Well, I also made a linuxbios port for epia-m and ADLO and bochs bios patch
which can run original vgabios of epia-m (Adam helped me a lot). So I can
see vga text console and also I can run XFree86 or what so ever. And also
my collegue made a framebuffer driver. However, because of NDA, I'm afraid
I can't share it with you for now. (I don't know anything about specific
details of NDA, but my boss told me to do so until our project is done).
However, as for ADLO, I think If you have the CLE266 programming guide, you
can do it by implementing bios APIs of chapter 7 onto bochs bios code and
slight modification of loader.s of ADLO.
BTW, Andrew I have a question to you how you can release code. You may need
via documents which require NDA. Is VIA approved or sponsoring you?
From: Andrew Ip [mailto:firstname.lastname@example.org]
Sent: Sunday, April 27, 2003 5:24 PM
To: Adam Sulmicki
Subject: Re: [COMMIT] epia-m support
Sounds like great news. Now if I only had an
EPIA-M board :-P
FYI: people have gotten VGA and ADLO (fully working; with
VGA!) to work
successfully under EPIA-M. It seems there may be
issues to it
may be few months before they can contribute
Is it? I would like to try it first.
Tel: (852) 2542 2046
Fax: (852) 2542 2036
Mobile: (852) 9201 9866
Unit 202B 2/F Lai Cheong Factory Building,
479-479A Castle Peak Road,
Lai Chi Kok, Kowloon,
Tel: (852)2542 2046
Fax: (852)2542 2036
For public pgp key, please obtain it from http://www.keyserver.net/en
Linuxbios mailing list