[commit] r5255 - in trunk/src: arch/i386/lib mainboard/amd/mahogany_fam10 mainboard/amd/serengeti_cheetah mainboard/amd/serengeti_cheetah_fam10 mainboard/asus/a8n_e mainboard/gigabyte/ga_2761gxdk m...
Author: oxygene Date: Wed Mar 17 23:44:39 2010 New Revision: 5255 URL: https://tracker.coreboot.org/trac/coreboot/changeset/5255
Log: Remove failover/fallback/normal handling in mainboards' romstage.c. That's newconfig stuff.
1. In failover_process(), I removed the fallback/normal selection logic and kept the remaining hardware init in. The if-clauses' conditions are reverted to match. Remove #if failover||fallback guard.
2. Change cache_as_ram_main() to first call failover_process, then real_main unconditionally.
3. Move failover_process's code to the beginning of real_main, remove failover_process and its call in cache_as_ram_main.
4. Remove cache_as_ram_main, rename real_main to cache_as_ram_main (same arguments, so no problem with that)
Signed-off-by: Patrick Georgi patrick.georgi@coresystems.de Acked-by: Stefan Reinauer stepan@coresystems.de
Deleted: trunk/src/arch/i386/lib/failover_failover.lds trunk/src/mainboard/tyan/s2895/failover.c Modified: trunk/src/mainboard/amd/mahogany_fam10/romstage.c trunk/src/mainboard/amd/serengeti_cheetah/romstage.c trunk/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c trunk/src/mainboard/asus/a8n_e/romstage.c trunk/src/mainboard/gigabyte/ga_2761gxdk/romstage.c trunk/src/mainboard/gigabyte/m57sli/romstage.c trunk/src/mainboard/hp/dl145_g3/romstage.c trunk/src/mainboard/iwill/dk8_htx/romstage.c trunk/src/mainboard/iwill/dk8s2/romstage.c trunk/src/mainboard/iwill/dk8x/romstage.c trunk/src/mainboard/msi/ms7135/romstage.c trunk/src/mainboard/msi/ms7260/romstage.c trunk/src/mainboard/msi/ms9652_fam10/romstage.c trunk/src/mainboard/nvidia/l1_2pvv/romstage.c trunk/src/mainboard/supermicro/h8dme/romstage.c trunk/src/mainboard/supermicro/h8dmr/romstage.c trunk/src/mainboard/supermicro/h8dmr_fam10/romstage.c trunk/src/mainboard/supermicro/h8qme_fam10/romstage.c trunk/src/mainboard/tyan/s2895/romstage.c trunk/src/mainboard/tyan/s2912/romstage.c trunk/src/mainboard/tyan/s2912_fam10/romstage.c
Modified: trunk/src/mainboard/amd/mahogany_fam10/romstage.c ============================================================================== --- trunk/src/mainboard/amd/mahogany_fam10/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/amd/mahogany_fam10/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -131,80 +131,9 @@ #endif /* (CONFIG_USE_FAILOVER_IMAGE == 0) */
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) #include "northbridge/amd/amdfam10/early_ht.c" #include "southbridge/amd/sb700/sb700_early_setup.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - int last_boot_normal_flag = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_flag) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - /* mov bsp to bus 0xff when > 8 nodes */ - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - - sb700_pci_port80(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_flag) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - -normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - -fallback_image: - #if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) - #endif - ; -} -#endif /* ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) */ - - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -//FIXME: I think that there is a hole here with the real_main() logic realmain is inside a CONFIG_USE_FAILOVER_IMAGE=0. -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if (CONFIG_USE_FAILOVER_IMAGE==0) //#include "spd_addr.h" #include "cpu/amd/microcode/microcode.c" @@ -218,7 +147,7 @@ #define DIMM2 0x52 #define DIMM3 0x53
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) {
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); @@ -227,6 +156,16 @@ u32 val; msr_t msr;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + /* mov bsp to bus 0xff when > 8 nodes */ + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + + sb700_pci_port80(); + } + post_code(0x30);
if (bist == 0) {
Modified: trunk/src/mainboard/amd/serengeti_cheetah/romstage.c ============================================================================== --- trunk/src/mainboard/amd/serengeti_cheetah/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/amd/serengeti_cheetah/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -154,82 +154,12 @@ #include "cpu/amd/model_fxx/fidvid.c" #endif
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - /* Setup the rom access for 4M */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr[] = { //first node @@ -259,6 +189,16 @@ struct cpuid_result cpuid1; #endif
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the rom access for 4M */ + amd8111_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); }
Modified: trunk/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c ============================================================================== --- trunk/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/amd/serengeti_cheetah_fam10/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -144,88 +144,15 @@ #endif /* (CONFIG_USE_FAILOVER_IMAGE == 0) */
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdfam10/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - int last_boot_normal_flag = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_flag) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - /* mov bsp to bus 0xff when > 8 nodes */ - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - - /* Setup the rom access for 4M */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_flag) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - -normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - -fallback_image: - #if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) - #endif - ; -} -#endif /* ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) */ - - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -//FIXME: I think that there is a hole here with the real_main() logic realmain is inside a CONFIG_USE_FAILOVER_IMAGE=0. -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - - #if (CONFIG_USE_FAILOVER_IMAGE==0) #include "spd_addr.h" #include "cpu/amd/microcode/microcode.c" #include "cpu/amd/model_10xxx/update_microcode.c"
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) {
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); @@ -233,6 +160,17 @@ u32 val; msr_t msr;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + /* mov bsp to bus 0xff when > 8 nodes */ + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + + /* Setup the rom access for 4M */ + amd8111_enable_rom(); + } + post_code(0x30);
if (bist == 0) {
Modified: trunk/src/mainboard/asus/a8n_e/romstage.c ============================================================================== --- trunk/src/mainboard/asus/a8n_e/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/asus/a8n_e/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -98,9 +98,6 @@
#endif /* CONFIG_USE_FAILOVER_IMAGE */
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) \ - || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/ck804/ck804_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c"
@@ -121,79 +118,8 @@ pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0, dword); }
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a CPU only reset? Or is this a secondary CPU? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the ck804 */ - ck804_enable_rom(); - - /* Is this a deliberate reset by the BIOS? */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - - /* This is the primary CPU. How should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } else { - goto fallback_image; - } - -normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - :"a" (bist), "b"(cpu_init_detectedx) /* inputs */ - ); - -fallback_image: - -#if CONFIG_HAVE_FAILOVER_BOOT == 1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - :"a" (bist), "b"(cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} - -#endif /* ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) ... */ - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT == 1 -#if CONFIG_USE_FAILOVER_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); -#else - real_main(bist, cpu_init_detectedx); -#endif -#else -#if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); -#endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE == 0 -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr[] = { (0xa << 3) | 0, (0xa << 3) | 2, 0, 0, @@ -208,6 +134,17 @@ unsigned nodes, bsp_apicid = 0; struct mem_controller ctrl[8];
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the ck804 */ + ck804_enable_rom(); + } + if (bist == 0) bsp_apicid = init_cpus(cpu_init_detectedx);
Modified: trunk/src/mainboard/gigabyte/ga_2761gxdk/romstage.c ============================================================================== --- trunk/src/mainboard/gigabyte/ga_2761gxdk/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/gigabyte/ga_2761gxdk/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -152,9 +152,6 @@
#endif
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - -#include "southbridge/sis/sis966/sis966_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c"
@@ -178,77 +175,9 @@ pci_write_config32(PCI_DEV(0, SIS966_DEVN_BASE+1 , 0), 0xa4, dword); }
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the sis966 */ - sis966_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr [] = { (0xa<<3)|0, (0xa<<3)|2, 0, 0, @@ -264,6 +193,18 @@ int needs_reset = 0; unsigned bsp_apicid = 0;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the sis966 */ + sis966_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); }
Modified: trunk/src/mainboard/gigabyte/m57sli/romstage.c ============================================================================== --- trunk/src/mainboard/gigabyte/m57sli/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/gigabyte/m57sli/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -150,8 +150,6 @@
#endif
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c"
@@ -176,77 +174,10 @@ pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); }
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -}
#if CONFIG_USE_FAILOVER_IMAGE==0
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr [] = { (0xa<<3)|0, (0xa<<3)|2, 0, 0, @@ -263,6 +194,18 @@ unsigned bsp_apicid = 0; uint8_t tmp = 0;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); }
Modified: trunk/src/mainboard/hp/dl145_g3/romstage.c ============================================================================== --- trunk/src/mainboard/hp/dl145_g3/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/hp/dl145_g3/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -155,8 +155,6 @@
#endif
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "northbridge/amd/amdk8/early_ht.c"
#if 0 @@ -197,78 +195,9 @@ } #endif
- -void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - /* Is this a cpu only reset? Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal()) { // RTC already inited - goto normal_image; //normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - bcm5785_enable_rom(); - bcm5785_enable_lpc(); - //enable RTC - pc87417_enable_dev(RTC_DEV); - - /* Is this a deliberate reset by the bios */ - - if (bios_reset_detected() && last_boot_normal()) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; - -} -#endif - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr[] = { //first node @@ -287,6 +216,17 @@ int needs_reset; unsigned bsp_apicid = 0;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + bcm5785_enable_rom(); + bcm5785_enable_lpc(); + //enable RTC + pc87417_enable_dev(RTC_DEV); + } +
if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
Modified: trunk/src/mainboard/iwill/dk8_htx/romstage.c ============================================================================== --- trunk/src/mainboard/iwill/dk8_htx/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/iwill/dk8_htx/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -130,82 +130,12 @@ #include "cpu/amd/model_fxx/fidvid.c" #endif
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - /* Setup the rom access for 4M */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr[] = { //first node @@ -224,6 +154,16 @@ int needs_reset; int i; unsigned bsp_apicid = 0;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the rom access for 4M */ + amd8111_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); }
Modified: trunk/src/mainboard/iwill/dk8s2/romstage.c ============================================================================== --- trunk/src/mainboard/iwill/dk8s2/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/iwill/dk8s2/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -130,82 +130,12 @@ #include "cpu/amd/model_fxx/fidvid.c" #endif
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - /* Setup the rom access for 4M */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr[] = { //first node @@ -224,6 +154,16 @@ int needs_reset; int i; unsigned bsp_apicid = 0;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the rom access for 4M */ + amd8111_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); }
Modified: trunk/src/mainboard/iwill/dk8x/romstage.c ============================================================================== --- trunk/src/mainboard/iwill/dk8x/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/iwill/dk8x/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -130,82 +130,12 @@ #include "cpu/amd/model_fxx/fidvid.c" #endif
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/amd/amd8111/amd8111_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c"
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - /* Setup the rom access for 4M */ - amd8111_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr[] = { //first node @@ -224,6 +154,16 @@ int needs_reset; int i; unsigned bsp_apicid = 0;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + /* Setup the rom access for 4M */ + amd8111_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); }
Modified: trunk/src/mainboard/msi/ms7135/romstage.c ============================================================================== --- trunk/src/mainboard/msi/ms7135/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/msi/ms7135/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -100,9 +100,6 @@
#endif /* CONFIG_USE_FAILOVER_IMAGE */
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) \ - || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/ck804/ck804_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c"
@@ -124,79 +121,8 @@ pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0, dword); }
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a CPU only reset? Or is this a secondary CPU? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the ck804 */ - ck804_enable_rom(); - - /* Is this a deliberate reset by the BIOS? */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - - /* This is the primary CPU. How should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } else { - goto fallback_image; - } - -normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - :"a" (bist), "b"(cpu_init_detectedx) /* inputs */ - ); - -fallback_image: - -#if CONFIG_HAVE_FAILOVER_BOOT == 1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - :"a" (bist), "b"(cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} - -#endif /* ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) ... */ - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT == 1 -#if CONFIG_USE_FAILOVER_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); -#else - real_main(bist, cpu_init_detectedx); -#endif -#else -#if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); -#endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE == 0 -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr[] = { (0xa << 3) | 0, (0xa << 3) | 1, 0, 0, @@ -211,6 +137,17 @@ struct mem_controller ctrl[8]; unsigned nodes;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the ck804 */ + ck804_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx); }
Modified: trunk/src/mainboard/msi/ms7260/romstage.c ============================================================================== --- trunk/src/mainboard/msi/ms7260/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/msi/ms7260/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -131,8 +131,6 @@
#endif
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c"
@@ -154,74 +152,9 @@ pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4, dword); }
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned int last_boot_normal_x = last_boot_normal(); - - /* Is this a CPU only reset? Or is this a secondary CPU? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) - goto normal_image; - else - goto fallback_image; - } - - /* Nothing special needs to be done to find bus 0. */ - /* Allow the HT devices to be found. */ - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the MCP55. */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the BIOS? */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary CPU. How should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } else { - goto fallback_image; - } - -normal_image: - __asm__ volatile ("jmp __normal_image": - :"a" (bist), "b"(cpu_init_detectedx) - ); - -fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image": - :"a" (bist), "b"(cpu_init_detectedx) - ) -#endif - ; -} -#endif - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT == 1 -#if CONFIG_USE_FAILOVER_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); -#else - real_main(bist, cpu_init_detectedx); -#endif -#else -#if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); -#endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE == 0
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr[] = { (0xa << 3) | 0, (0xa << 3) | 2, 0, 0, @@ -237,6 +170,17 @@ int needs_reset = 0; unsigned bsp_apicid = 0;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0. */ + /* Allow the HT devices to be found. */ + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the MCP55. */ + mcp55_enable_rom(); + } + if (bist == 0) bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
Modified: trunk/src/mainboard/msi/ms9652_fam10/romstage.c ============================================================================== --- trunk/src/mainboard/msi/ms9652_fam10/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/msi/ms9652_fam10/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -145,8 +145,6 @@
#endif
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdfam10/early_ht.c"
@@ -165,81 +163,12 @@ pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); }
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0 #include "spd_addr.h" #include "cpu/amd/microcode/microcode.c" #include "cpu/amd/model_10xxx/update_microcode.c"
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
@@ -249,6 +178,19 @@ u32 wants_reset; msr_t msr;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + } + post_code(0x30);
if (bist == 0) {
Modified: trunk/src/mainboard/nvidia/l1_2pvv/romstage.c ============================================================================== --- trunk/src/mainboard/nvidia/l1_2pvv/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/nvidia/l1_2pvv/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -150,8 +150,6 @@
#endif
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c"
@@ -177,77 +175,8 @@
}
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0 - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr [] = { (0xa<<3)|0, (0xa<<3)|2, 0, 0, @@ -263,6 +192,18 @@ int needs_reset = 0; unsigned bsp_apicid = 0;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); }
Modified: trunk/src/mainboard/supermicro/h8dme/romstage.c ============================================================================== --- trunk/src/mainboard/supermicro/h8dme/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/supermicro/h8dme/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -193,8 +193,6 @@
#endif
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c"
@@ -223,78 +221,13 @@
}
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - u32 last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } else { - goto fallback_image; - } -normal_image: - __asm__ volatile ("jmp __normal_image": /* outputs */ - :"a" (bist), "b"(cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image": /* outputs */ - :"a" (bist), "b"(cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 -#if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); -#else - real_main(bist, cpu_init_detectedx); -#endif -#else -#if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); -#endif - real_main(bist, cpu_init_detectedx); -#endif -} - /* We have no idea where the SMBUS switch is. This doesn't do anything ATM. */ #define RC0 (2<<8) #define RC1 (1<<8)
#if CONFIG_USE_FAILOVER_IMAGE==0
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { /* The SPD is being read from the CPU1 (marked CPU2 on the board) and we don't know how to switch the SMBus to decode the CPU0 SPDs. So, The @@ -319,6 +252,18 @@ int needs_reset = 0; unsigned bsp_apicid = 0;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); }
Modified: trunk/src/mainboard/supermicro/h8dmr/romstage.c ============================================================================== --- trunk/src/mainboard/supermicro/h8dmr/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/supermicro/h8dmr/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -139,8 +139,6 @@
#endif
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c"
@@ -169,77 +167,9 @@
}
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr [] = { (0xa<<3)|0, (0xa<<3)|2, 0, 0, @@ -255,6 +185,18 @@ int needs_reset = 0; unsigned bsp_apicid = 0;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); }
Modified: trunk/src/mainboard/supermicro/h8dmr_fam10/romstage.c ============================================================================== --- trunk/src/mainboard/supermicro/h8dmr_fam10/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/supermicro/h8dmr_fam10/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -135,8 +135,6 @@
#endif
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdfam10/early_ht.c"
@@ -165,81 +163,12 @@
}
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0 #include "spd_addr.h" #include "cpu/amd/microcode/microcode.c" #include "cpu/amd/model_10xxx/update_microcode.c"
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
@@ -248,6 +177,19 @@ u32 wants_reset; msr_t msr;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + } + post_code(0x30);
if (bist == 0) {
Modified: trunk/src/mainboard/supermicro/h8qme_fam10/romstage.c ============================================================================== --- trunk/src/mainboard/supermicro/h8qme_fam10/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/supermicro/h8qme_fam10/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -138,8 +138,6 @@
#endif
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdfam10/early_ht.c"
@@ -168,75 +166,6 @@
}
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0 #include "spd_addr.h" #include "cpu/amd/microcode/microcode.c" @@ -282,7 +211,7 @@ pnp_exit_ext_func_mode(GPIO3_DEV); }
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
@@ -291,6 +220,19 @@ u32 wants_reset; msr_t msr;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + } + post_code(0x30);
if (bist == 0) {
Modified: trunk/src/mainboard/tyan/s2895/romstage.c ============================================================================== --- trunk/src/mainboard/tyan/s2895/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/tyan/s2895/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -116,8 +116,6 @@
#endif
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/ck804/ck804_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c"
@@ -149,81 +147,9 @@
}
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the ck804 */ - ck804_enable_rom(); - - /* Is this a deliberate reset by the bios */ -// post_code(0x22); - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: -// post_code(0x23); - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b"(cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -// post_code(0x25); -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif - -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr [] = { (0xa<<3)|0, (0xa<<3)|2, 0, 0, @@ -240,6 +166,18 @@ struct mem_controller ctrl[8]; unsigned nodes;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the ck804 */ + ck804_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx); }
Modified: trunk/src/mainboard/tyan/s2912/romstage.c ============================================================================== --- trunk/src/mainboard/tyan/s2912/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/tyan/s2912/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -148,8 +148,6 @@
#endif
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c"
@@ -176,77 +174,9 @@
}
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr [] = { (0xa<<3)|0, (0xa<<3)|2, 0, 0, @@ -262,6 +192,18 @@ int needs_reset = 0; unsigned bsp_apicid = 0;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + } + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); }
Modified: trunk/src/mainboard/tyan/s2912_fam10/romstage.c ============================================================================== --- trunk/src/mainboard/tyan/s2912_fam10/romstage.c Wed Mar 17 23:09:26 2010 (r5254) +++ trunk/src/mainboard/tyan/s2912_fam10/romstage.c Wed Mar 17 23:44:39 2010 (r5255) @@ -144,8 +144,6 @@
#endif
-#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1)) - #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" #include "northbridge/amd/amdfam10/early_ht.c"
@@ -170,81 +168,12 @@
}
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) -{ - unsigned last_boot_normal_x = last_boot_normal(); - - /* Is this a cpu only reset? or Is this a secondary cpu? */ - if ((cpu_init_detectedx) || (!boot_cpu())) { - if (last_boot_normal_x) { - goto normal_image; - } else { - goto fallback_image; - } - } - - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - - set_bsp_node_CHtExtNodeCfgEn(); - enumerate_ht_chain(); - - sio_setup(); - - /* Setup the mcp55 */ - mcp55_enable_rom(); - - /* Is this a deliberate reset by the bios */ - if (bios_reset_detected() && last_boot_normal_x) { - goto normal_image; - } - /* This is the primary cpu how should I boot? */ - else if (do_normal_boot()) { - goto normal_image; - } - else { - goto fallback_image; - } - normal_image: - __asm__ volatile ("jmp __normal_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ); - - fallback_image: -#if CONFIG_HAVE_FAILOVER_BOOT==1 - __asm__ volatile ("jmp __fallback_image" - : /* outputs */ - : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ - ) -#endif - ; -} -#endif -void real_main(unsigned long bist, unsigned long cpu_init_detectedx); - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ -#if CONFIG_HAVE_FAILOVER_BOOT==1 - #if CONFIG_USE_FAILOVER_IMAGE==1 - failover_process(bist, cpu_init_detectedx); - #else - real_main(bist, cpu_init_detectedx); - #endif -#else - #if CONFIG_USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); - #endif - real_main(bist, cpu_init_detectedx); -#endif -} - #if CONFIG_USE_FAILOVER_IMAGE==0 #include "spd_addr.h" #include "cpu/amd/microcode/microcode.c" #include "cpu/amd/model_10xxx/update_microcode.c"
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
@@ -253,6 +182,19 @@ u32 wants_reset; msr_t msr;
+ if (!((cpu_init_detectedx) || (!boot_cpu()))) { + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + + set_bsp_node_CHtExtNodeCfgEn(); + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the mcp55 */ + mcp55_enable_rom(); + } + post_code(0x30);
if (bist == 0) {
-
repository service