Author: stuge Date: 2009-11-21 07:02:48 +0100 (Sat, 21 Nov 2009) New Revision: 4951
Modified: trunk/util/msrtool/geodelx.c Log: Add GLCP_SYS_RSTPLL MSR defines for GeodeLX
Signed-off-by: Peter Stuge peter@stuge.se Acked-by: Nathan Williams nathan@traverse.com.au
Modified: trunk/util/msrtool/geodelx.c =================================================================== --- trunk/util/msrtool/geodelx.c 2009-11-19 14:25:31 UTC (rev 4950) +++ trunk/util/msrtool/geodelx.c 2009-11-21 06:02:48 UTC (rev 4951) @@ -94,6 +94,74 @@ { 4, 5, "DLL_OVS/RSDA", "DLL Override Setting or Read Strobe Delay Adjust", PRESENT_DEC, NOBITS }, { BITS_EOT } }}, + { 0x4c000014, MSRTYPE_RDWR, MSR2(0, 0), "GLCP_SYS_RSTPLL", "GLCP System Reset and PLL Control", { + { 63, 20, RESERVED }, + { 43, 5, "GLIUMULT", "GLIU Multiplier", PRESENT_DEC, NOBITS }, + { 38, 1, "GLIUDIV", "GLIU Divide", PRESENT_DEC, { + { MSR1(0), "Do not predivide input" }, + { MSR1(1), "Divide by 2" }, + { BITVAL_EOT } + }}, + { 37, 5, "COREMULT", "CPU Core Multiplier", PRESENT_DEC, NOBITS }, + { 32, 1, "COREDIV", "CPU Core Divide", PRESENT_DEC, { + { MSR1(0), "Do not predivide input" }, + { MSR1(1), "Divide by 2" }, + { BITVAL_EOT } + }}, + { 31, 6, "SWFLAGS", "Flags", PRESENT_BIN, NOBITS }, + { 25, 1, "GLIULOCK", "GLIU PLL Lock", PRESENT_DEC, { + { MSR1(1), "PLL locked" }, + { MSR1(0), "PLL is not locked" }, + { BITVAL_EOT } + }}, + { 24, 1, "CORELOCK", "CPU Core PLL Lock", PRESENT_DEC, { + { MSR1(1), "PLL locked" }, + { MSR1(0), "PLL is not locked" }, + { BITVAL_EOT } + }}, + { 23, 8, "HOLD_COUNT", "Hold Count, divided by 16", PRESENT_DEC, NOBITS }, + { 15, 1, RESERVED }, + { 14, 1, "GLIUPD", "GLIU PLL Power Down mode", PRESENT_DEC, NOBITS }, + { 13, 1, "COREPD", "CPU Core PLL Power Down mode", PRESENT_DEC, NOBITS }, + { 12, 1, "GLIUBYPASS", "GLIU PLL Bypass", PRESENT_DEC, { + { MSR1(1), "DOTREF input directly drives the GLIU clock spines" }, + { MSR1(0), "DOTPLL drives the GLIU clock" }, + { BITVAL_EOT } + }}, + { 11, 1, "COREBYPASS", "CPU Core PLL Bypass", PRESENT_DEC, { + { MSR1(1), "DOTREF input directly drives the CPU Core clock" }, + { MSR1(0), "DOTPLL drives the CPU Core clock" }, + { BITVAL_EOT } + }}, + { 10, 1, "LPFEN", "Loop Filter", PRESENT_DEC, { + { MSR1(1), "Enabled" }, + { MSR1(0), "Disabled" }, + { BITVAL_EOT } + }}, + { 9, 1, "VA_SEMI_SYNC_MODE", "CPU-GLIU Sync Mode", PRESENT_DEC, { + { MSR1(1), "CPU does not use GLIU FIFO" }, + { MSR1(0), "The GLIU FIFO is used by the CPU" }, + { BITVAL_EOT } + }}, + { 8, 1, "PCI_SEMI_SYNC_MODE", "PCI-GLIU Sync Mode", PRESENT_DEC, { + { MSR1(1), "PCI does not use mb_func_clk and pci_func_clk falling edges" }, + { MSR1(0), "Falling edges on mb_func_clk and pci_func_clk are used by PCI" }, + { BITVAL_EOT } + }}, + { 7, 1, "BOOTSTRAP_PW1", "PW1 bootstrap", PRESENT_DEC, { + { MSR1(1), "66MHz PCI clock" }, + { MSR1(0), "33MHz PCI clock" }, + { BITVAL_EOT } + }}, + { 6, 1, "BOOTSTRAP_IRQ13", "IRQ13 bootstrap", PRESENT_DEC, { + { MSR1(1), "Stall-on-reset debug feature enabled" }, + { MSR1(0), "No stall" }, + { BITVAL_EOT } + }}, + { 5, 5, "BOOTSTRAPS", "CPU/GLIU frequency select", PRESENT_BIN, NOBITS }, + { 0, 1, "CHIP_RESET", "Chip Reset", PRESENT_DEC, NOBITS }, + { BITS_EOT } + }}, /* { 0, MSRTYPE_RDONLY, MSR2(0, 0), "TEMPLATE", "Template MSR", { { 63, 64, RESERVED },