[v2] r4259 - in trunk/coreboot-v2/src/mainboard: rca/rm4100 thomson/ip1000

Author: linux_junkie
Date: 2009-05-08 02:24:24 +0200 (Fri, 08 May 2009)
New Revision: 4259

Modified:
   trunk/coreboot-v2/src/mainboard/rca/rm4100/Config.lb
   trunk/coreboot-v2/src/mainboard/thomson/ip1000/Config.lb
Log:
Set up PIRQs in mainboard Config.lb for IP1000 and RM4100 instead of using the ones in i82801xx_lpc.c.
Signed-off-by: Joseph Smith 
Acked-by: Myles Watson

Modified: trunk/coreboot-v2/src/mainboard/rca/rm4100/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/rca/rm4100/Config.lb	2009-05-08 00:19:13 UTC (rev 4258)
+++ trunk/coreboot-v2/src/mainboard/rca/rm4100/Config.lb	2009-05-08 00:24:24 UTC (rev 4259)
@@ -80,6 +80,15 @@
       register "rom_address" = "0xfff00000"
     end
     chip southbridge/intel/i82801xx	# Southbridge
+      register "pirqa_routing" = "0x07"
+      register "pirqb_routing" = "0x09"
+      register "pirqc_routing" = "0x0a"
+      register "pirqd_routing" = "0x09"
+      register "pirqe_routing" = "0x05"
+      register "pirqf_routing" = "0x80"
+      register "pirqg_routing" = "0x80"
+      register "pirqh_routing" = "0x0b"
+
       device pci 1d.0 on end		# USB UHCI Controller #1
       device pci 1d.1 on end		# USB UHCI Controller #2
       device pci 1d.2 on end		# USB UHCI Controller #3

Modified: trunk/coreboot-v2/src/mainboard/thomson/ip1000/Config.lb
===================================================================
--- trunk/coreboot-v2/src/mainboard/thomson/ip1000/Config.lb	2009-05-08 00:19:13 UTC (rev 4258)
+++ trunk/coreboot-v2/src/mainboard/thomson/ip1000/Config.lb	2009-05-08 00:24:24 UTC (rev 4259)
@@ -80,6 +80,15 @@
       register "rom_address" = "0xfff00000"
     end
     chip southbridge/intel/i82801xx	# Southbridge
+      register "pirqa_routing" = "0x07"
+      register "pirqb_routing" = "0x09"
+      register "pirqc_routing" = "0x0a"
+      register "pirqd_routing" = "0x09"
+      register "pirqe_routing" = "0x05"
+      register "pirqf_routing" = "0x80"
+      register "pirqg_routing" = "0x80"
+      register "pirqh_routing" = "0x0b"
+
       device pci 1d.0 on end		# USB UHCI Controller #1
       device pci 1d.1 on end		# USB UHCI Controller #2
       device pci 1d.2 on end		# USB UHCI Controller #3