Author: stuge Date: 2009-11-26 14:54:40 +0100 (Thu, 26 Nov 2009) New Revision: 4957
Modified: trunk/util/msrtool/geodelx.c Log: Add the following GeodeLX memory controller MSRs
0x20000018 MC_CF07_DATA 0x20000019 MC_CF8F_DATA 0x2000001a MC_CF1017_DATA 0x2000001b MC_CFPERF_CNT1 0x2000001c MC_PERFCNT2 0x2000001d MC_CFCLK_DBUG
Signed-off-by: Nathan Williams nathan@traverse.com.au Signed-off-by: Peter Stuge peter@stuge.se Acked-by: Nathan Williams nathan@traverse.com.au
Modified: trunk/util/msrtool/geodelx.c =================================================================== --- trunk/util/msrtool/geodelx.c 2009-11-25 08:35:59 UTC (rev 4956) +++ trunk/util/msrtool/geodelx.c 2009-11-26 13:54:40 UTC (rev 4957) @@ -25,6 +25,298 @@ }
const struct msrdef geodelx_msrs[] = { + { 0x20000018, MSRTYPE_RDWR, MSR2(0x10071007, 0x40), "MC_CF07_DATA", "Refresh and SDRAM Program", { + { 63, 4, "D1_SZ", "DIMM1 Size", PRESENT_BIN, { + { MSR1(0), "Reserved" }, + { MSR1(1), "8 MB" }, + { MSR1(2), "16 MB" }, + { MSR1(3), "32 MB" }, + { MSR1(4), "64 MB" }, + { MSR1(5), "128 MB" }, + { MSR1(6), "256 MB" }, + { MSR1(7), "512 MB" }, + { MSR1(8), "1 GB" }, + { MSR1(9), "Reserved" }, + { MSR1(10), "Reserved" }, + { MSR1(11), "Reserved" }, + { MSR1(12), "Reserved" }, + { MSR1(13), "Reserved" }, + { MSR1(14), "Reserved" }, + { MSR1(15), "Reserved" }, + { BITVAL_EOT } + }}, + { 59, 3, RESERVED }, + { 56, 1, "D1_MB", "DIMM1 Module Banks", PRESENT_BIN, { + { MSR1(0), "1 Module bank" }, + { MSR1(1), "2 Module banks" }, + { BITVAL_EOT } + }}, + { 55, 3, RESERVED }, + { 52, 1, "D1_CB", "DIMM1 Component Banks", PRESENT_BIN, { + { MSR1(0), "2 Component banks" }, + { MSR1(1), "4 Component banks" }, + { BITVAL_EOT } + }}, + { 51, 1, RESERVED }, + { 50, 3, "D1_PSZ", "DIMM1 Page Size", PRESENT_BIN, { + { MSR1(0), "1 KB" }, + { MSR1(1), "2 KB" }, + { MSR1(2), "4 KB" }, + { MSR1(3), "8 KB" }, + { MSR1(4), "16 KB" }, + { MSR1(5), "32 KB" }, + { MSR1(6), "Reserved" }, + { MSR1(7), "DIMM1 Not Installed" }, + { BITVAL_EOT } + }}, + { 47, 4, "D0_SZ", "DIMM0 Size", PRESENT_BIN, { + { MSR1(0), "Reserved" }, + { MSR1(1), "8 MB" }, + { MSR1(2), "16 MB" }, + { MSR1(3), "32 MB" }, + { MSR1(4), "64 MB" }, + { MSR1(5), "128 MB" }, + { MSR1(6), "256 MB" }, + { MSR1(7), "512 MB" }, + { MSR1(8), "1 GB" }, + { MSR1(9), "Reserved" }, + { MSR1(10), "Reserved" }, + { MSR1(11), "Reserved" }, + { MSR1(12), "Reserved" }, + { MSR1(13), "Reserved" }, + { MSR1(14), "Reserved" }, + { MSR1(15), "Reserved" }, + { BITVAL_EOT } + }}, + { 43, 3, RESERVED }, + { 40, 1, "D0_MB", "DIMM0 Module Banks", PRESENT_BIN, { + { MSR1(0), "1 Module bank" }, + { MSR1(1), "2 Module banks" }, + { BITVAL_EOT } + }}, + { 39, 3, RESERVED }, + { 36, 1, "D0_CB", "DIMM0 Component Banks", PRESENT_BIN, { + { MSR1(0), "2 Component banks" }, + { MSR1(1), "4 Component banks" }, + { BITVAL_EOT } + }}, + { 35, 1, RESERVED }, + { 34, 3, "D0_PSZ", "DIMM0 Page Size", PRESENT_BIN, { + { MSR1(0), "1 KB" }, + { MSR1(1), "2 KB" }, + { MSR1(2), "4 KB" }, + { MSR1(3), "8 KB" }, + { MSR1(4), "16 KB" }, + { MSR1(5), "32 KB" }, + { MSR1(6), "Reserved" }, + { MSR1(7), "DIMM0 Not Installed" }, + { BITVAL_EOT } + }}, + { 31, 2, RESERVED }, + { 29, 2, "MSR_BA", "Mode Register Set Bank Address", PRESENT_BIN, { + { MSR1(0), "Program the DIMM Mode Register" }, + { MSR1(1), "Program the DIMM Extended Mode Register" }, + { MSR1(2), "Reserved" }, + { MSR1(3), "Reserved" }, + { BITVAL_EOT } + }}, + { 27, 1, "RST_DLL", "Mode Register Reset DLL", PRESENT_BIN, { + { MSR1(0), "Do not reset DLL" }, + { MSR1(1), "Reset DLL" }, + { BITVAL_EOT } + }}, + { 26, 1, "EMR_QFC", "Extended Mode Register FET Control", PRESENT_BIN, { + { MSR1(0), "Enable" }, + { MSR1(1), "Disable" }, + { BITVAL_EOT } + }}, + { 25, 1, "EMR_DRV", "Extended Mode Register Drive Strength Control", PRESENT_BIN, { + { MSR1(0), "Normal" }, + { MSR1(1), "Reduced" }, + { BITVAL_EOT } + }}, + { 24, 1, "EMR_DLL", "Extended Mode Register DLL", PRESENT_BIN, { + { MSR1(0), "Enable" }, + { MSR1(1), "Disable" }, + { BITVAL_EOT } + }}, + { 23, 16, "REF_INT", "Refresh Interval", PRESENT_DEC, NOBITS }, + { 7, 4, "REF_STAG", "Refresh Staggering", PRESENT_DEC, NOBITS }, + { 3, 1, "REF_TST", "Test Refresh", PRESENT_BIN, NOBITS }, + { 2, 1, RESERVED }, + { 1, 1, "SOFT_RST", "Software Reset", PRESENT_BIN, NOBITS }, + { 0, 1, "PROG_DRAM", "Program Mode Register in SDRAM", PRESENT_BIN, NOBITS }, + { BITS_EOT } + }}, + { 0x20000019, MSRTYPE_RDWR, MSR2(0x18000008, 0x287337a3), "MC_CF8F_DATA", "Timing and Mode Program", { + { 63, 8, "STALE_REQ", "GLIU Max Stale Request Count", PRESENT_DEC, NOBITS }, + { 55, 3, RESERVED }, + { 52, 2, "XOR_BIT_SEL", "XOR Bit Select", PRESENT_BIN, { + { MSR1(0), "ADDR[18]" }, + { MSR1(1), "ADDR[19]" }, + { MSR1(2), "ADDR[20]" }, + { MSR1(3), "ADDR[21]" }, + { BITVAL_EOT } + }}, + { 50, 1, "XOR_MB0", "XOR MB0 Enable", PRESENT_BIN, { + { MSR1(0), "Disabled" }, + { MSR1(1), "Enabled" }, + { BITVAL_EOT } + }}, + { 49, 1, "XOR_BA1", "XOR BA1 Enable", PRESENT_BIN, { + { MSR1(0), "Disabled" }, + { MSR1(1), "Enabled" }, + { BITVAL_EOT } + }}, + { 48, 1, "XOR_BA0", "XOR BA0 Enable", PRESENT_BIN, { + { MSR1(0), "Disabled" }, + { MSR1(1), "Enabled" }, + { BITVAL_EOT } + }}, + { 47, 6, RESERVED }, + { 41, 1, "TRUNC_DIS", "Burst Truncate Disable", PRESENT_BIN, { + { MSR1(0), "Bursts Enabled" }, + { MSR1(1), "Bursts Disabled" }, + { BITVAL_EOT } + }}, + { 40, 1, "REORDER_DIS", "Reorder Disable", PRESENT_BIN, { + { MSR1(0), "Reordering Enabled" }, + { MSR1(1), "Reordering Disabled" }, + { BITVAL_EOT } + }}, + { 39, 6, RESERVED }, + { 33, 1, "HOI_LOI", "High / Low Order Interleave Select", PRESENT_BIN, { + { MSR1(0), "Low Order Interleave" }, + { MSR1(1), "High Order Interleave" }, + { BITVAL_EOT } + }}, + { 32, 1, RESERVED }, + { 31, 1, "THZ_DLY", "tHZ Delay", PRESENT_BIN, NOBITS }, + { 30, 3, "CAS_LAT", "Read CAS Latency", PRESENT_BIN, { + { MSR1(0), "Reserved" }, + { MSR1(1), "Reserved" }, + { MSR1(2), "2" }, + { MSR1(3), "3" }, + { MSR1(4), "4" }, + { MSR1(5), "1.5" }, + { MSR1(6), "2.5" }, + { MSR1(7), "3.5" }, + { BITVAL_EOT } + }}, + { 27, 4, "ACT2ACTREF", "ACT to ACT/REF Period. tRC", PRESENT_DEC, NOBITS }, + { 23, 4, "ACT2PRE", "ACT to PRE Period. tRAS", PRESENT_DEC, NOBITS }, + { 19, 1, RESERVED }, + { 18, 3, "PRE2ACT", "PRE to ACT Period. tRP", PRESENT_DEC, NOBITS }, + { 15, 1, RESERVED }, + { 14, 3, "ACT2CMD", "Delay Time from ACT to Read/Write. tRCD", PRESENT_DEC, NOBITS }, + { 11, 4, "ACT2ACT", "ACT(0) to ACT(1) Period. tRRD", PRESENT_DEC, NOBITS }, + { 7, 2, "DPLWR", "Data-in to PRE Period. tDPLW", PRESENT_DEC, { + { MSR1(0), "Invalid value" }, + { MSR1(1), "1" }, + { MSR1(2), "2" }, + { MSR1(3), "3" }, + { BITVAL_EOT } + }}, + { 5, 2, "DPLRD", "Data-in to PRE Period. tDPLR", PRESENT_DEC, { + { MSR1(0), "Invalid value" }, + { MSR1(1), "1" }, + { MSR1(2), "2" }, + { MSR1(3), "3" }, + { BITVAL_EOT } + }}, + { 3, 4, RESERVED }, + { BITS_EOT } + }}, + { 0x2000001a, MSRTYPE_RDWR, MSR2(0, 0x11080001), "MC_CF1017_DATA", "Feature Enables", { + { 63, 34, RESERVED }, + { 29, 2, "WR_TO_RD", "Write to Read Delay. tWTR", PRESENT_DEC, NOBITS }, + { 27, 1, RESERVED }, + { 26, 3, "RD_TMG_CTL", "Read Timing Control", PRESENT_DEC, NOBITS }, + { 23, 3, RESERVED }, + { 20, 5, "REF2ACT", "Refresh to Activate Delay. tRFC", PRESENT_DEC, NOBITS }, + { 15, 8, "PM1_UP_DLY", "PMode1 Up Delay", PRESENT_DEC, NOBITS }, + { 7, 5, RESERVED }, + { 2, 3, "WR2DAT", "Write Command to Data Latency", PRESENT_DEC, { + { MSR1(0), "No delay" }, + { MSR1(1), "1-clock delay for unbuffered DIMMs" }, + { MSR1(2), "2-clock delay" }, + { MSR1(3), "Invalid value" }, + { BITVAL_EOT } + }}, + { BITS_EOT } + }}, + { 0x2000001b, MSRTYPE_RDONLY, MSR2(0, 0), "MC_CFPERF_CNT1", "Performance Counters", { + { 63, 32, "CNT0", "Counter 0", PRESENT_DEC, NOBITS }, + { 31, 32, "CNT1", "Counter 1", PRESENT_DEC, NOBITS }, + { BITS_EOT } + }}, + { 0x2000001c, MSRTYPE_RDWR, MSR2(0, 0x00ff00ff), "MC_PERFCNT2", "Counter and CAS Control", { + { 63, 28, RESERVED }, + { 35, 1, "STOP_CNT1", "Stop Counter 1", PRESENT_DEC, NOBITS }, + { 34, 1, "RST_CNT1", "Reset Counter 1", PRESENT_DEC, NOBITS }, + { 33, 1, "STOP_CNT0", "Stop Counter 0", PRESENT_DEC, NOBITS }, + { 32, 1, "RST_CNT0", "Reset Counter 0", PRESENT_DEC, NOBITS }, + { 31, 32, RESERVED }, + { BITS_EOT } + }}, + { 0x2000001d, MSRTYPE_RDWR, MSR2(0, 0x1300), "MC_CFCLK_DBUG", "Clocking and Debug", { + { 63, 29, RESERVED }, + { 34, 1, "B2B_DIS", "Back-to-Back Command Disable", PRESENT_BIN, { + { MSR1(0), "Allow back-to-back commands" }, + { MSR1(1), "Disable back-to-back commands" }, + { BITVAL_EOT } + }}, + { 33, 1, "MTEST_RBEX_EN", "MTEST RBEX Enable", PRESENT_BIN, { + { MSR1(0), "Disable" }, + { MSR1(1), "Enable" }, + { BITVAL_EOT } + }}, + { 32, 1, "MTEST_EN", "MTEST Enable", PRESENT_BIN, { + { MSR1(0), "Disable" }, + { MSR1(1), "Enable" }, + { BITVAL_EOT } + }}, + { 31, 15, RESERVED }, + { 16, 1, "FORCE_PRE", "Force Precharge-all", PRESENT_BIN, { + { MSR1(0), "Disable" }, + { MSR1(1), "Enable" }, + { BITVAL_EOT } + }}, + { 15, 3, RESERVED }, + { 12, 1, "TRISTATE_DIS", "TRI-STATE Disable", PRESENT_BIN, { + { MSR1(0), "Tri-stating enabled" }, + { MSR1(1), "Tri-stating disabled" }, + { BITVAL_EOT } + }}, + { 11, 2, RESERVED }, + { 9, 1, "MASK_CKE1", "CKE1 Mask", PRESENT_BIN, { + { MSR1(0), "CKE1 output enable unmasked" }, + { MSR1(1), "CKE1 output enable masked" }, + { BITVAL_EOT } + }}, + { 8, 1, "MASK_CKE0", "CKE0 Mask", PRESENT_BIN, { + { MSR1(0), "CKE0 output enable unmasked" }, + { MSR1(1), "CKE0 output enable masked" }, + { BITVAL_EOT } + }}, + { 7, 1, "CNTL_MSK1", "Control Mask 1", PRESENT_BIN, { + { MSR1(0), "DIMM1 CAS1# RAS1# WE1# CS[3:2]# output enable unmasked" }, + { MSR1(1), "DIMM1 CAS1# RAS1# WE1# CS[3:2]# output enable masked" }, + { BITVAL_EOT } + }}, + { 6, 1, "CNTL_MSK0", "Control Mask 0", PRESENT_BIN, { + { MSR1(0), "DIMM0 CAS0# RAS0# WE0# CS[1:0]# output enable unmasked" }, + { MSR1(1), "DIMM0 CAS0# RAS0# WE0# CS[1:0]# output enable masked" }, + { BITVAL_EOT } + }}, + { 5, 1, "ADRS_MSK", "Address Mask", PRESENT_BIN, { + { MSR1(0), "MA and BA output enable unmasked" }, + { MSR1(1), "MA and BA output enable masked" }, + { BITVAL_EOT } + }}, + { 4, 5, RESERVED }, + { BITS_EOT } + }}, { 0x4c00000f, MSRTYPE_RDWR, MSR2(0, 0), "GLCP_DELAY_CONTROLS", "GLCP I/O Delay Controls", { { 63, 1, "EN", "Enable", PRESENT_DEC, { { MSR1(0), "Use default values" },