I am trying to build Coreboot for the X201, and to improve the Coreboot wiki's X201 page as I go along.
I am presently following the instructions at this permalink: https://www.coreboot.org/index.php?title=Board:lenovo/x201&oldid=24764#M...
(I decided to skip the step to neuter the ME: https://www.coreboot.org/index.php?title=Board:lenovo/x201&oldid=24764#N... . Maybe I will try neutering the X201's ME another day, but first of all I would like to at least achieve Coreboot running on the X201.)
Everything went fine, so far, until this step: https://www.coreboot.org/index.php?title=Board:lenovo/x201&oldid=24764#C...
Let me describe how I attempted to implement that step.
I ran `make distclean`.
I ran `make nconfig`, and selected:
- "Lenovo" under Mainboard > Mainboard vendor
- "ThinkPad X201 / X201s / X201t" under Mainboard > Mainboard model
- "Add Intel descriptor.bin file" under Chipset
- "Add Intel ME/TXE firmware" under Chipset
Then I pressed F9 ("Exit") and saved the config to the default location ( coreboot/.config ).
Then I ran `make`, which seemed to be going fine until the following output:
Compile IFDTOOL HOSTCC util/ifdfake/ifdfake DD Adding Intel Firmware Descriptor src/southbridge/intel/common/firmware/Makefile.inc:50: recipe for target 'add_intel_firmware' failed make: *** [add_intel_firmware] Error 1
Can anyone suggest how to overcome this error?
I have attached the .config generated by `make nconfig`, and the full output of `make`, in case that is useful.
Many thanks!
-
Sam Kuper