Hi,
Is the SST49lf04 an "A" or "B"? [Viswesh] Actually I have both.When I tried with SST49LF004B, the above error is seen.
When I later tried with 4A, it was able to detect it, but the erasing failed as I suppose the Write Lock has been enabled.The read was successful.
Is this the flash device that came with the mainboard?
[Viswesh] No, These are new ones which we are trying on the iwill board.
If not, what flash device did the board come with from the factory?
[Viswesh] Need to remove the label and check,not sure right now.
Are you running flashrom with the factory BIOS?
[Viswesh]No.The board came up with the factory bios and then we removed it and then put our new SST flash and trying out.
I'm trying to get some feedback here to see about adding some debug and/or flash enables to flashrom and debug ideas to the flashrom wiki.
----- Original Message ---- From: bari bari@onelabs.com To: Viswesh S viswesh_vichu@yahoo.com Cc: coreboot@coreboot.org Sent: Thursday, April 10, 2008 5:36:03 AM Subject: Re: [coreboot] Flashrom error:iwill board:SST49LF004A/B
Viswesh S wrote:
Hi,
I am trying to flash Linux bios into my iwill dk8_htx board.
My bios flash is SST49Lf004A/B.
I am getting the following error.
ERROR: %s: W83627HF: *Wrong ID*:0xFF.
Is the SST 49lf004B supported by flashrom?When I checked the coreboot site,I could see "?" in the respective column.
I get the above error when I read or write the bios.
Is the SST49lf04 an "A" or "B"?
Is this the flash device that came with the mainboard?
If not, what flash device did the board come with from the factory?
Are you running flashrom with the factory BIOS?
I'm trying to get some feedback here to see about adding some debug and/or flash enables to flashrom and debug ideas to the flashrom wiki.
-Bari
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Hi,
have you already tried the patch I sent in my other mail to you and to the list?
Regards, Carl-Daniel
Hi Visvewsh,
On 10.04.2008 15:42, Carl-Daniel Hailfinger wrote:
have you already tried the patch I sent in my other mail to you and to the list?
please post the output of flashrom with my Winbond patch. Do I have to resend it?
Peter: This is one of the pending flashrom patches.
Regards, Carl-Daniel