RE: [LinuxBIOS] buildtarget error

[Hamish Guthrie]

Adam,

I had a brief look at the epia-m code a few weeks ago and found the same
issues with the buildtarget and compile issues all over the place. The tree
that is there is very broken, and it took me a while just to get it to
compile. I found a number of run-time issues, then I fried my test board! I
am awaiting a replacement.

Hamish
> -----Original Message-----
> From: [e-mail]
> [mailto:[e-mail]]On Behalf Of Adam Talbot
> Sent: Freitag, 13. Mai 2005 05:42
> To: Adam Talbot
> Cc: [e-mail]
> Subject: Re: [LinuxBIOS] buildtarget error
>
> Well, i got past that error...
> But the epia-m still does not compile, same error on the south
> bridge, any
> ideas?
> -Adam
> ----- Original Message -----
> From: "Adam Talbot" 
> To: "Ronald G. Minnich" 
> Cc: 
> Sent: Thursday, May 12, 2005 7:59 PM
> Subject: [LinuxBIOS] buildtarget error
> > OK, so I am feeling about as bright as a door nob.
> > Working on the EPIA-MII, and I cant get it to "buildtarget".
> > The problem is there is only 29 lines in my Config.lb. So I am not sure
> > where the error is coming from.
> > Any ideas?
> >
> > # ./buildtarget via/epia-mii
> > build_dir=via/epia-mii/epia-mii
> > ./buildtarget: line 46: [: via/epia-mii/epia-mii: binary
>
> operator expected
> > #
> >
> > -Adam Talbot
> >
> > LinuxBIOS mailing list
> > [e-mail]
> > http://www.openbios.org/mailman/listinfo/linuxbios
>
> LinuxBIOS mailing list
> [e-mail]
> http://www.openbios.org/mailman/listinfo/linuxbios