On Sun, Mar 25, 2007 at 06:05:51PM +0200, Luc Verhaegen wrote:
On Sun, Mar 25, 2007 at 01:40:23AM -0400, Corey Osgood wrote:
Luc, could you check out the PCChips M789CG for me and see if this can support it? The stock bios is an AMIBIOS (if it matters), with a VT8235M southbridge and ITE IT8705f Super I/O (docs here: http://www.iteusa.com/product_info/file/pc/IT8705F_V.0.4.1.pdf). I've tried both the epia-m and asus fixups that are currently in your patch, but neither of them worked, and I know very little about the workings of flashrom. Here's the line with my vendor ids:
{ 0x1106, 0x3177, 0x1106, 0x0000, 0x1106, 0x3123, 0x1106, 0x0000, "PCChips M789CG(v3.0)", enable_flash_xxx },
Oh, PCChips, isn't that another name for Asrock isn't it? In any case, that's yet another known pci-id offender.
Also, should we be moving these board-specific flash fixups off into another file? I get the feeling we're going to have a lot of them in the future.
Thanks, Corey
I'll hand you a bit of python in a few hours that gathers the following information.
- Int16 vector for AMI
- Dump of 0xE0000-0xFFFFF. The int16 vector should live here, and the
AWDFLASH structure exists here too.
So a tiny bit of python will provide for AMI and AWD.
Attached.
Do send the rom to me personally, i don't think everyone on the list wants to receive a 128kB file :)
Luc Verhaegen.