
-default CONFIG_ROM_PAYLOAD = 1 - -## -## The default compiler -## -default CROSS_COMPILE="" -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" - -## -## The Serial Console -## - -# To Enable the Serial Console -default CONFIG_CONSOLE_SERIAL8250=1 - -## Select the serial console baud rate -default TTYS0_BAUD=115200 -#default TTYS0_BAUD=57600 -#default TTYS0_BAUD=38400 -#default TTYS0_BAUD=19200 -#default TTYS0_BAUD=9600 -#default TTYS0_BAUD=4800 -#default TTYS0_BAUD=2400 -#default TTYS0_BAUD=1200 - -# Select the serial console base port -default TTYS0_BASE=0x3f8 - -# Select the serial protocol -# This defaults to 8 data bits, 1 stop bit, and no parity -default TTYS0_LCS=0x3 - -## -### Select the linuxBIOS loglevel -## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## DEBUG 8 debug-level messages -## SPEW 9 Way too many details - -## Request this level of debugging output -default DEFAULT_CONSOLE_LOGLEVEL=9 -## At a maximum only compile in this level of debugging -default MAXIMUM_CONSOLE_LOGLEVEL=9 - -default CONFIG_UDELAY_TSC=1 end -
Modified: trunk/LinuxBIOSv2/src/mainboard/asus/p2b/auto.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/asus/p2b/auto.c 2007-10-15 21:45:29 UTC (rev 2858) +++ trunk/LinuxBIOSv2/src/mainboard/asus/p2b/auto.c 2007-10-16 00:13:59 UTC (rev 2859) @@ -32,33 +32,16 @@ #include "southbridge/intel/i82371eb/i82371eb_early_smbus.c" #include "superio/winbond/w83977tf/w83977tf_early_serial.c" #include "northbridge/intel/i440bx/raminit.h" +#include "mainboard/bitworks/ims/debug.c" /* FIXME */ +#include "pc80/udelay_io.c" +#include "lib/delay.c" #include "cpu/x86/mtrr/earlymtrr.c" #include "cpu/x86/bist.h"
#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1)
-void udelay(int usecs) +static inline int spd_read_byte(unsigned int device, unsigned int address) { - int i; - for(i = 0; i < usecs; i++) - outb(i&0xff, 0x80); -} - -#include "debug.c" -#include "lib/delay.c" - -static void enable_shadow_ram(void) -{ - uint8_t shadowreg; - /* dev 0 for northbridge */ - shadowreg = pci_read_config8(0, 0x59); - /* 0xf0000-0xfffff */ - shadowreg |= 0x30; - pci_write_config8(0, 0x59, shadowreg); -} - -static inline int spd_read_byte(unsigned device, unsigned address) -{ return smbus_read_byte(device, address); }
@@ -70,47 +53,21 @@ { static const struct mem_controller memctrl[] = { { - .d0 = PCI_DEV(0, 0, 0), - .channel0 = { - (0xa << 3) | 0, - (0xa << 3) | 1, - (0xa << 3) | 2, - (0xa << 3) | 3, - }, - } + .d0 = PCI_DEV(0, 0, 0), + .channel0 = {0x50, 0x51, 0x52, 0x53}, + } }; - - if (bist == 0) { + + if (bist == 0) early_mtrr_init(); - } + w83977tf_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init();
- /* Halt if there was a built in self test failure */ report_bist_failure(bist); - - enable_shadow_ram(); - enable_smbus(); - dump_spd_registers(&memctrl[0]); - sdram_initialize(sizeof(memctrl) / sizeof(memctrl[0]), memctrl); - - /* Check whether RAM is working. - * - * Do _not_ check the area from 640 KB - 1 MB, as that's not really - * RAM, but rather reserved for various other things: - * - * - 640 KB - 768 KB: Video Buffer Area - * - 768 KB - 896 KB: Expansion Area - * - 896 KB - 960 KB: Extended System BIOS Area - * - 960 KB - 1 MB: Memory (BIOS Area) - System BIOS Area - * - * Trying to check these areas will fail. - */ - /* TODO: This is currently hardcoded to check 64 MB. */ - ram_check(0x00000000, 0x0009ffff); /* 0 - 640 KB */ - ram_check(0x00100000, 0x007c0000); /* 1 MB - 64 MB */ + ram_check(0, 640 * 1024); }
Modified: trunk/LinuxBIOSv2/src/mainboard/asus/p2b/chip.h =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/asus/p2b/chip.h 2007-10-15 21:45:29 UTC (rev 2858) +++ trunk/LinuxBIOSv2/src/mainboard/asus/p2b/chip.h 2007-10-16 00:13:59 UTC (rev 2859) @@ -1,3 +1,23 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + extern struct chip_operations mainboard_asus_p2b_ops;
struct mainboard_asus_p2b_config {
Deleted: trunk/LinuxBIOSv2/src/mainboard/asus/p2b/cmos.layout =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/asus/p2b/cmos.layout 2007-10-15 21:45:29 UTC (rev 2858) +++ trunk/LinuxBIOSv2/src/mainboard/asus/p2b/cmos.layout 2007-10-16 00:13:59 UTC (rev 2859) @@ -1,74 +0,0 @@ -entries - -#start-bit length config config-ID name -#0 8 r 0 seconds -#8 8 r 0 alarm_seconds -#16 8 r 0 minutes -#24 8 r 0 alarm_minutes -#32 8 r 0 hours -#40 8 r 0 alarm_hours -#48 8 r 0 day_of_week -#56 8 r 0 day_of_month -#64 8 r 0 month -#72 8 r 0 year -#80 4 r 0 rate_select -#84 3 r 0 REF_Clock -#87 1 r 0 UIP -#88 1 r 0 auto_switch_DST -#89 1 r 0 24_hour_mode -#90 1 r 0 binary_values_enable -#91 1 r 0 square-wave_out_enable -#92 1 r 0 update_finished_enable -#93 1 r 0 alarm_interrupt_enable -#94 1 r 0 periodic_interrupt_enable -#95 1 r 0 disable_clock_updates -#96 288 r 0 temporary_filler -0 384 r 0 reserved_memory -384 1 e 4 boot_option -385 1 e 4 last_boot -386 1 e 1 ECC_memory -388 4 r 0 reboot_bits -392 3 e 5 baud_rate -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -416 4 e 7 boot_first -420 4 e 7 boot_second -424 4 e 7 boot_third -428 4 h 0 boot_index -432 8 h 0 boot_countdown -1008 16 h 0 check_sum - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Network -7 1 HDD -7 2 Floppy -7 8 Fallback_Network -7 9 Fallback_HDD -7 10 Fallback_Floppy -#7 3 ROM - -checksums - -checksum 392 1007 1008 - -
Deleted: trunk/LinuxBIOSv2/src/mainboard/asus/p2b/debug.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/asus/p2b/debug.c 2007-10-15 21:45:29 UTC (rev 2858) +++ trunk/LinuxBIOSv2/src/mainboard/asus/p2b/debug.c 2007-10-16 00:13:59 UTC (rev 2859) @@ -1,66 +0,0 @@ - -static void print_debug_pci_dev(unsigned dev) -{ - print_debug("PCI: "); - print_debug_hex8((dev >> 16) & 0xff); - print_debug_char(':'); - print_debug_hex8((dev >> 11) & 0x1f); - print_debug_char('.'); - print_debug_hex8((dev >> 8) & 7); -} - -static void print_pci_devices(void) -{ - device_t dev; - for(dev = PCI_DEV(0, 0, 0); - dev <= PCI_DEV(0, 0x1f, 0x7); - dev += PCI_DEV(0,0,1)) { - uint32_t id; - id = pci_read_config32(dev, PCI_VENDOR_ID); - if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0x0000)) { - continue; - } - print_debug_pci_dev(dev); - print_debug("\r\n"); - } -} - -static void dump_pci_device(unsigned dev) -{ - int i; - print_debug_pci_dev(dev); - print_debug("\r\n"); - - for(i = 0; i <= 255; i++) { - unsigned char val; - if ((i & 0x0f) == 0) { - print_debug_hex8(i); - print_debug_char(':'); - } - val = pci_read_config8(dev, i); - print_debug_char(' '); - print_debug_hex8(val); - if ((i & 0x0f) == 0x0f) { - print_debug("\r\n"); - } - } -} - -static void dump_pci_devices(void) -{ - device_t dev; - for(dev = PCI_DEV(0, 0, 0); - dev <= PCI_DEV(0, 0x1f, 0x7); - dev += PCI_DEV(0,0,1)) { - uint32_t id; - id = pci_read_config32(dev, PCI_VENDOR_ID); - if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0xffff) || - (((id >> 16) & 0xffff) == 0x0000)) { - continue; - } - dump_pci_device(dev); - } -}
Deleted: trunk/LinuxBIOSv2/src/mainboard/asus/p2b/failover.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/asus/p2b/failover.c 2007-10-15 21:45:29 UTC (rev 2858) +++ trunk/LinuxBIOSv2/src/mainboard/asus/p2b/failover.c 2007-10-16 00:13:59 UTC (rev 2859) @@ -1,32 +0,0 @@ -#define ASSEMBLY 1 -#include <stdint.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include "arch/romcc_io.h" -#include "pc80/mc146818rtc_early.c" - -static unsigned long main(unsigned long bist) -{ - /* This is the primary cpu how should I boot? */ - if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - asm volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist) /* inputs */ - : /* clobbers */ - ); - cpu_reset: - asm volatile ("jmp __cpu_reset" - : /* outputs */ - : "a"(bist) /* inputs */ - : /* clobbers */ - ); - fallback_image: - return bist; -}
Modified: trunk/LinuxBIOSv2/src/mainboard/asus/p2b/mainboard.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/asus/p2b/mainboard.c 2007-10-15 21:45:29 UTC (rev 2858) +++ trunk/LinuxBIOSv2/src/mainboard/asus/p2b/mainboard.c 2007-10-16 00:13:59 UTC (rev 2859) @@ -1,3 +1,23 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + #include <device/device.h> #include "chip.h"
Deleted: trunk/LinuxBIOSv2/src/mainboard/asus/p2b/reset.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/asus/p2b/reset.c 2007-10-15 21:45:29 UTC (rev 2858) +++ trunk/LinuxBIOSv2/src/mainboard/asus/p2b/reset.c 2007-10-16 00:13:59 UTC (rev 2859) @@ -1,43 +0,0 @@ -#if 0 -//#include "arch/romcc_io.h" -#include <arch/io.h> - -typedef unsigned device_t; - -#define PCI_DEV(BUS, DEV, FN) ( \ - (((BUS) & 0xFF) << 16) | \ - (((DEV) & 0x1f) << 11) | \ - (((FN) & 0x7) << 8)) - -static void pci_write_config8(device_t dev, unsigned where, unsigned char value) -{ - unsigned addr; - addr = dev | where; - outl(0x80000000 | (addr & ~3), 0xCF8); - outb(value, 0xCFC + (addr & 3)); -} - -static void pci_write_config32(device_t dev, unsigned where, unsigned value) -{ - unsigned addr; - addr = dev | where; - outl(0x80000000 | (addr & ~3), 0xCF8); - outl(value, 0xCFC); -} - -static unsigned pci_read_config32(device_t dev, unsigned where) -{ - unsigned addr; - addr = dev | where; - outl(0x80000000 | (addr & ~3), 0xCF8); - return inl(0xCFC); -} - -#include "../../../northbridge/amd/amdk8/reset_test.c" - -void hard_reset(void) -{ - set_bios_reset(); - pci_write_config8(PCI_DEV(1, 0x04, 0), 0x47, 1); -} -#endif
Modified: trunk/LinuxBIOSv2/targets/asus/p2b/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/asus/p2b/Config.lb 2007-10-15 21:45:29 UTC (rev 2858) +++ trunk/LinuxBIOSv2/targets/asus/p2b/Config.lb 2007-10-16 00:13:59 UTC (rev 2859) @@ -1,29 +1,40 @@ -# Config file for asus p2b board -# This will make a target directory of ./p2b +## +## This file is part of the LinuxBIOS project. +## +## Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +##
target p2b mainboard asus/p2b
-option ROM_SIZE=256*1024 +option ROM_SIZE = 256 * 1024
romimage "normal" - option USE_FALLBACK_IMAGE=0 - option ROM_IMAGE_SIZE=0x10000 - option LINUXBIOS_EXTRA_VERSION=".0Normal" -# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf -# payload ../../../../tg3--ide_disk.zelf -# payload ../../../../../lnxieepro100.ebi - payload /etc/hosts + option USE_FALLBACK_IMAGE = 0 + option ROM_IMAGE_SIZE = 64 * 1024 + option LINUXBIOS_EXTRA_VERSION = ".0Normal" + payload /tmp/filo.elf end
-romimage "fallback" - option USE_FALLBACK_IMAGE=1 - option ROM_IMAGE_SIZE=0x10000 - option LINUXBIOS_EXTRA_VERSION=".0Fallback" -# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf -# payload ../../../../tg3--ide_disk.zelf -# payload ../../../../../lnxieepro100.ebia - payload /etc/hosts +romimage "fallback" + option USE_FALLBACK_IMAGE = 1 + option ROM_IMAGE_SIZE = 64 * 1024 + option LINUXBIOS_EXTRA_VERSION = ".0Fallback" + payload /tmp/filo.elf end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
-
svn＠openbios.org