[PATCH] artecgroup/dbe61: Sync irq_tables with dbe62 code to fix compilation and have a chance of working properly.

[Mart Raudsepp]

Hello,

Here's a patch that fixes DBE61 target compilation by making irq_tables.h
take the v3 approach. It might actually work on hardware regarding
interrupt setup, but we need to get the raminit to work properly to see...
so this is in the name of compilation fix and common sense that as all the
IRQ routing is the same in DBE61 and DBE62, that the routing settings in
dbe62 code should be fine for dbe61 as well.
Compilable target makes poking at raminit easier ;)

Regards,
Mart Raudsepp
Artec Design LLC

[Carl-Daniel Hailfinger]

Hi,

On 07.05.2008 23:28, Mart Raudsepp wrote:
> Here's a patch that fixes DBE61 target compilation by making irq_tables.h
> take the v3 approach. It might actually work on hardware regarding
> interrupt setup, but we need to get the raminit to work properly to see...
> so this is in the name of compilation fix and common sense that as all the
> IRQ routing is the same in DBE61 and DBE62, that the routing settings in
> dbe62 code should be fine for dbe61 as well.

Well, if the IRQ routing is the same in DBE61 and DBE62, why do the
tables differ after your patch?

Regards,
Carl-Daniel