I successfully booted the DB800 evaluation board with coreboot v2, however I can't step the boot code via JTAG (FS2 System Navigator). Following is the console dump. Anybody experienced the same problem?
======================================================================= System Analyzer for Geode(tm) GX/LX Processor Serial number 40464 Software version 2.1.3 build 3 Hardware version sysnav Copyright (C) 1998-2005 First Silicon Solutions, Inc. The initialization file, user.tcl, has completed successfully. 1> reset User reset. cs:0xFFF0u E9F176 jmp 0x76e4 2> config {BkptPoll 100} {BtmHack off} {ChipType auto} {Coherent auto} {DisablePowerManagement off} {DisableTrace off} {EipHack off} {Flash SST49LF004B-block} {GdbPort 54545} {JtagChain 24,X} {Path C:/PROGRA~1/Fs2/Geode/Bin} {Port sysnav-usb} {ReserveDR off} {ResetDuration 500} {RestoreAllRegs off} {ShowFtw off} {TckRate 700000} {TraceFlushEip 0xfffffff3} {TrigInActiveState 0} {TrigOutActiveState 0} {TrigOutTarget off} {TvccThreshold 1500} {UserDR off} 3> step CPU does not respond to stop requests. CPU could be hung. =======================================================================
TIA, llandre
DAVE Electronics System House - R&D Department web: http://www.dave.eu email: r&d2@dave-tech.it