On Sat, 28 Jun 2008 09:41:08 +0800, "Jensen Qin" freevanx@qmobile.org wrote:
mm, OK, I'd like to try porting coreboot v2 to this board, some detail information about this board http://www.sun.com/servers/blades/x6250/specs.xml
And some specs: Intel(R) 5000P/5000V/5000Z Chipset Memory Controller Hub (MCH) -
Datasheet
http://www.intel.com/design/chipsets/datashts/313071.htm
Intel(R) 6400/6402 Advanced Memory Buffer Datasheet http://www.intel.com/design/chipsets/datashts/313072.htm
Intel(R) 631xESB/632xESB I/O Controller Hub Datasheet http://www.intel.com/design/chipsets/datashts/313082.htm
PC8374 series datasheets
http://194.67.26.35/datasheets/datasheet-pdf/National-Semiconductor/PC8374.h...
About the mainboard, I think I can refer some e7501 code, but I'm not expect too much, these two boards are so much different. The same with the northbridge, maybe some e75xx code as reference. About the southbridge, I wish I can refer esb6300's code. The PC8374 superIO chip have already ported by someone.
And, does anybody have other advice about this?
I think that is the newest Intel chiset we have support for, so that code may be the place to start. I beleive the 3100 base code started out as e7501, and the 3100 code is much more updated. The Intel 3100 is supported by Ed Swierk, he is a really smart guy, and may be able to offer some help if you have any questions, as well as any if us on the mailing list :-)