* mostly working EPIA-MII with 6-26v 60w atx picoPSU * a spare samsung 256mb ddr ram * ide2cf * pcmcia2cf * cf cards * soekris net4801 * soekris net4826 * prism2/atheros minipci/pci/pcmcia abg/bg/b wifi cards * pci 1394a without rom * old agp/pci vga cards with rom * pci aha-2940au scsi with rom * 8x100 ethernet switch, some 10m cables, parts for making cables * usb2serial * sata/ata/usb/1394/nullmodem cables * usb flash drive if I can find one * some plcc 512k am29lf040b and one 256k sst39sf020a * plcc remover tool * miniature screwdrivers (aka diy plcc remover tool) * usb2sata 3.5" case * usb fdd * usb hub(s) * ac-12v 1.5a psu * ac-12v 2.5a psu * ac-3/5/9/12v 2.5a psu * ac-power-over-ethernet injector * a dumb euro power strip or two * a 5m extension cord or two * cd-r/dvd-r media * flashlight * 10" gray vga crt * ps/2 .se keyboard
- usb debug device
Will be interesting.
Does someone have a working development platform for high-speed USB devices that they can bring if we want to make our own debug device? I'm looking around, Cypress SX2 or Philips (now NXP) ISP1505 looks good, but I wont have a working setup by next week. I'll bring some microcontrollers if there's anything to control.
- (multimeter+soldering iron)
Good idea. If I take the micros I'll bring the soldering kit too.
plus other stuff that might be required..?
I can bring a 15" 1280x1024 TFT and an analog 40MHz oscilloscope (just one slightly sad probe; BYO probes) too if there's need.
//Peter