Hi,
I got a new PC Engines ALIX board, which comes with the Geode LX800 / CS5536 chip.
Since Pascal Dornier from PC Engines has shipped another board to Ron Minnich a few days ago, I contacted him already. Ron is interested in helping, but away for the next two weeks.
So I got started, trying to let 'flashrom' detect the pieces. Note: I am an absolutely beginner when it comes to LinuxBIOS! So please forgive me if I explain things a bitn odd or wrong. ;-)
The chipset is not detected.
FLASH_ENABLE enables[] need an entry for 0x1022, 0x2090 and a enable_flash function. That's problem #1. What must be done inside flash_enable for that flash?
Problem #2: the flash device is not deteced. However, I read on the flash chip "SST 49LF040B". According to the flashrom sources it should be supported.
Any idea what's wrong here or what I would need to do?
Thanks a lot in advance!!
regards, Ingmar