hi can someone confirm that i have the following correct?
i have an EPIA-M m/board with an SST39SF020A bios chip, along with an RD1-PL 2Mbit bios savour, are these both 2Mb chips? i have tried writing the RD1 with a image file, but it always fails :( anyone any pointers?
have so far tried to write image aprox 8 times, still with no luck :( this is the output from flashrom :- Original BIOS # ./flashrom Calibrating delay loop... ok No LinuxBIOS table found. Enabling flash write on VT8235...tried to set 0x45 to 0x55 on VT8235 failed (WARNING ONLY) SST39SF020A found at physical address: 0xfffc0000 Flash part is SST39SF020A OK, only ENABLING flash write, but NOT FLASHING.
RD1-PL BIOS # ./flashrom Calibrating delay loop... ok No LinuxBIOS table found. Enabling flash write on VT8235...OK W49F002U found at physical address: 0xfffc0000 Flash part is W49F002U OK, only ENABLING flash write, but NOT FLASHING.
as far as i can tell both are 2M bios, is htere something that prevent writing to the differant chip number properly?
PS. this bios savour worked fine on my EPIA-PD board, always writing corectly first time :(
Many thanks in advance
Matt