Author: mjones Date: 2008-11-11 22:16:21 +0100 (Tue, 11 Nov 2008) New Revision: 252
Removed: buildrom-devel/packages/filo/conf/dbm690t-Config Modified: buildrom-devel/config/platforms/dbm690t.conf Log: We don't need to save the dbm690t filo config file for the new version of filo. (trivial)
Signed-off-by: Marc Jones marcj303@yahoo.com Acked-by: Marc Jones marcj303@yahoo.com
Modified: buildrom-devel/config/platforms/dbm690t.conf =================================================================== --- buildrom-devel/config/platforms/dbm690t.conf 2008-10-29 15:55:16 UTC (rev 251) +++ buildrom-devel/config/platforms/dbm690t.conf 2008-11-11 21:16:21 UTC (rev 252) @@ -54,10 +54,6 @@ # Tell construct-rom.sh to pad the ROM to a power of 2 PLATFORM_DOPAD := -p
-# FILO configuration - -FILO_CONFIG=dbm690t-Config - # VIDEO BIOS configuration
ifeq ($(CONFIG_AMD_R690_CUSTOM_VBIOS),y)
Deleted: buildrom-devel/packages/filo/conf/dbm690t-Config =================================================================== --- buildrom-devel/packages/filo/conf/dbm690t-Config 2008-10-29 15:55:16 UTC (rev 251) +++ buildrom-devel/packages/filo/conf/dbm690t-Config 2008-11-11 21:16:21 UTC (rev 252) @@ -1,102 +0,0 @@ -# !!! NOTE !!! -# Do NOT add spaces or comments at the end of option lines. -# It confuses some versions of make. - -# Use grub instead of autoboot? -USE_GRUB = 1 - -# Grub menu.lst path -# SATA -# MENULST_FILE = "hda1:/boot/filo/menu.lst" -# PATA -MENULST_FILE = "hde1:/boot/filo/menu.lst" - -# time before default menu.lst is chosen. Set to 0 to ignore -MENULST_TIMEOUT = 3 - -# Image filename for automatic boot and optional command line parameter -#AUTOBOOT_FILE = "hde1:/vmlinuz root=/dev/hda1 console=tty0 console=ttyS0,115200" -#AUTOBOOT_FILE = "mem@0xfff80000" -#AUTOBOOT_FILE = "hde1@0" -#AUTOBOOT_FILE = "uda1:/vmlinuz.elf" - -# Time in second before booting AUTOBOOT_FILE -AUTOBOOT_DELAY = 2 - -# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus -IDE_DISK = 1 - -# Add a short delay when polling status registers -# (required on some broken SATA controllers) -# NOTE: Slows down access significantly, so disable -# whenever possible. -#IDE_DISK_POLL_DELAY = 1 - -# Use PCMCIA compact flash on Via Epia MII10000 and MII6000E -# This device is referred to as hde. -#PCMCIA_CF = 1 - -# Driver for USB Storage -# USB_DISK = 1 - -# VGA text console -VGA_CONSOLE = 1 -PC_KEYBOARD = 1 - -# Serial console -SERIAL_CONSOLE = 1 -SERIAL_IOBASE = 0x3f8 -# if SERIAL_SPEED is commented out, the speed will not be changed. -#SERIAL_SPEED = 115200 - -# Filesystems -FSYS_EXT2FS = 1 -FSYS_FAT = 1 -#FSYS_JFS = 1 -#FSYS_MINIX = 1 -FSYS_REISERFS = 1 -#FSYS_XFS = 1 -FSYS_ISO9660 = 1 - -# Support for boot disk image in bootable CD-ROM (El Torito) -ELTORITO = 1 - -# PCI support -SUPPORT_PCI = 1 - -# Enable this to scan PCI busses above bus 0 -# AMD64 based boards do need this. -PCI_BRUTE_SCAN = 1 - -# Sound support (needs SUPPORT_PCI) -#SUPPORT_SOUND = 1 - -# Sound drivers -#VIA_SOUND = 1 - -# Debugging -DEBUG_ALL = 1 -#DEBUG_ELFBOOT = 1 -#DEBUG_ELFNOTE = 1 -#DEBUG_LINUXBIOS = 1 -#DEBUG_MALLOC = 1 -#DEBUG_MULTIBOOT = 1 -#DEBUG_SEGMENT = 1 -#DEBUG_SYS_INFO = 1 -#DEBUG_TIMER = 1 -#DEBUG_BLOCKDEV = 1 -#DEBUG_PCI = 1 -#DEBUG_VIA_SOUND = 1 -#DEBUG_LINUXLOAD = 1 -#DEBUG_IDE = 1 -#DEBUG_USB = 1 -#DEBUG_ELTORITO = 1 - -# i386 options - -# Loader for standard Linux kernel image, a.k.a. /vmlinuz -LINUX_LOADER = 1 - -# Boot FILO from Multiboot loader (eg. GRUB) -#MULTIBOOT_IMAGE = 1 -