There is a little question for me, is this a normal output?
Why is the run_bios_int called three times? Remember, on LB I have three calls, too. What is done after these calls. It seems that there are no differences between the second and the third one.
There is a ip (initial point) flag for testbios. Is there someting else for the inTree one.
Is testbios faster with given ip.
chris
QLC-> ./testbios --abseg /dev/mem -s 32768 aw512n.bin running file aw512n.bin No base specified. defaulting to 0xc0000 No initial code segment specified. defaulting to 0xc000 No initial instruction pointer specified. defaulting to 0x0003 updating int vector 0x10 updating int vector 0x10 updating int vector 0x42 updating int vector 0x42 updating int vector 0x43 updating int vector 0x43 updating int vector 0x1f updating int vector 0x1f updating int vector 0x1d updating int vector 0x1d updating int vector 0x1d updating int vector 0x1d updating int vector 0x10 updating int vector 0x10 updating int vector 0x10 int10 vector at c41b4 updating int vector 0x10 updating int vector 0x10 updating int vector 0x10 updating int vector 0x10 updating int vector 0x10 updating int vector 0x10 run_bios_int: INT 10 CS:IP = c000:41b4 updating int vector 0x43 updating int vector 0x43 updating int vector 0x43 updating int vector 0x10 updating int vector 0x10 updating int vector 0x10 int10 vector at c41b4 updating int vector 0x10 updating int vector 0x10 updating int vector 0x10 updating int vector 0x10 updating int vector 0x10 updating int vector 0x10 run_bios_int: INT 10 CS:IP = c000:41b4 updating int vector 0x43 updating int vector 0x43 updating int vector 0x43 updating int vector 0x10 updating int vector 0x10 updating int vector 0x10 int10 vector at c41b4 updating int vector 0x10 updating int vector 0x10 updating int vector 0x10 updating int vector 0x10 updating int vector 0x10 updating int vector 0x10 run_bios_int: INT 10 CS:IP = c000:41b4 updating int vector 0x43 updating int vector 0x43 updating int vector 0x1d updating int vector 0x1d QLC->