[LinuxBIOS] [PATCH] tyan s2891: assume 1MB rom chip for onboard VGA rom detection

[LinuxBIOS] [PATCH] tyan s2891: assume 1MB rom chip for onboard VGA rom detection

[Uwe Hermann]

On Tue, Sep 18, 2007 at 04:40:13PM -0400, Ward Vandewege wrote:
> The s2891 ships with a 1MB rom chip. The src/mainboard/tyan/s2891/Config.lb file assumes a 1MB rom chip.
>
> The default position for the VGA bios should also assume a 1MB rom chip by default, instead of a 512KB chip.
>
> Signed-off-by: Ward Vandewege
> Index: src/mainboard/tyan/s2891/Config.lb
>
> --- src/mainboard/tyan/s2891/Config.lb      (revision 2780)
> +++ src/mainboard/tyan/s2891/Config.lb      (working copy)
> @@ -314,8 +314,8 @@
>                                         #       chip drivers/ati/ragexl
>                                                  chip drivers/pci/onboard
>                                                          device pci 7.0 on end
>                                                    register "rom_address" = "0xfff80000" #for 512K
>                                   #               register "rom_address" = "0xfff00000" #for 1M
>                                                    #register "rom_address" = "0xfff80000" #for 512K
>                                                    register "rom_address" = "0xfff00000" #for 1M
>                                            end
>                                   end
>                                   device pci a.0 off end # NIC

Acked-by: Uwe Hermann

Uwe.

[LinuxBIOS] [PATCH] tyan s2891: assume 1MB rom chip for onboard VGA rom detection

[Ward Vandewege]

On Wed, Sep 19, 2007 at 06:49:09PM +0200, Uwe Hermann wrote:
> On Tue, Sep 18, 2007 at 04:40:13PM -0400, Ward Vandewege wrote:
> > The s2891 ships with a 1MB rom chip. The src/mainboard/tyan/s2891/Config.lb file assumes a 1MB rom chip.
> >
> > The default position for the VGA bios should also assume a 1MB rom chip by default, instead of a 512KB chip.
> >
> > Signed-off-by: Ward Vandewege
> > Index: src/mainboard/tyan/s2891/Config.lb
> >
> > --- src/mainboard/tyan/s2891/Config.lb      (revision 2780)
> > +++ src/mainboard/tyan/s2891/Config.lb      (working copy)
> > @@ -314,8 +314,8 @@
> >                                         #       chip drivers/ati/ragexl
> >                                                  chip drivers/pci/onboard
> >                                                          device pci 7.0 on end
> >                                                    register "rom_address" = "0xfff80000" #for 512K
> >                                   #               register "rom_address" = "0xfff00000" #for 1M
> >                                                    #register "rom_address" = "0xfff80000" #for 512K
> >                                                    register "rom_address" = "0xfff00000" #for 1M
> >                                            end
> >                                   end
> >                                   device pci a.0 off end # NIC
>
> Acked-by: Uwe Hermann

r2792

Thanks,
Ward.