Re: [coreboot] BDX-DE PCI init fail

[Zoran Stojsavljevic]

Hilbert,

David is right. GRUB2 should be also Legacy installable. I am simply
forgetting stuff, since I am not in BSP domain anymore, these days.

Today early morning I started my Fedora 27, and it failed to enter grub.cfg
for unknown reason (file was wiped out for some reason?!). It is, after
all, an easy fix, I estimated 10 minutes for that, but it took me
(amazingly) an hour to recover grub.cfg. It is matter of practice... It is.
;-)

Zoran
_______

On Tue, Jan 16, 2018 at 6:14 AM, David Hendricks 
wrote:
> Hi Hilbert,
>
> On Mon, Jan 15, 2018 at 12:51 AM, Hilbert Tu(杜睿哲_Pegatron) <
> [e-mail]> wrote:
> > Hi Zoran,
> >
> > That information was dumped when I use SeaBIOS as coreboot's payload. I
> > don't know why it is related to GRUB_legacy. If I use GRUB2 as payload, it
> > just hangs there. I am still struggling on this :(
>
> If you are using serial console, did you remember to enable serial output
> in grub.cfg? There is a GRUB2 wiki page on coreboot.org which you might
> find helpful (if you haven't already read it):
> https://www.coreboot.org/GRUB2
>
> By the way, I saw following message in the log. Should I choose
> > NodeManager Mode? Do you know what's different?
> > > > [SPS] SiliconEnabling Mode
> >
> > Thanks.
> > -Hilbert
> >
> > -----Original Message-----
> > From: Zoran Stojsavljevic [mailto:[e-mail]]
> > Sent: Thursday, January 11, 2018 7:27 PM
> > To: Hilbert Tu(杜睿哲_Pegatron)
> > Cc: Zeh, Werner; [e-mail]; David Hendricks
> > Subject: Re: [coreboot] BDX-DE PCI init fail
> > > Booting from Hard Disk...
> > > Booting from 0000:7c00
> >
> > It is booting from the thirty second Kbyte of HDD (sector 62, sector 0
> > is MBR), where the beginning of GRUB Legacy is placed/implanted,
> > called core.img or similar name.
> >
> > https://wiki.archlinux.org/index.php/GRUB_Legacy
> >
> > Well, you have succeed, by all means. Problem solved! ;-)
> >
> > Zoran
> > _______
> >
> > On Thu, Jan 11, 2018 at 12:06 PM, Hilbert Tu(杜睿哲_Pegatron)
> >  wrote:
> > > Hi Werner,
> > >
> > > Thanks for your information. It works but still has same result. The
> >
> > result is like following. My usb stick is ext4fs formatted and has kernel
> > and rootfs files. I wish SeaBIOS can give me a shell like Grub so that I
> > can specify how to boot next. Or should I create a bootable usb stick?
> > > ============= PEIM FSP is Completed =============
> > >
> > > Returned from FspNotify(EnumInitPhaseReadyToBoot)
> > > Jumping to boot code at 000ff06e(7eff6000)
> > > CPU0: stack: 00128000 - 00129000, lowest used address 00128b00, stack
> >
> > used: 1280 bytes
> > > entry    = 0x000ff06e
> > > lb_start = 0x00100000
> > > lb_size  = 0x0012d6d0
> > > buffer   = 0x7ed66000
> > > SeaBIOS (version rel-1.10.2-0-g5f4c7b1)
> > > BUILD: gcc: (coreboot toolchain v1.44 March 3rd, 2017) 6.3.0 binutils:
> >
> > (GNU Binutils) 2.28
> > > Found mainboard Intel Camelback Mountain CRB
> > > Relocating init from 0x000e3860 to 0x7ef74cc0 (size 49824)
> > > Found CBFS header at 0xffe00138
> > > multiboot: eax=0, ebx=0
> > > Found 25 PCI devices (max PCI bus is 05)
> > > Copying SMBIOS entry point from 0x7efc1000 to 0x000f7140
> > > Copying ACPI RSDP from 0x7efd2000 to 0x000f7110
> > > Using pmtimer, ioport 0x408
> > > WARNING - Timeout at tis_wait_sts:160!
> > > WARNING - Timeout at tis_wait_sts:160!
> > > Scan for VGA option rom
> > > XHCI init on dev 00:14.0: regs @ 0xfea00000, 21 ports, 32 slots, 32
> >
> > byte contexts
> > > XHCI    protocol USB  2.00, 8 ports (offset 1), def 3001
> > > XHCI    protocol USB  3.00, 6 ports (offset 16), def 1000
> > > XHCI    extcap 0xc1 @ 0xfea08040
> > > XHCI    extcap 0xc0 @ 0xfea08070
> > > XHCI    extcap 0x1 @ 0xfea0846c
> > > EHCI init on dev 00:1a.0 (regs=0xfea18020)
> > > EHCI init on dev 00:1d.0 (regs=0xfea19020)
> > > WARNING - Timeout at i8042_flush:71!
> > > ebda moved from 9f000 to 9e800
> > > AHCI controller at 00:1f.2, iobase 0xfea17000, irq 5
> > > Found 0 lpt ports
> > > Found 2 serial ports
> > > XHCI no devices found
> > > Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/storage@1/*@0/*@0,0
> > > Searching bootorder for: /pci@i0cf8/usb@1d/hub@1/usb-*@1
> > > USB MSC vendor='Generic-' product='Multiple Reader' rev='1.11' type=0
> >
> > removable=1
> > > ehci_wait_td error - status=80e42
> > > Initialized USB HUB (0 ports used)
> > > USB MSC blksize=512 sectors=30777344
> > > Initialized USB HUB (1 ports used)
> > > All threads complete.
> > > Scan for option roms
> > > Running option rom at c000:0003
> > > Running option rom at c100:0003
> > > Searching bootorder for: /pci@i0cf8/pci-bridge@2,2/*@0
> > > Searching bootorder for: /pci@i0cf8/pci-bridge@2,2/*@0,1
> > >
> > > Press ESC for boot menu.
> > >
> > > WARNING - Timeout at tis_wait_sts:160!
> > > Searching bootorder for: HALT
> > > drive 0x000f70c0: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=30777344
> > > Space available for UMB: c2000-efb00, f6960-f70c0
> > > Returned 184320 bytes of ZoneHigh
> > > e820 map has 9 items:
> > >   0: 0000000000000000 - 000000000009e800 = 1 RAM
> > >   1: 000000000009e800 - 00000000000a0000 = 2 RESERVED
> > >   2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
> > >   3: 0000000000100000 - 000000007efae000 = 1 RAM
> > >   4: 000000007efae000 - 0000000090000000 = 2 RESERVED
> > >   5: 00000000feb00000 - 00000000feb10000 = 2 RESERVED
> > >   6: 00000000feb80000 - 00000000fef00000 = 2 RESERVED
> > >   7: 00000000ff000000 - 0000000100000000 = 2 RESERVED
> > >   8: 0000000100000000 - 0000000280000000 = 1 RAM
> > > enter handle_19:
> > >   NULL
> > > Booting from Hard Disk...
> > > Booting from 0000:7c00
> > >
> > > -Hilbert
> > >
> > > This e-mail and its attachment may contain information that is
> >
> > confidential or privileged, and are solely for the use of the individual to
> > whom this e-mail is addressed. If you are not the intended recipient or
> > have received it accidentally, please immediately notify the sender by
> > reply e-mail and destroy all copies of this email and its attachment.
> > Please be advised that any unauthorized use, disclosure, distribution or
> > copying of this email or its attachment is strictly prohibited.
> > > 本電子郵件及其附件可能含有機密或依法受特殊管制之資訊，僅供本電子郵件之受文者使用。台端如非本電子郵件之受文者或誤收本電子
> >
> > 郵件，請立即回覆郵件通知寄件人，並銷毀本電子郵件之所有複本及附件。任何未經授權而使用、揭露、散佈或複製本電子郵件或其附件之行為，皆嚴格禁止。