[commit] r5974 - trunk/src/mainboard/msi/ms7135

[repository service]

Author: jakllsch
Date: Tue Oct 19 17:17:18 2010
New Revision: 5974
URL: https://tracker.coreboot.org/trac/coreboot/changeset/5974

Log:
Use the correct (W83627THF, not W83627HF) superio code in MS-7135 romstage.
This is consistent with the device tree and the chip actually on the board.
Trivial.

Signed-off-by: Jonathan Kollasch 
Acked-by: Jonathan Kollasch

Modified:
   trunk/src/mainboard/msi/ms7135/romstage.c

Modified: trunk/src/mainboard/msi/ms7135/romstage.c
==============================================================================
--- trunk/src/mainboard/msi/ms7135/romstage.c	Tue Oct 19 16:02:10 2010	(r5973)
+++ trunk/src/mainboard/msi/ms7135/romstage.c	Tue Oct 19 17:17:18 2010	(r5974)
@@ -22,7 +22,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  */

-#define SERIAL_DEV PNP_DEV(0x4e, W83627HF_SP1)
+#define SERIAL_DEV PNP_DEV(0x4e, W83627THF_SP1)

/* Used by raminit. */
 #define QRANK_DIMM_SUPPORT 1
@@ -41,7 +41,7 @@
 #include <pc80/mc146818rtc.h>
 #include "cpu/x86/lapic/boot_cpu.c"
 #include "northbridge/amd/amdk8/reset_test.c"
-#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
+#include "superio/winbond/w83627thf/w83627thf_early_serial.c"

#include <cpu/amd/model_fxx_rev.h>
 #include <console/console.h>
@@ -135,7 +135,7 @@
    	bsp_apicid = init_cpus(cpu_init_detectedx);
    }

-	w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+	w83627thf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
    uart_init();
    console_init();