On Mon, Jul 5, 2010 at 9:58 PM, Daniel J. Celta dcelta@gmail.com wrote:
Greg, Could you point me to the right "Wiki" page, so I can provide what you are referring to. I am thinking machine and motherboard specs, but I want to make sure I am looking at the same page you are. Thanks
On Mon, Jul 5, 2010 at 5:51 PM, Gregg Levine gregg.drwho8@gmail.com wrote:
On Mon, Jul 5, 2010 at 5:02 PM, Daniel J. Celta dcelta@gmail.com wrote:
Has anyone updated this Supermicro server Board BIOS for the H8DME-2......
I have installed FC10, (i was able to complete this installation by turning of the RAID configuration in the BIOS), and now I am having trouble when trying to upgrade the Operating system to FC13.
I suspect, if I update the BIOS, I currently have the version of the BIOS that came pre-installed with the server, I may be able to upgrade to FC13.
One thing I like to mention, when running "make menuconfig" I was not sure of the ROM Chip size, and used the largest available setting 4MB.
- How can I check the proper setting for this parameter????
So now, I have created the coreboot.rom, and think I am ready to run "flashrom".......
Is there anything else I need to check before I pull the trigger???
Has anyone had any problems I should be aware of????
Thanks
Daniel
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot
Hello! I confess I'm not familiar with that board. Why don't you post the exact same things that the Wiki asks for? That way the rest of us, even those of us who do know it, can advise you? I do however believe you're on the right path.
Gregg C Levine gregg.drwho8@gmail.com "This signature fought the Time Wars, time and again."
Hello! I found it listed here: http://www.coreboot.org/Supported_Motherboards
It's on the entries marked as servers, and of course via the vendor's entered name. Third one down from there. ----- Gregg C Levine gregg.drwho8@gmail.com "This signature fought the Time Wars, time and again."