Re: S2880

[YhLu]

Ron,

It seems I can not enable XIP_ROM_SIZE and XIP_ROM_BASE. Even I have set
them in Options.lb

Regards

Yinghai Lu

-----邮件原件-----
发件人: YhLu 
发送时间: 2003年8月6日 15:17
收件人: YhLu; [e-mail]; ron minnich
抄送: Stefan Reinauer; [e-mail]
主题: Re: S2880

Ron,

After swap _ROMBASE etc to after ROM_SECTION_SIZE and ROM_SECTION_OFFSET.  I
can switch to the normal mode.

But in fallback mode and normal mode ( after reboot) still got problem.

~ # cmos_util -d
# The CMOS Definition table was not found in ram
# CMOS definition table was not found in RAM memory
# Looking for definitions in cmos.layout file
Can not open config file cmos.layout

Regards

Yinghai Lu

-----邮件原件-----
发件人: YhLu 
发送时间: 2003年8月6日 11:18
收件人: '[e-mail]'; ron minnich
抄送: Stefan Reinauer; [e-mail]
主题: S2880

Eric,

It seems the image that built with can not switch to Normal booting.

1. In Fallback mode, after power on I can use cmos_util.
2. after rebooting it is still in Fallback mode,and can not cmos_util, it
said can not find option table in the ram. And can not access cmos.layout.

When I using old tool, I can switch to normal mode, but need to change
boot_option and last_boot from fallback to normal.

regards

Yinghai Lu

S2880

[ron minnich]

I will try to email you my latest tree, Stefan put them in last night.

ron