Patch set updated for coreboot: a2eaa4f OXPCIe: Reinitialize UART after pci_dev_set_resources()

[Stefan Reinauer]

Stefan Reinauer ([e-mail]) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/692

-gerrit

commit a2eaa4fb7bb98f171d54523f9af06a0794f14013
Author: Stefan Reinauer 
Date:   Tue May 10 12:54:56 2011 -0700

OXPCIe: Reinitialize UART after pci_dev_set_resources()

... and only pull in early init code if the OXPCIe is used for console.

Change-Id: I01feca3b9e8376a75c17554ba1bd200d523dff8d
    Signed-off-by: Stefan Reinauer 
---
 src/drivers/oxford/oxpcie/Makefile.inc |    2 ++
 src/drivers/oxford/oxpcie/oxpcie.c     |   14 ++++++++++++--
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/src/drivers/oxford/oxpcie/Makefile.inc b/src/drivers/oxford/oxpcie/Makefile.inc
index 7d3a26f..7f4aa58 100644
--- a/src/drivers/oxford/oxpcie/Makefile.inc
+++ b/src/drivers/oxford/oxpcie/Makefile.inc
@@ -1,3 +1,5 @@
 driver-$(CONFIG_DRIVERS_OXFORD_OXPCIE) += oxpcie.c

+ifeq ($(CONFIG_CONSOLE_SERIAL8250MEM),y)
 romstage-$(CONFIG_DRIVERS_OXFORD_OXPCIE) += oxpcie_early.c
+endif
diff --git a/src/drivers/oxford/oxpcie/oxpcie.c b/src/drivers/oxford/oxpcie/oxpcie.c
index e1fb65f..8afdd1f 100644
--- a/src/drivers/oxford/oxpcie/oxpcie.c
+++ b/src/drivers/oxford/oxpcie/oxpcie.c
@@ -23,7 +23,6 @@
 #include <device/pci_ids.h>
 #include <console/console.h>
 #include <arch/io.h>
-#include <uart8250.h>

static void oxford_oxpcie_enable(device_t dev)
 {
@@ -41,9 +40,20 @@ static void oxford_oxpcie_enable(device_t dev)
    		(read32(res->base + 4) & 3));
 }

+
+static void oxford_oxpcie_set_resources(struct device *dev)
+{
+	pci_dev_set_resources(dev);
+
+#if CONFIG_CONSOLE_SERIAL8250MEM
+	/* Re-initialize OXPCIe base address after set_resources */
+	uartmem_init();
+#endif
+}
+
 static struct device_operations oxford_oxpcie_ops = {
    .read_resources   = pci_dev_read_resources,
-	.set_resources    = pci_dev_set_resources,
+	.set_resources    = oxford_oxpcie_set_resources,
    .enable_resources = pci_dev_enable_resources,
    .init             = oxford_oxpcie_enable,
    .scan_bus         = 0,