Re: [LinuxBIOS] flashrom fails on GA-M57SLI with 1MB ROM

[Andreas B. Mundt]

Hi,

building a LAB-image with buildrom (I had to do this on an other
32-bit machine) flashing now works for me, too. I tried to find out
why, but so far without success. Some configuration might differ? 
What can go wrong switching to 1024kB?

Ideas?

Thanks,

Andi

Below my LinuxBIOSv2/targets/gigabyte/m57sli/Config.lb:

$grep -Ev '^(#|$)' Config.lb

target m57sli
mainboard gigabyte/m57sli
option ROM_SIZE=0x100000
romimage "normal"
        option USE_FAILOVER_IMAGE=0
        option USE_FALLBACK_IMAGE=0
        option ROM_IMAGE_SIZE=0x20000
        option XIP_ROM_SIZE=0x40000
        option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
        payload ../../../../../../filo-0.5/filo.elf
        option DEFAULT_CONSOLE_LOGLEVEL=8
        option MAXIMUM_CONSOLE_LOGLEVEL=8
end
romimage "fallback"
        option USE_FAILOVER_IMAGE=0
        option USE_FALLBACK_IMAGE=1
        option ROM_IMAGE_SIZE=0x20000
        option XIP_ROM_SIZE=0x40000
        option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
        payload ../../../../../../filo-0.5/filo.elf
        option DEFAULT_CONSOLE_LOGLEVEL=8
        option MAXIMUM_CONSOLE_LOGLEVEL=8
end
romimage "failover"
        option USE_FAILOVER_IMAGE=1
        option USE_FALLBACK_IMAGE=0
        option ROM_IMAGE_SIZE=FAILOVER_SIZE
        option XIP_ROM_SIZE=FAILOVER_SIZE
        option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Failover"
end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" "failover"