Hello, Marc
-----Original Message----- From: coreboot-bounces@coreboot.org [mailto:coreboot-bounces@coreboot.org] On Behalf Of Marc Jones Sent: Thursday, January 19, 2012 2:28 AM To: Wolfgang Kamp - datakamp Cc: coreboot@coreboot.org Subject: Re: [coreboot] Issue with CIMX/SB800 PCIe Port Initialization
On Wed, Jan 18, 2012 at 8:11 AM, Wolfgang Kamp - datakamp wmkamp@datakamp.de wrote:
Hello Kerry, hello Marc,
sounds good but solves not my problem. The enumeration of the SB800 GPP
ports works fine with Linux.
But coreboot fails because the SB GPP ports are not yet initialized
when coreboot probes them.
The function sbPcieGppEarlyInit will be executed after coreboot PCI
probing of the SB GPP ports.
You can see that in late.c. I put that function now in the right place in the case (0x15<<0 | 0)
statement so probing succeeds.
And my Intel LAN GB82574 will be enumerated as I can see in the log. But if I do that coreboot hangs in tables.c with postcode 0x9c and I
can't imagine why.
I need the correct enumeration in coreboot because the Intel LAN chip
tools only works under DOS.
Wolfgang
Kerry,
I agree with Wolfgang. I think that the sb800 has an issue.
The sb900 wrapper appears to fix this issue with cimx setup in early
init.
Yes, sb900 put the sb_before_pci_init wrapper call at romstage. The problem is we can't get the configuration information from devicetree.cb in this way, all the configuration option is defined in a header file.
The device isn't visible in late init. The coreboot chip device scan will disable the device when it isn't found. The configuration needs to be set in early init like the sb900. Do you agree?
I think this is a compromise choice, we can unhide/hide the gpp device according to the devicetree.cb setting in sb800 dev_enable(), and then call the cimx function.
BTW. We using this way in the RD890 wrapper. Thanks
Kerry
Marc
-----Ursprüngliche Nachricht----- Von: She, Kerry [mailto:Kerry.She@amd.com] Gesendet: Mittwoch, 18. Januar 2012 08:49 An: She, Kerry; Marc Jones; Wolfgang Kamp - datakamp Cc: coreboot@coreboot.org; chia, kenneth Betreff: Re: [coreboot] Issue with CIMX/SB800 PCIe Port Initialization
Hello Marc and Wolfgang
-----Original Message----- From: coreboot-bounces@coreboot.org [mailto:coreboot-bounces@coreboot.org] On Behalf Of She, Kerry Sent: Tuesday, January 17, 2012 4:07 PM To: Marc Jones; Wolfgang Kamp - datakamp Cc: coreboot@coreboot.org Subject: Re: [coreboot] Issue with CIMX/SB800 PCIe Port Initialization
Hello Walfqang,
-----Original Message----- From: coreboot-bounces@coreboot.org [mailto:coreboot-
bounces@coreboot.org]
On Behalf Of Marc Jones Sent: Tuesday, January 17, 2012 3:23 AM To: Wolfgang Kamp - datakamp Cc: coreboot@coreboot.org Subject: Re: [coreboot] Issue with CIMX/SB800 PCIe Port Initialization
On Mon, Jan 16, 2012 at 10:18 AM, Wolfgang Kamp - datakamp wmkamp@datakamp.de wrote:
Hello,
I found a problem with the PCI enumeration of the PCIe Ports in the CIMX/SB800 Southbridge for the INAGUA platform.
The .../southbridge/amd/cimx/sb800/late.c routine calls the function sb_Before_PCI_Init after
case (0x16 >>3) | 2. This means when the PCI Express ports (0x15 <<3)
|
0
are probed in the routine ../devices/pci_device.c function
pci_probe_dev they are not yet initialized. The probing fails and
also
devices behind the bridge are not recognized.
Behind the PCIe bridge I have an Intel 82574 LAN chip.
But if I move the call to sb_Before_PCI_Init behind case (0x15 <<3)
|
0 the
enumeration succeed but coreboot crashes later into nothing. The Sage Debugger fails.
I can't imagine why.
Marc have you any idea?
This looks like a problem in the sb800 cimx wrapper logic. Cimx doesn't treat the devices separately. it lumps all the configuration and enables together, making the coreboot chipset device enable callback fail to enable the device, so it gets disabled. The sb900 wrapper appears to fix this issue with cimx setup in early init. You may want to try porting those changes to the sb800.
I don't know why it fails later, but I assume it is due to the missing config since you moved the call earlier in the process. You could try calling it multiple times. I'm not sure how it handles
that, though.
Kerry, Do you have any comments?
If the enumeration fail, I suggest you should check the PCIE deassert GPIO setting. Thanks
I found the recent amd/inagua code in the git tree is not boot on my
platform and more.
I made an update to make my platform works now. The missing mainboard specific GPIO setting also added back, So the
sb800 GPP enumeration works now.
Please reference following link and the attachment. http://review.coreboot.org/#change,542 http://review.coreboot.org/#change,543 http://review.coreboot.org/#change,544 http://review.coreboot.org/#change,545 http://review.coreboot.org/#change,546
Thanks Kerry
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot