PCI: 02:06.0 30 <- [0x00fff80000 - 0x00fff7ffff] rom
It seems it can not be processed by pci_set_resource properly.
YH
-----Original Message----- From: Li-Ta Lo [mailto:ollie@lanl.gov] Sent: Wednesday, January 12, 2005 10:10 PM To: YhLu Cc: Sagiv Yefet; LinuxBIOS Subject: RE: Running with VGA
On Wed, 2005-01-12 at 23:07, YhLu wrote:
You assign the value to the new resource.
I wonder if it will confuse the resource allocator. Because the range is
out
of touch of allocator.
I don't think so but I am not sure neither. The resource is flagged as FIXED and ASSIGNED. The resource allocator should leave that resource as is. If it does not work, we can just write dev->rom_address to PCI_ROM_ADDRESS directly in pci_get_rom_resource() and the pci_rom_probe() can still be unchanged.
Could you try the code?
Ollie
YH
-----Original Message----- From: Li-Ta Lo [mailto:ollie@lanl.gov] Sent: Wednesday, January 12, 2005 9:48 PM To: YhLu Cc: Sagiv Yefet; LinuxBIOS Subject: RE: Running with VGA
On Wed, 2005-01-12 at 21:02, YhLu wrote:
Committed.
Also I added readme in /drivers/pci/onboard/onboard.c
YH
I made some modification which should utilize the resource allocation code and minimize the impact of the embedded ROM image. I was doing it blindly, please test it on your platform.
Ollie