Re: [coreboot] VGA and Asus a8v-e_se

[Rudolf Marek]

Hi,

To fix the powernow add following after following line into dsdt.asl

Processor (_PR.CPU1, 0x01, 0x000000, 0x00) {}

Scope (_PR.CPU0)
     {
         Name (_PCT, Package (0x02)
         {
             ResourceTemplate ()
             {
                 Register (FFixedHW,
                     0x00,               // Bit Width
                     0x00,               // Bit Offset
                     0x0000000000000000, // Address
                     ,)
             },

ResourceTemplate ()
             {
                 Register (FFixedHW,
                     0x00,               // Bit Width
                     0x00,               // Bit Offset
                     0x0000000000000000, // Address
                     ,)
             }
         })
         Name (_PSS, Package (0x04)
         {
             Package (0x06)
             {
                 0x00000898,
                 0x00014D34,
                 0x00000064,
                 0x00000009,
                 0xE020298E,
                 0x0000018E
             },

Package (0x06)
             {
                 0x000007D0,
                 0x00014438,
                 0x00000064,
                 0x00000009,
                 0xE0202A0C,
                 0x0000020C
             },

Package (0x06)
             {
                 0x00000708,
                 0x00011300,
                 0x00000064,
                 0x00000009,
                 0xE0202A8A,
                 0x0000028A
             },

Package (0x06)
             {
                 0x000003E8,
                 0x00008D04,
                 0x00000064,
                 0x00000009,
                 0xE0202C82,
                 0x00000482
             }
         })
         Name (_PPC, 0x00)
     }

Then just recompile Coreboot. I'm using the powernowd and it does work.

If possible could you send me the lspci -xxx when the coreboot is running too? 
You may also try /LinuxBIOSv2/src/southbridge/via/k8t890/k8t890_pcie.c to edit 
the init function:
static void peg_init(struct device *dev)

I think you can put return at the beginning of the function. There is a chance 
that it will work without anything else. I think problem is in card reset.

I have in plan to cleanup the PCIe init a bit but frankly I dont know if the 
reset is needed and even not sure about the link retrain.

Thanks,
Rudolf

VGA and Asus a8v-e_se

[Jonathan Rogers]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Rudolf Marek wrote:
> Hi,
>
> To fix the powernow add following after following line into dsdt.asl
>
> Processor (_PR.CPU1, 0x01, 0x000000, 0x00) {}
>
> Scope (_PR.CPU0)
>     {
>         Name (_PCT, Package (0x02)
>         {
>             ResourceTemplate ()
>             {
>                 Register (FFixedHW,
>                     0x00,               // Bit Width
>                     0x00,               // Bit Offset
>                     0x0000000000000000, // Address
>                     ,)
>             },
>         ResourceTemplate ()
>         {
>             Register (FFixedHW,
>                 0x00,               // Bit Width
>                 0x00,               // Bit Offset
>                 0x0000000000000000, // Address
>                 ,)
>         }
>     })
>     Name (_PSS, Package (0x04)
>     {
>         Package (0x06)
>         {
>             0x00000898,
>             0x00014D34,
>             0x00000064,
>             0x00000009,
>             0xE020298E,
>             0x0000018E
>         },
>
>         Package (0x06)
>         {
>             0x000007D0,
>             0x00014438,
>             0x00000064,
>             0x00000009,
>             0xE0202A0C,
>             0x0000020C
>         },
>
>         Package (0x06)
>         {
>             0x00000708,
>             0x00011300,
>             0x00000064,
>             0x00000009,
>             0xE0202A8A,
>             0x0000028A
>         },
>
>         Package (0x06)
>         {
>             0x000003E8,
>             0x00008D04,
>             0x00000064,
>             0x00000009,
>             0xE0202C82,
>             0x00000482
>         }
>     })
>     Name (_PPC, 0x00)
> }
>
> Then just recompile Coreboot. I'm using the powernowd and it does work.
>
> If possible could you send me the lspci -xxx when the coreboot is
> running too? You may also try
> /LinuxBIOSv2/src/southbridge/via/k8t890/k8t890_pcie.c to edit the init
> function:
> static void peg_init(struct device *dev)
>
> I think you can put return at the beginning of the function. There is a
> chance that it will work without anything else. I think problem is in
> card reset.
>
> I have in plan to cleanup the PCIe init a bit but frankly I dont know if
> the reset is needed and even not sure about the link retrain.

Your instructions about both Powernow! and VGA BIOS were right on. I now
have my Ubuntu system running with both video and frequency scaling
after booting from coreboot. I have attached the output from "sudo lspci
- -vvvxxx" after making the above changes and booting coreboot.

All of the regular PCI devices seem to be on bus 00, while the onboard
PCIe network interface is on bus 05. The PCIe x16 card is on bus 02.
Before I bypassed the peg_init function, all of the PCI devices except
the Nvidia PCIe x16 video card seemed to work. When I ran lspci, it made
no mention of any device on bus 02 or any vga or nvidia device; it did
however see the network interface on bus 05. I neglected to save that
output, but I can un-bypass peg_init and save the lspci output if it
will be helpful.

BTW, how are flash chip sizes detected? All of the images I've generated
using coreboot or saved using flashrom on this board are 512KiB, but the
manual indicates that it has 4MiB of flash. Is the manual lying? I'm
curious because I'm wondering if it's possible to use a Linux payload
with this board, but I realize that Filo or etherboot is probably
sufficient as far as minimizing boot time. Thank you very much for your
insight and tolerance of my limited knowledge.

Jonathan Rogers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFHzMrdMs6f82yVS5wRAlJuAKDfO80g65SlNXMnW5yYx4UEI7fTHwCgjRft
4LpXmmZ1i3WrK9CP9tz3q18=
=SNFi
-----END PGP SIGNATURE-----

00:00.0 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
    Latency: 64
    Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
    Capabilities: [80] AGP version 3.5
    	Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
    	Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
    Capabilities: [50] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [60] HyperTransport: Slave or Primary Interface
    	!!! Possibly incomplete decoding
    	Command: BaseUnitID=0 UnitCnt=3 MastHost- DefDir-
    	Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
    	Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
    	Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
    	Link Config 1: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit
    	Revision ID: 1.02
    Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration
00: 06 11 38 02 06 00 30 22 00 00 00 06 00 40 80 00
10: 08 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: bf 63 08 00 00 00 00 00 01 00 1f c4 00 04 00 01
50: 01 60 02 00 00 00 00 00 08 00 01 80 03 80 17 00
60: 08 58 60 00 20 00 11 11 d0 00 00 00 22 06 75 00
70: 02 00 00 00 00 00 00 00 00 00 00 00 08 00 00 00
80: 02 50 35 00 07 02 00 1f 00 00 00 00 28 00 00 00
90: 80 00 00 00 00 0f 01 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 08 00 00 98 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:00.1 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
00: 06 11 38 12 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 81 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:00.2 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
00: 06 11 38 22 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 13 8e 0e 31 30 3c 80 86 7f cf 44 22 24 00 22 30
b0: 3f 13 00 00 02 00 00 00 00 00 00 00 00 00 00 00
c0: 20 aa aa 02 50 50 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:00.3 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
00: 06 11 38 32 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 22 22 00 00 00 00 e4 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: ff ff ff 30 00 40 39 00 40 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:00.4 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
00: 06 11 38 42 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 0e 00 00 00 00 00 00 00 00 00

00:00.5 PIC: VIA Technologies, Inc. K8T890 I/O APIC Interrupt Controller (prog-if 20 [IO(X)-APIC])
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
00: 06 11 38 52 06 00 00 00 00 20 00 08 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 8c 00 05 00 00 00 20 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 8b 0e 00 00 23 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 95 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:00.7 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
00: 06 11 38 72 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 64 3b 88 82 82 44 00 30 a3 39 88 80 82 44 00 00
50: 00 00 00 00 00 00 01 40 08 00 01 80 03 80 17 00
60: 00 ff ff f0 00 00 00 00 00 00 00 00 00 00 00 00
70: c2 c8 ee 01 24 0f 50 08 01 00 00 00 7f 00 12 12
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 06 01 00 e0 37 88 88 61 49 98 77 11 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 39 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fff00000-000fffff
    Prefetchable memory behind bridge: fff00000-000fffff
    Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: [70] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 88 b1 07 00 30 02 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 20 02
20: f0 ff 00 00 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 70 00 00 00 00 00 00 00 00 00 17 00
40: 91 40 00 44 31 3a 88 b1 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 0e 70 35 00 07 02 00 1f 00 00 00 00 28 00 00 00
90: 80 00 00 00 00 08 01 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: bf 63 08 00 00 00 00 00 00 00 1f c4 00 04 00 00
c0: 08 00 0b ff 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 00001000-00001fff
    Memory behind bridge: f0000000-f20fffff
    Prefetchable memory behind bridge: d0000000-dfffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    	Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    	Device: Latency L0s <1us, L1 unlimited
    	Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    	Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    	Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    	Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
    	Link: Latency L0s <64ns, L1 <1us
    	Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
    	Link: Speed 2.5Gb/s, Width x16
    	Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
    	Slot: Number 0, PowerLimit 0.000000
    	Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
    	Slot: AttnInd Unknown, PwrInd Unknown, Power-
    	Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [68] Power Management version 2
    	Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable+
    	Address: 00000000fee0100c  Data: 4171
    	Masking: 00000001  Pending: 00000000
00: 06 11 38 a2 07 04 10 00 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 00 10 10 00 00
20: 00 f0 00 f2 00 d0 f0 df 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 01 0b 00
40: 10 68 41 01 01 0f 00 00 0f 00 12 00 01 0d 00 00
50: 00 00 01 01 60 00 00 00 00 00 48 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00
70: 05 00 81 01 0c 10 e0 fe 00 00 00 00 71 41 00 00
80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 04 00 00 10 00 00 00 00 00 00 00 00 00 00 00
b0: 0c 12 40 80 00 00 03 00 00 00 00 00 00 00 00 00
c0: 03 00 01 00 44 44 44 44 44 44 44 44 00 00 00 00
d0: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 0c 07 01 8a f8 00 00 00 01 82 f8 00 00 00 00 00
f0: 00 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00

00:03.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode])
    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fff00000-000fffff
    Prefetchable memory behind bridge: fff00000-000fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    	Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    	Device: Latency L0s <64ns, L1 unlimited
    	Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    	Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    	Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    	Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 1
    	Link: Latency L0s <64ns, L1 <1us
    	Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
    	Link: Speed 2.5Gb/s, Width x0
    	Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
    	Slot: Number 0, PowerLimit 0.000000
    	Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
    	Slot: AttnInd Unknown, PwrInd Unknown, Power-
    	Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [68] Power Management version 2
    	Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable+
    	Address: 00000000fee0100c  Data: 4179
    	Masking: 00000001  Pending: 00000000
00: 06 11 38 c2 04 04 10 00 00 00 04 06 00 00 81 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 f0 00 00 00
20: f0 ff 00 00 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 01 03 00
40: 10 68 41 01 01 0e 00 00 0f 00 10 00 41 0c 00 01
50: 00 00 01 00 60 00 00 00 00 00 48 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00
70: 05 00 81 01 0c 10 e0 fe 00 00 00 00 79 41 00 00
80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 04 00 00 10 00 00 00 00 00 00 00 00 00 00 00
b0: 3b f0 40 80 00 00 03 00 00 00 00 00 00 00 00 00
c0: 03 00 01 00 44 44 00 00 00 00 00 00 00 00 00 00
d0: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 0b 01 8a f8 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00

00:03.1 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode])
    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fff00000-000fffff
    Prefetchable memory behind bridge: fff00000-000fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    	Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    	Device: Latency L0s <64ns, L1 unlimited
    	Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    	Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    	Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    	Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
    	Link: Latency L0s <64ns, L1 <1us
    	Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
    	Link: Speed 2.5Gb/s, Width x0
    	Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
    	Slot: Number 0, PowerLimit 0.000000
    	Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
    	Slot: AttnInd Unknown, PwrInd Unknown, Power-
    	Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [68] Power Management version 2
    	Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable+
    	Address: 00000000fee0100c  Data: 4181
    	Masking: 00000001  Pending: 00000000
00: 06 11 38 d2 04 04 10 00 00 00 04 06 00 00 81 00
10: 00 00 00 00 00 00 00 00 00 04 04 00 f0 00 00 00
20: f0 ff 00 00 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 02 03 00
40: 10 68 41 01 01 0e 00 00 0f 00 10 00 11 0c 00 02
50: 00 00 01 00 60 00 00 00 00 00 48 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00
70: 05 00 81 01 0c 10 e0 fe 00 00 00 00 81 41 00 00
80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 04 00 00 10 00 00 00 00 00 00 00 00 00 00 00
b0: 3b f0 40 80 00 00 03 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00
d0: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 0b 00 02 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:03.2 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
    I/O behind bridge: 00002000-00002fff
    Memory behind bridge: f2100000-f21fffff
    Prefetchable memory behind bridge: fff00000-000fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    	Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    	Device: Latency L0s <512ns, L1 unlimited
    	Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    	Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    	Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    	Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
    	Link: Latency L0s <64ns, L1 <1us
    	Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
    	Link: Speed 2.5Gb/s, Width x1
    	Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
    	Slot: Number 0, PowerLimit 0.000000
    	Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
    	Slot: AttnInd Unknown, PwrInd Unknown, Power-
    	Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [68] Power Management version 2
    	Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable+
    	Address: 00000000fee0100c  Data: 4189
    	Masking: 00000001  Pending: 00000000
00: 06 11 38 e2 07 04 10 00 00 00 04 06 00 00 81 00
10: 00 00 00 00 00 00 00 00 00 05 05 00 20 20 00 00
20: 10 f2 10 f2 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 03 03 00
40: 10 68 41 01 c1 0e 00 00 0f 00 12 00 11 0c 00 03
50: 00 00 11 00 60 00 00 00 00 00 48 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00
70: 05 00 81 01 0c 10 e0 fe 00 00 00 00 89 41 00 00
80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 04 00 00 10 00 00 00 00 00 00 00 00 00 00 00
b0: 3b f0 40 80 00 00 03 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00
d0: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 0b 00 02 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:03.3 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode])
    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fff00000-000fffff
    Prefetchable memory behind bridge: fff00000-000fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    	Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    	Device: Latency L0s <64ns, L1 unlimited
    	Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    	Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    	Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    	Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4
    	Link: Latency L0s <64ns, L1 <1us
    	Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
    	Link: Speed 2.5Gb/s, Width x0
    	Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
    	Slot: Number 0, PowerLimit 0.000000
    	Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
    	Slot: AttnInd Unknown, PwrInd Unknown, Power-
    	Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [68] Power Management version 2
    	Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable+
    	Address: 00000000fee0100c  Data: 4191
    	Masking: 00000001  Pending: 00000000
00: 06 11 38 f2 04 04 10 00 00 00 04 06 00 00 81 00
10: 00 00 00 00 00 00 00 00 00 06 06 00 f0 00 00 00
20: f0 ff 00 00 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 04 03 00
40: 10 68 41 01 01 0e 00 00 0f 00 10 00 11 0c 00 04
50: 00 00 01 00 60 00 00 00 00 00 48 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00
70: 05 00 81 01 0c 10 e0 fe 00 00 00 00 91 41 00 00
80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 04 00 00 10 00 00 00 00 00 00 00 00 00 00 00
b0: 3b f0 40 80 00 00 03 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00
d0: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 0b 00 02 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    Subsystem: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64
    Interrupt: pin B routed to IRQ 20
    Region 0: I/O ports at 3ca0 [size=8]
    Region 1: I/O ports at 3cc0 [size=4]
    Region 2: I/O ports at 3cb0 [size=8]
    Region 3: I/O ports at 3cd0 [size=4]
    Region 4: I/O ports at 3c80 [size=16]
    Region 5: I/O ports at 3000 [size=256]
    Capabilities: [c0] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 49 31 05 00 90 02 80 8f 01 01 00 40 80 00
10: a1 3c 00 00 c1 3c 00 00 b1 3c 00 00 d1 3c 00 00
20: 81 3c 00 00 01 30 00 00 00 00 00 00 06 11 49 31
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 02 00 00
40: 23 03 f1 44 0e af 00 00 00 82 65 03 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 10 10 00 05 00 20 00
60: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 01 00 01 00 10 00 00 00
80: 00 00 00 00 00 00 00 00 00 b0 f4 3c 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 80 02 49 31 06 11 49 31 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64
    Interrupt: pin A routed to IRQ 20
    Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
    Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
    Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
    Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
    Region 4: I/O ports at 3c90 [size=16]
    Capabilities: [c0] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 71 05 85 00 90 02 06 8a 01 01 00 40 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 91 3c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 01 00 00
40: 2f f2 09 05 18 8c c0 00 a8 a8 a8 20 ff 00 b6 20
50: f0 ff ff e6 0c 00 00 00 a8 a8 a8 a8 00 00 00 00
60: 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00
70: 02 01 00 00 00 00 00 00 82 01 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 06 00 71 05 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 09 00 00 00 00 00 00 00 00 00

00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 21
    Region 4: I/O ports at 3c00 [size=32]
    Capabilities: [80] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 38 30 05 00 10 02 81 00 03 0c 10 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 3c 00 00 00 00 00 00 00 00 00 00 06 11 38 30
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 01 00 00
40: 40 10 03 00 00 00 00 00 00 0b a0 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00

00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 21
    Region 4: I/O ports at 3c20 [size=32]
    Capabilities: [80] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 38 30 05 00 10 02 81 00 03 0c 10 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 21 3c 00 00 00 00 00 00 00 00 00 00 06 11 38 30
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 01 00 00
40: 40 10 03 00 00 00 00 00 00 0b a0 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00

00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 21
    Region 4: I/O ports at 3c40 [size=32]
    Capabilities: [80] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 38 30 05 00 10 02 81 00 03 0c 10 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 41 3c 00 00 00 00 00 00 00 00 00 00 06 11 38 30
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 02 00 00
40: 40 10 03 00 00 00 00 00 00 0b a0 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00

00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 21
    Region 4: I/O ports at 3c60 [size=32]
    Capabilities: [80] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 38 30 05 00 10 02 81 00 03 0c 10 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 61 3c 00 00 00 00 00 00 00 00 00 00 06 11 38 30
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 02 00 00
40: 40 10 03 00 00 00 00 00 00 0b a0 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00

00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
    Subsystem: VIA Technologies, Inc. USB 2.0
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin C routed to IRQ 21
    Region 0: Memory at f2200000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [80] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 04 31 16 00 10 02 86 20 03 0c 10 40 80 00
10: 00 00 20 f2 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 04 31
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 03 00 00
40: 00 00 03 00 00 00 00 00 a8 20 00 09 00 00 00 00
50: 00 5a 00 80 00 00 00 00 04 0b 88 88 53 88 88 00
60: 20 20 01 00 00 00 00 00 01 00 00 00 00 00 08 c0
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 89 00 00 00 00 00 00 00 00 00

00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Capabilities: [c0] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 27 32 87 00 10 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
40: 44 80 f8 0b 00 00 10 00 8c 20 00 00 44 00 00 08
50: 00 ad 09 00 00 00 00 00 43 80 00 0b 00 00 00 00
60: 00 00 00 00 00 00 00 04 80 00 d0 fe 80 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00
80: 20 84 49 00 b2 30 00 00 01 05 00 00 00 18 00 00
90: 00 dd f8 88 a4 cc 00 00 00 c8 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 04 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 04 09 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 03 30 00 00 00 00 00 00 00 00

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin C routed to IRQ 22
    Region 0: I/O ports at 3400 [size=256]
    Capabilities: [c0] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 59 30 01 00 10 02 60 00 01 04 00 00 00 00
10: 01 34 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 03 00 00
40: 01 cc 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin C routed to IRQ 22
    Region 0: I/O ports at 3800 [size=256]
    Capabilities: [d0] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 68 30 01 00 10 02 80 00 80 07 00 00 00 00
10: 01 38 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 03 00 00
40: 01 cc 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Capabilities: [80] HyperTransport: Host or Secondary Interface
    	!!! Possibly incomplete decoding
    	Command: WarmRst+ DblEnd-
    	Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
    	Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
    	Revision ID: 1.02
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
60: 00 00 00 00 e4 00 00 00 1f cf 00 0f 7c 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00
90: 56 04 51 02 00 00 06 00 07 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 3f 00 00 00 00 00 01 00 00 00
50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 03 0a 00 00 00 0b 00 00
b0: 03 00 e0 00 00 2f f2 00 03 00 c0 00 00 ff df 00
c0: 13 10 00 00 00 30 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 03 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 00 00 00 01 10 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 ee e0 03 00 ee e0 03 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 04 00 00 00 00 00 00 00 45 35 82 13 21 0b 00 00
90: 00 8c 05 28 06 46 7b 06 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 86 19 f4 49 37 00 00 00 8a 88 8c 03 6c df 9b 20
c0: 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 4e 5b 77 83 2c 80 91 92 ff 93 e2 1a 86 bb e9 2e
e0: 00 4d 33 db ab 80 18 ca f5 03 16 18 85 9b b9 ad
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: ff 3b 00 00 40 00 00 02 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 16 16 00 80 99 2e b7
60: 67 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 11 01 02 51 11 80 00 50 00 38 00 08 1b 22 00 00
80: 00 07 07 23 13 21 13 00 00 00 00 00 00 00 00 00
90: 03 00 00 00 7a 00 00 00 00 08 3d 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 3f 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 07 a7 e2 04 10 27 40 20 00 00 00 00
e0: 00 00 00 00 20 06 45 0a 19 05 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

02:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce 7900 GS] (rev a1) (prog-if 00 [VGA controller])
    Subsystem: Unknown device 196e:0429
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 0
    Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=16M]
    Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
    Region 3: Memory at f1000000 (64-bit, non-prefetchable) [size=16M]
    Region 5: I/O ports at 1000 [size=128]
    Expansion ROM at f2000000 [disabled] [size=128K]
    Capabilities: [60] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
    	Address: 0000000000000000  Data: 0000
    Capabilities: [78] Express Endpoint IRQ 0
    	Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    	Device: Latency L0s <1us, L1 <4us
    	Device: AtnBtn- AtnInd- PwrInd-
    	Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
    	Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
    	Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
    	Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
    	Link: Latency L0s <1us, L1 <4us
    	Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch-
    	Link: Speed 2.5Gb/s, Width x16
00: de 10 92 02 07 00 10 00 a1 00 00 03 10 00 00 00
10: 00 00 00 f0 0c 00 00 d0 00 00 00 00 04 00 00 f1
20: 00 00 00 00 01 10 00 00 00 00 00 00 6e 19 29 04
30: 00 00 00 f2 60 00 00 00 00 00 00 00 00 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 00 01 00 00 05 00 00
80: 10 28 00 00 01 4d 01 00 08 00 01 11 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

05:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 19)
    Subsystem: ASUSTeK Computer Inc. Marvell 88E8053 Gigabit Ethernet controller PCIe (Asus)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 36
    Region 0: Memory at f2120000 (64-bit, non-prefetchable) [size=16K]
    Region 2: I/O ports at 2000 [size=256]
    Expansion ROM at f2100000 [disabled] [size=128K]
    Capabilities: [48] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=1 PME-
    Capabilities: [50] Vital Product Data
    Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
    	Address: 00000000fee0100c  Data: 41b9
    Capabilities: [e0] Express Legacy Endpoint IRQ 0
    	Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    	Device: Latency L0s unlimited, L1 unlimited
    	Device: AtnBtn- AtnInd- PwrInd-
    	Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
    	Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    	Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
    	Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 3
    	Link: Latency L0s <256ns, L1 unlimited
    	Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch-
    	Link: Speed 2.5Gb/s, Width x1
00: ab 11 62 43 07 00 10 00 19 00 00 02 10 00 00 00
10: 04 00 12 f2 00 00 00 00 01 20 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 42 81
30: 00 00 10 f2 48 00 00 00 00 00 00 00 00 01 00 00
40: 00 00 f0 01 00 80 a0 01 01 50 02 fe 00 20 00 13
50: 03 5c 00 80 00 00 00 01 00 00 00 01 05 e0 82 00
60: 0c 10 e0 fe 00 00 00 00 b9 41 00 00 00 00 00 00
70: 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 10 00 11 00 c0 0f 00 00 00 20 10 00 11 a4 03 03
f0: 08 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00

VGA and Asus a8v-e_se

[Patrick Georgi]

Am Montag, den 03.03.2008, 23:06 -0500 schrieb Jonathan Rogers:
> BTW, how are flash chip sizes detected? All of the images I've
> generated
> using coreboot or saved using flashrom on this board are 512KiB, but the
> manual indicates that it has 4MiB of flash. Is the manual lying? I'm

I guess that's 512 kilobytes vs. 4 megabits?
Memory chip sizes are usually specified in bits.

Patrick Georgi

VGA and Asus a8v-e_se

[Jonathan Rogers]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Patrick Georgi wrote:
> Am Montag, den 03.03.2008, 23:06 -0500 schrieb Jonathan Rogers:
> > BTW, how are flash chip sizes detected? All of the images I've
> > generated
> > using coreboot or saved using flashrom on this board are 512KiB, but the
> > manual indicates that it has 4MiB of flash. Is the manual lying? I'm
>
> I guess that's 512 kilobytes vs. 4 megabits?
> Memory chip sizes are usually specified in bits.

This is the exact text from the user manual PDF:

BIOS features 4 MB Flash ROM, Award BIOS, PnP, DMI2.0, WfM2.0,
                SM BIOS 2.3

So, does that mean 4 megabits? If so, that's even less than 512KiB
(524288 byte) images I've been writing, which are actually about 4.19
megabits.

Jonathan Rogers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFHzRVJMs6f82yVS5wRAq2pAKDeJj8tq7np6AF3e2TyYr2nH+E8cgCgnkZ0
K1ADvvxtwcU3Lgv8En4JaFA=
=p2HO
-----END PGP SIGNATURE-----

VGA and Asus a8v-e_se

[Rudolf Marek]

Hi,

The flash is only 512KB I bought 1MB part. I will tell in evening which 
and what needs to be done to get it work.
I need to work now.
Rudolf

VGA and Asus a8v-e_se

[Jonathan Rogers]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Rudolf Marek wrote:
> The flash is only 512KB I bought 1MB part. I will tell in evening which
> and what needs to be done to get it work.
> I need to work now.

Yeah, I was just curious about the apparent discrepancy; it's not a
priority for to me to fit more in there. I now realize that as
Carl-Daniel pointed out, when the manual says 4MB, it means the same as
512KiB. Thanks for the help.

Jonathan Rogers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFHzT52Ms6f82yVS5wRAhkhAJ4yIP+hIW1vSXb4E3UrQ6LNSiMl8gCgo1+d
p7NI4GU2YuOm6Ec0IzZRXvo=
=zamI
-----END PGP SIGNATURE-----

VGA and Asus a8v-e_se

[Rudolf Marek]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi,

I bought SST49LF080A (1MB) on http://bios-repair.co.uk for 5.74GBP incl shipping
to CZ. It does work, but minor modification to SB needs to be done. I will post
a patch some day...

Rudolf
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFHzcnC3J9wPJqZRNURAqPJAKCEFg1vvxxsGXBQ3I+eMSgc+VxAMwCePdtq
q6LcR6S5XxHdj2HerDA9mQY=
=K1/g
-----END PGP SIGNATURE-----

VGA and Asus a8v-e_se

[Carl-Daniel Hailfinger]

On 04.03.2008 10:24, Jonathan Rogers wrote:
> Patrick Georgi wrote:
> > Am Montag, den 03.03.2008, 23:06 -0500 schrieb Jonathan Rogers:
> > > BTW, how are flash chip sizes detected? All of the images I've
> > > generated
> > > using coreboot or saved using flashrom on this board are 512KiB,
>
> but the
> > > manual indicates that it has 4MiB of flash. Is the manual lying? I'm
> >
> > I guess that's 512 kilobytes vs. 4 megabits?
> > Memory chip sizes are usually specified in bits.
>
> This is the exact text from the user manual PDF:
>
> BIOS features 4 MB Flash ROM, Award BIOS, PnP, DMI2.0, WfM2.0,
>                 SM BIOS 2.3
>
> So, does that mean 4 megabits? If so, that's even less than 512KiB
> (524288 byte) images I've been writing, which are actually about 4.19
> megabits.

Think binary megabits. In that case, 4 megabits (which BIOS flash and 
mainboard vendors strangely write as "MB") is exactly 512 kiBytes.

Regards,
Carl-Daniel

VGA and Asus a8v-e_se

[Rudolf Marek]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
> Your instructions about both Powernow! and VGA BIOS were right on. I now
> have my Ubuntu system running with both video and frequency scaling
> after booting from coreboot. I have attached the output from "sudo lspci
> -vvvxxx" after making the above changes and booting coreboot.

Good. Please can you bit play with the peg_init?

I think you can ommit:

/* Disable scrambling bit 6 to 1. */
        pci_write_config8(dev, 0xc0, 0x43);

and this part:

/* Retrain link. */
        reg = pci_read_config8(dev, 0x50);
        pci_write_config8(dev, 0x50, reg | 0x20);

reg = pci_read_config8(dev, 0x3e);
        reg |= 0x40;            /* Bus reset. */
        pci_write_config8(dev, 0x3e, reg);

reg = pci_read_config8(dev, 0x3e);
        reg &= ~0x40;           /* Clear reset. */
        pci_write_config8(dev, 0x3e, reg);

Will it work afterwards?

Or you may try to change:
 pci_write_config8(dev, 0xe1, 0xb);

to:

pci_write_config8(dev, 0xe1, 0x4);

I have usually like 1 hour of free time every day (during late evening) so I
can't test too much but I can help like this.

Thanks,
Rudolf
> All of the regular PCI devices seem to be on bus 00, while the onboard
> PCIe network interface is on bus 05. The PCIe x16 card is on bus 02.
> Before I bypassed the peg_init function, all of the PCI devices except
> the Nvidia PCIe x16 video card seemed to work. When I ran lspci, it made
> no mention of any device on bus 02 or any vga or nvidia device; it did
> however see the network interface on bus 05. I neglected to save that
> output, but I can un-bypass peg_init and save the lspci output if it
> will be helpful.
>
> BTW, how are flash chip sizes detected? All of the images I've generated
> using coreboot or saved using flashrom on this board are 512KiB, but the
> manual indicates that it has 4MiB of flash. Is the manual lying? I'm
> curious because I'm wondering if it's possible to use a Linux payload
> with this board, but I realize that Filo or etherboot is probably
> sufficient as far as minimizing boot time. Thank you very much for your
> insight and tolerance of my limited knowledge.
>
> Jonathan Rogers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFHzckB3J9wPJqZRNURAimOAKDViCGcN4fSUATdU8CiqQhAIVOR0QCcCIqF
7+4IqpMUwYM5N3/i7JKg+Lg=
=MTzk
-----END PGP SIGNATURE-----

VGA and Asus a8v-e_se

[Jonathan Rogers]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Rudolf Marek wrote:
> > Your instructions about both Powernow! and VGA BIOS were right on. I now
> > have my Ubuntu system running with both video and frequency scaling
> > after booting from coreboot. I have attached the output from "sudo lspci
> > -vvvxxx" after making the above changes and booting coreboot.
>
> Good. Please can you bit play with the peg_init?
>
> I think you can ommit:
>    /* Disable scrambling bit 6 to 1. */
>     pci_write_config8(dev, 0xc0, 0x43);
>
> and this part:
>     /* Retrain link. */
>     reg = pci_read_config8(dev, 0x50);
>     pci_write_config8(dev, 0x50, reg | 0x20);
>
>     reg = pci_read_config8(dev, 0x3e);
>     reg |= 0x40;            /* Bus reset. */
>     pci_write_config8(dev, 0x3e, reg);
>
>     reg = pci_read_config8(dev, 0x3e);
>     reg &= ~0x40;           /* Clear reset. */
>     pci_write_config8(dev, 0x3e, reg);
>
> Will it work afterwards?

I made these changes and VGA initialization works!

One thing that I didn't notice the first few times I booted with
coreboot is that the CPU fan speed control that Asus calls Q-fan doesn't
seem to be working. When I boot using the legacy Asus BIOS, the CPU fan
audibly slows down a few seconds after starting. Whenever the CPU is
idle, the sensors command shows the CPU fan at about 1800 RPM. However,
 after booting coreboot, the fan stays at full blast. The sensors
command shows that the CPU fan is running at about 2500 RPM continuously.

I see that the Wiki page
URL:http://www.coreboot.org/ASUS_A8V-E_SE_Build_Tutorial says that
Sensors / fan control is "OK", but I'm not sure if that means that the
motherboard's fan speed controller should be working or not. I also
tried to set up fan speed control using the LM-sensors package. Here's
the output from "sudo pwmconfig":

- ----------------------------------------------------------------------
This program will search your sensors for pulse width modulation (pwm)
controls, and test each one to see if it controls a fan on
your motherboard. Note that many motherboards do not have pwm
circuitry installed, even if your sensor chip supports pwm.

We will attempt to briefly stop each fan using the pwm controls.
The program will attempt to restore each fan to full speed
after testing. However, it is ** very important ** that you
physically verify that the fans have been to full speed
after the program has completed.

Found the following devices:
   hwmon0/device is k8temp
   hwmon1/device is w83627ehf

Found the following PWM controls:
   hwmon1/device/pwm1
hwmon1/device/pwm1 stuck to 0
Failed to set hwmon1/device/pwm1 to full speed
Something's wrong, check your fans!
- ----------------------------------------------------------------------

Thank you very much for your time and help, especially in light of your
busy schedule. I hope my experiments can help you and others who want to
run coreboot on this board.

Jonathan Rogers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFHzmL0Ms6f82yVS5wRAmiXAJ0fvSHrlRr4XIGXjUhWejngkYG9CQCeL7GB
OJzGAEaB3z+Aez3Vh1z/6bI=
=/flJ
-----END PGP SIGNATURE-----

VGA and Asus a8v-e_se

[Rudolf Marek]

Hi,
> I made these changes and VGA initialization works!

OK I will try maybe today evening with my ATI card. I think we can leave it like 
that.
> One thing that I didn't notice the first few times I booted with
> coreboot is that the CPU fan speed control that Asus calls Q-fan doesn't
> seem to be working. When I boot using the legacy Asus BIOS, the CPU fan
> audibly slows down a few seconds after starting. Whenever the CPU is
> idle, the sensors command shows the CPU fan at about 1800 RPM. However,
>  after booting coreboot, the fan stays at full blast. The sensors
> command shows that the CPU fan is running at about 2500 RPM continuously.

Yes I know, maybe we should create some TODO plan on wiki page:

A8V-E SE Specific todo:

1) initialize fans to "thermal cruise mode"
2) reset somtimes does not work
3) LDT bus is set to 1000MHz and not checked for Semprons or other settings
4) Extend the flash decode so 1MB chips can be used

My global todo:

5) genpowenow - generatate automatically the APCI objects for powernow
6) S3 support
7) Dummy SMM routine
8) v3 port?
> Thank you very much for your time and help, especially in light of your
> busy schedule. I hope my experiments can help you and others who want to
> run coreboot on this board.

yes I'm glad that someone pick up this board - maybe you can jump in and try to 
program something too ;) I would suggest to start with 1, 3 or 4.

For the silent fan, you can use /sys/class/hwmon/... interfacce. Check the
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.24.y.git;a=blob;f...

Not all detailed parameters can be programmed by the driver, but all important 
yes. So you can use "echo " command to programm it. I think pwm2 is the CPU FAN 
header.

Here is a datasheet for a chip.
http://www.winbond.com/hq/enu/ProductAndSales/ProductLines/ComputerLogicIC/S...

Thanks,

Rudolf

VGA and Asus a8v-e_se

[Jonathan Rogers]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Rudolf Marek wrote:
> For the silent fan, you can use /sys/class/hwmon/... interfacce. Check the
> http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.24.y.git;a=blob;f...
>
> Not all detailed parameters can be programmed by the driver, but all
> important yes. So you can use "echo " command to programm it. I think
> pwm2 is the CPU FAN header.

Yes, I understand now. Thanks for the pointer. The source file doesn't
seem to say anything about setting pwm[1-4]_enable to 0. Does the
hardware simply not support that? When attempting to write "0" to
pwm[1-4]_enable, I get "write error: Invalid argument", which seems to
be what causes pwmconfig and fancontrol to fail mysteriously. I did
manage to get fancontrol to work by modifying pwmconfig and fancontrol
to ignore that error. Of course, they probably aren't needed if the
w83627ehf can control the fan speed itself.

I have submitted a bug report URL:http://lm-sensors.org/ticket/2305
about those scripts, but I'm not sure if it should be considered a bug
in the scripts or in the kernel. Since you're one of the original
authors of the w83627ehf module, I thought you might know. This issue
isn't very high priority, since I now know that either the legacy BIOS
or the Linux w83627ehf driver can enable fan speed control.

I may try to take a crack add adding it to coreboot too, since it
appears that you've already done most of the hard work. Thanks again!

Jonathan Rogers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFHz0Z8Ms6f82yVS5wRAuAGAJ9yKTREgGYmzyfKfgGfiBb28wBoogCeMAy2
3MyS6/GzAm/AveZNSnhQvBI=
=iXEP
-----END PGP SIGNATURE-----

VGA and Asus a8v-e_se

[Jonathan Rogers]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Rudolf Marek wrote:
> If possible could you send me the lspci -xxx when the coreboot is
> running too?

I have attached the output of "sudo lspci -vvvxxx" after booting
coreboot with the normal peg_init when the Nvidia PCIe x16 VGA card
wasn't working.

One thing that doesn't work currently is a soft reboot. When I reboot in
Linux I get the following on the serial console, then it the machine
just sits there. I then have to hit the reset button or cycle the power.

- ------------------------------------------------------------------
 * Will now restart
[  451.336818] Restarting system.

coreboot-2.0.0.0Fallback Mon Mar  3 20:19:29 EST 2008 starting...
now booting... fallback

coreboot-2.0.0.0Normal Mon Mar  3 20:19:00 EST 2008 starting...
now booting... real_main

INIT detected from  ---- {APICID = 00 NODEID = 00 COREID = 00} ---

Issuing SOFT_RESET...

coreboot-2.0.0.0Fallback Mon Mar  3 20:19:29 EST 2008 starting...
now booting... fallback

coreboot-2.0.0.0Normal Mon Mar  3 20:19:00 EST 2008 starting...
now booting... real_main
core0 started:
now booting... Core0 started
started ap apicid:
SBLink=00
NC node|link=00
- ------------------------------------------------------------------

Thanks

Jonathan Rogers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFHzNS1Ms6f82yVS5wRAoTMAJ9YmHVTUZN7BG6rFa9TJriJYZdB2ACgqvMz
uyWn0UhZg6Cv6GZTb7d7s14=
=3TWO
-----END PGP SIGNATURE-----

00:00.0 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
    Latency: 64
    Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
    Capabilities: [80] AGP version 3.5
    	Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
    	Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
    Capabilities: [50] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [60] HyperTransport: Slave or Primary Interface
    	!!! Possibly incomplete decoding
    	Command: BaseUnitID=0 UnitCnt=3 MastHost- DefDir-
    	Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
    	Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
    	Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
    	Link Config 1: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit
    	Revision ID: 1.02
    Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration
00: 06 11 38 02 06 00 30 22 00 00 00 06 00 40 80 00
10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: bf 63 08 00 00 00 00 00 01 00 1f c4 00 04 00 01
50: 01 60 02 00 00 00 00 00 08 00 01 80 03 80 17 00
60: 08 58 60 00 20 00 11 11 d0 00 00 00 22 06 75 00
70: 02 00 00 00 00 00 00 00 00 00 00 00 08 00 00 00
80: 02 50 35 00 07 02 00 1f 00 00 00 00 28 00 00 00
90: 80 00 00 00 00 0f 01 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 08 00 00 98 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:00.1 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
00: 06 11 38 12 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 81 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:00.2 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
00: 06 11 38 22 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 13 8e 0e 31 30 3c 80 86 7f cf 44 22 24 00 22 30
b0: 3f 13 00 00 02 00 00 00 00 00 00 00 00 00 00 00
c0: 20 aa aa 02 50 50 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:00.3 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
00: 06 11 38 32 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 22 22 00 00 00 00 e4 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: ff ff ff 30 00 40 39 00 40 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:00.4 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
00: 06 11 38 42 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 0e 00 00 00 00 00 00 00 00 00

00:00.5 PIC: VIA Technologies, Inc. K8T890 I/O APIC Interrupt Controller (prog-if 20 [IO(X)-APIC])
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
00: 06 11 38 52 06 00 00 00 00 20 00 08 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 8c 00 05 00 00 00 20 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 8b 0c 00 00 23 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 95 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:00.7 Host bridge: VIA Technologies, Inc. K8T890 Host Bridge
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
00: 06 11 38 72 06 00 00 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 64 3b 88 82 82 44 00 30 a3 39 88 80 82 44 00 00
50: 00 00 00 00 00 00 01 40 08 00 01 80 03 80 17 00
60: 00 ff ff f0 00 00 00 00 00 00 00 00 00 00 00 00
70: c2 c8 ee 01 24 0f 50 08 01 00 00 00 7f 00 10 12
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 06 01 00 e0 35 88 88 61 89 98 77 11 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 39 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fff00000-000fffff
    Prefetchable memory behind bridge: fff00000-000fffff
    Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    Capabilities: [70] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 88 b1 07 00 30 02 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 00 20 02
20: f0 ff 00 00 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 70 00 00 00 00 00 00 00 00 00 17 00
40: 91 40 00 44 31 3a 88 b1 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 0e 70 35 00 07 02 00 1f 00 00 00 00 28 00 00 00
90: 80 00 00 00 00 08 01 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: bf 63 08 00 00 00 00 00 00 00 1f c4 00 04 00 00
c0: 08 00 0b ff 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode])
    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fff00000-000fffff
    Prefetchable memory behind bridge: fff00000-000fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    	Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    	Device: Latency L0s <1us, L1 unlimited
    	Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    	Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    	Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    	Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
    	Link: Latency L0s <64ns, L1 <1us
    	Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
    	Link: Speed 2.5Gb/s, Width x16
    	Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
    	Slot: Number 0, PowerLimit 0.000000
    	Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
    	Slot: AttnInd Unknown, PwrInd Unknown, Power-
    	Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [68] Power Management version 2
    	Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable+
    	Address: 00000000fee0100c  Data: 4171
    	Masking: 00000001  Pending: 00000000
00: 06 11 38 a2 04 04 10 00 00 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 00 f0 00 00 00
20: f0 ff 00 00 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 01 03 00
40: 10 68 41 01 01 0f 00 00 0f 00 11 00 01 0d 00 00
50: 00 00 01 01 60 00 00 00 00 00 48 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00
70: 05 00 81 01 0c 10 e0 fe 00 00 00 00 71 41 00 00
80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 04 00 00 30 00 00 00 00 00 00 00 00 00 00 00
b0: 0c f0 40 80 00 00 03 00 01 00 00 00 00 00 00 00
c0: 43 00 01 00 44 44 44 44 44 44 44 44 00 00 00 00
d0: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 0c 0b 01 8a f8 00 00 00 01 82 f8 00 00 00 00 00
f0: 00 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00

00:03.0 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode])
    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fff00000-000fffff
    Prefetchable memory behind bridge: fff00000-000fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    	Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    	Device: Latency L0s <64ns, L1 unlimited
    	Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    	Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    	Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    	Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 1
    	Link: Latency L0s <64ns, L1 <1us
    	Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
    	Link: Speed 2.5Gb/s, Width x0
    	Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
    	Slot: Number 0, PowerLimit 0.000000
    	Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
    	Slot: AttnInd Unknown, PwrInd Unknown, Power-
    	Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [68] Power Management version 2
    	Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable+
    	Address: 00000000fee0100c  Data: 4179
    	Masking: 00000001  Pending: 00000000
00: 06 11 38 c2 04 04 10 00 00 00 04 06 00 00 81 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 f0 00 00 00
20: f0 ff 00 00 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 01 03 00
40: 10 68 41 01 01 0e 00 00 0f 00 10 00 41 0c 00 01
50: 00 00 01 00 60 00 00 00 00 00 48 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00
70: 05 00 81 01 0c 10 e0 fe 00 00 00 00 79 41 00 00
80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 04 00 00 10 00 00 00 00 00 00 00 00 00 00 00
b0: 3b f0 40 80 00 00 03 00 00 00 00 00 00 00 00 00
c0: 03 00 01 00 44 44 00 00 00 00 00 00 00 00 00 00
d0: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 0b 01 8a f8 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00

00:03.1 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode])
    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fff00000-000fffff
    Prefetchable memory behind bridge: fff00000-000fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    	Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    	Device: Latency L0s <64ns, L1 unlimited
    	Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    	Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    	Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    	Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
    	Link: Latency L0s <64ns, L1 <1us
    	Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
    	Link: Speed 2.5Gb/s, Width x0
    	Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
    	Slot: Number 0, PowerLimit 0.000000
    	Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
    	Slot: AttnInd Unknown, PwrInd Unknown, Power-
    	Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [68] Power Management version 2
    	Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable+
    	Address: 00000000fee0100c  Data: 4181
    	Masking: 00000001  Pending: 00000000
00: 06 11 38 d2 04 04 10 00 00 00 04 06 00 00 81 00
10: 00 00 00 00 00 00 00 00 00 04 04 00 f0 00 00 00
20: f0 ff 00 00 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 02 03 00
40: 10 68 41 01 01 0e 00 00 0f 00 10 00 11 0c 00 02
50: 00 00 01 00 60 00 00 00 00 00 48 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00
70: 05 00 81 01 0c 10 e0 fe 00 00 00 00 81 41 00 00
80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 04 00 00 10 00 00 00 00 00 00 00 00 00 00 00
b0: 3b f0 40 80 00 00 03 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00
d0: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 0b 00 02 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:03.2 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
    I/O behind bridge: 00001000-00001fff
    Memory behind bridge: d0000000-d00fffff
    Prefetchable memory behind bridge: fff00000-000fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    	Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    	Device: Latency L0s <512ns, L1 unlimited
    	Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    	Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    	Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    	Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
    	Link: Latency L0s <64ns, L1 <1us
    	Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
    	Link: Speed 2.5Gb/s, Width x1
    	Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
    	Slot: Number 0, PowerLimit 0.000000
    	Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
    	Slot: AttnInd Unknown, PwrInd Unknown, Power-
    	Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [68] Power Management version 2
    	Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable+
    	Address: 00000000fee0100c  Data: 4189
    	Masking: 00000001  Pending: 00000000
00: 06 11 38 e2 07 04 10 00 00 00 04 06 00 00 81 00
10: 00 00 00 00 00 00 00 00 00 05 05 00 10 10 00 00
20: 00 d0 00 d0 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 03 03 00
40: 10 68 41 01 c1 0e 00 00 0f 00 12 00 11 0c 00 03
50: 00 00 11 00 60 00 00 00 00 00 48 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00
70: 05 00 81 01 0c 10 e0 fe 00 00 00 00 89 41 00 00
80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 04 00 00 10 00 00 00 00 00 00 00 00 00 00 00
b0: 3b f0 40 80 00 00 03 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00
d0: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 0b 00 02 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:03.3 PCI bridge: VIA Technologies, Inc. K8T890 PCI to PCI Bridge Controller (prog-if 00 [Normal decode])
    Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fff00000-000fffff
    Prefetchable memory behind bridge: fff00000-000fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: [40] Express Root Port (Slot+) IRQ 0
    	Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    	Device: Latency L0s <64ns, L1 unlimited
    	Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    	Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    	Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    	Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4
    	Link: Latency L0s <64ns, L1 <1us
    	Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
    	Link: Speed 2.5Gb/s, Width x0
    	Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
    	Slot: Number 0, PowerLimit 0.000000
    	Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
    	Slot: AttnInd Unknown, PwrInd Unknown, Power-
    	Root: Correctable- Non-Fatal- Fatal- PME-
    Capabilities: [68] Power Management version 2
    	Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable+
    	Address: 00000000fee0100c  Data: 4191
    	Masking: 00000001  Pending: 00000000
00: 06 11 38 f2 04 04 10 00 00 00 04 06 00 00 81 00
10: 00 00 00 00 00 00 00 00 00 06 06 00 f0 00 00 00
20: f0 ff 00 00 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 04 03 00
40: 10 68 41 01 01 0e 00 00 0f 00 10 00 11 0c 00 04
50: 00 00 01 00 60 00 00 00 00 00 48 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 01 70 22 c8 00 00 00 00
70: 05 00 81 01 0c 10 e0 fe 00 00 00 00 91 41 00 00
80: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 04 00 00 10 00 00 00 00 00 00 00 00 00 00 00
b0: 3b f0 40 80 00 00 03 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00
d0: 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 0b 00 02 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    Subsystem: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64
    Interrupt: pin B routed to IRQ 20
    Region 0: I/O ports at 2ca0 [size=8]
    Region 1: I/O ports at 2cc0 [size=4]
    Region 2: I/O ports at 2cb0 [size=8]
    Region 3: I/O ports at 2cd0 [size=4]
    Region 4: I/O ports at 2c80 [size=16]
    Region 5: I/O ports at 2000 [size=256]
    Capabilities: [c0] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 49 31 05 00 90 02 80 8f 01 01 00 40 80 00
10: a1 2c 00 00 c1 2c 00 00 b1 2c 00 00 d1 2c 00 00
20: 81 2c 00 00 01 20 00 00 00 00 00 00 06 11 49 31
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 02 00 00
40: 23 03 f1 44 0e af 00 00 00 82 65 03 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 10 10 00 05 00 20 00
60: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 01 00 01 00 10 00 00 00
80: 00 00 00 00 00 00 00 00 00 a0 f7 3c 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 80 02 49 31 06 11 49 31 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64
    Interrupt: pin A routed to IRQ 20
    Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
    Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
    Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
    Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
    Region 4: I/O ports at 2c90 [size=16]
    Capabilities: [c0] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 71 05 85 00 90 02 06 8a 01 01 00 40 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 91 2c 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 01 00 00
40: 2f f2 09 05 18 8c c0 00 a8 a8 a8 20 ff 00 b6 20
50: f0 ff ff e6 0c 00 00 00 a8 a8 a8 a8 00 00 00 00
60: 00 02 00 00 00 00 00 00 00 02 00 00 00 00 00 00
70: 02 01 00 00 00 00 00 00 82 01 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 06 00 71 05 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 09 00 00 00 00 00 00 00 00 00

00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 21
    Region 4: I/O ports at 2c00 [size=32]
    Capabilities: [80] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 38 30 05 00 10 02 81 00 03 0c 10 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 2c 00 00 00 00 00 00 00 00 00 00 06 11 38 30
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 01 00 00
40: 40 10 03 00 00 00 00 00 00 0b a0 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00

00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 21
    Region 4: I/O ports at 2c20 [size=32]
    Capabilities: [80] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 38 30 05 00 10 02 81 00 03 0c 10 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 21 2c 00 00 00 00 00 00 00 00 00 00 06 11 38 30
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 01 00 00
40: 40 10 03 00 00 00 00 00 00 0b a0 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00

00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 21
    Region 4: I/O ports at 2c40 [size=32]
    Capabilities: [80] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 38 30 05 00 10 02 81 00 03 0c 10 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 41 2c 00 00 00 00 00 00 00 00 00 00 06 11 38 30
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 02 00 00
40: 40 10 03 00 00 00 00 00 00 0b a0 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00

00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin B routed to IRQ 21
    Region 4: I/O ports at 2c60 [size=32]
    Capabilities: [80] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 38 30 05 00 10 02 81 00 03 0c 10 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 61 2c 00 00 00 00 00 00 00 00 00 00 06 11 38 30
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 02 00 00
40: 40 10 03 00 00 00 00 00 00 0b a0 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00

00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
    Subsystem: VIA Technologies, Inc. USB 2.0
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64, Cache Line Size: 64 bytes
    Interrupt: pin C routed to IRQ 21
    Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [80] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 04 31 16 00 10 02 86 20 03 0c 10 40 80 00
10: 00 00 10 d0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 04 31
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 03 00 00
40: 00 00 03 00 00 00 00 00 a8 20 00 09 00 00 00 00
50: 00 5a 00 80 00 00 00 00 04 0b 88 88 53 88 88 00
60: 20 20 01 00 00 00 00 00 01 00 00 00 00 00 08 c0
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 c2 ff 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 89 00 00 00 00 00 00 00 00 00

00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Capabilities: [c0] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 27 32 87 00 10 02 00 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
40: 44 80 f8 0b 00 00 10 00 8c 20 00 00 44 00 00 08
50: 00 ad 09 00 00 00 00 00 43 80 00 0b 00 00 00 00
60: 00 00 00 00 00 00 00 04 80 00 d0 fe 80 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00
80: 20 84 49 00 b2 30 00 00 01 05 00 00 00 18 00 00
90: 00 df f8 88 a4 cc 00 00 00 f9 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 04 01 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 04 09 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 03 30 00 00 00 00 00 00 00 00

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin C routed to IRQ 22
    Region 0: I/O ports at 2400 [size=256]
    Capabilities: [c0] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 59 30 01 00 10 02 60 00 01 04 00 00 00 00
10: 01 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 03 00 00
40: 01 cc 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin C routed to IRQ 22
    Region 0: I/O ports at 2800 [size=256]
    Capabilities: [d0] Power Management version 2
    	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    	Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 06 11 68 30 01 00 10 02 80 00 80 07 00 00 00 00
10: 01 28 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 03 00 00
40: 01 cc 00 00 c0 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Capabilities: [80] HyperTransport: Host or Secondary Interface
    	!!! Possibly incomplete decoding
    	Command: WarmRst+ DblEnd-
    	Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
    	Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
    	Revision ID: 1.02
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
60: 00 00 00 00 e4 00 00 00 1f cf 00 0f 7c 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00
90: 56 04 51 02 00 00 06 00 07 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 3f 00 00 00 00 00 01 00 00 00
50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 03 00 c0 00 00 1f d0 00 03 00 e0 00 00 ff ef 00
c0: 03 10 00 00 00 20 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 03 00 00 06 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 00 00 00 01 10 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 ee e0 03 00 ee e0 03 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 04 00 00 00 00 00 00 00 45 35 82 13 21 0b 00 00
90: 00 8c 05 28 06 46 7b 06 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 4c 2a 1a d1 d6 00 00 00 8a 88 ad 03 fc df 9f 20
c0: 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 6a 7b 77 93 24 80 01 92 bf 9b e2 9a 86 fb e9 2e
e0: 00 5d 37 9b a3 8a 10 c8 f5 03 92 5c 85 9b b9 ad
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: ff 3b 00 00 40 00 00 02 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 16 16 00 80 e8 27 a7
60: 77 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 11 01 02 51 11 80 00 50 00 38 00 08 1b 22 00 00
80: 00 07 07 23 13 21 13 00 00 00 00 00 00 00 00 00
90: 03 00 00 00 78 00 00 00 00 08 3d 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 3f 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 07 a7 e2 04 10 27 40 20 00 00 00 00
e0: 00 00 00 00 20 06 40 0a 19 05 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

05:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 19)
    Subsystem: ASUSTeK Computer Inc. Marvell 88E8053 Gigabit Ethernet controller PCIe (Asus)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 36
    Region 0: Memory at d0020000 (64-bit, non-prefetchable) [size=16K]
    Region 2: I/O ports at 1000 [size=256]
    Expansion ROM at d0000000 [disabled] [size=128K]
    Capabilities: [48] Power Management version 2
    	Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    	Status: D0 PME-Enable- DSel=0 DScale=1 PME-
    Capabilities: [50] Vital Product Data
    Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
    	Address: 00000000fee0100c  Data: 41b1
    Capabilities: [e0] Express Legacy Endpoint IRQ 0
    	Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    	Device: Latency L0s unlimited, L1 unlimited
    	Device: AtnBtn- AtnInd- PwrInd-
    	Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
    	Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    	Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
    	Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 3
    	Link: Latency L0s <256ns, L1 unlimited
    	Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch-
    	Link: Speed 2.5Gb/s, Width x1
00: ab 11 62 43 07 00 10 00 19 00 00 02 10 00 00 00
10: 04 00 02 d0 00 00 00 00 01 10 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 42 81
30: 00 00 00 d0 48 00 00 00 00 00 00 00 00 01 00 00
40: 00 00 f0 01 00 80 a0 01 01 50 02 fe 00 20 00 13
50: 03 5c 00 80 00 00 00 01 00 00 00 01 05 e0 82 00
60: 0c 10 e0 fe 00 00 00 00 b1 41 00 00 00 00 00 00
70: 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 10 00 11 00 c0 0f 00 00 00 20 11 00 11 a4 03 03
f0: 08 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00

VGA and Asus a8v-e_se

[Rudolf Marek]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
> coreboot-2.0.0.0Normal Mon Mar  3 20:19:00 EST 2008 starting...
> now booting... real_main
> core0 started:
> now booting... Core0 started
> started ap apicid:
> SBLink=00
> NC node|link=00

Hmm yes it happened to me too but only very few times. Maybe you can put some
debug messages bellow the cache_as_ram_auto.c:

ht_setup_chains_x(sysinfo);     // it will init sblnk and sbbusn, nodes, sbdn

function, I think it might freeze in k8t890_early_setup_car.

Thanks,
Rudolf
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFHzcsw3J9wPJqZRNURAtCjAKDHSvyE6iCZIBDcH9zVTXfk+x9A0gCdFiSw
pAHIuX/4uQ5TaN3+8BwJXbs=
=EWmV
-----END PGP SIGNATURE-----