On Mon, 2007-12-10 at 17:32 -0700, Marc Jones wrote:
Steve Isaacs wrote:
INIT detected from ---- {APICID = 00 NODEID = 00 COREID = 00} ---
Issuing SOFT_RESET...
When I have seen a soft reset at this point it has been due to a memory problem. Try simpler configurations and try putting some basic memory test just before CAR is disabled. I would try on the interesting boundaries. For example, check where LinuxBIOS gets copied at 2MB and across a dimm boundary like 1GB+2MB.
ram_check(0x00200000, 0x00200000 + (640 * 1024)); ram_check(0x40200000, 0x40200000 + (640 * 1024));
Also, most of the memory registers are located in Function 2 if you decide to dump and compare them.
Thanks, I'll give it a try. So, it may be that this problem is masking a correct config?
It might be tomorrow or the next day before I have a result. I've got meetings and a doc to finish.
Steve