On Tue, Nov 4, 2008 at 9:58 AM, Carl-Daniel Hailfinger < c-d.hailfinger.devel.2006@gmx.net> wrote:
On 01.11.2008 22:28, Carl-Daniel Hailfinger wrote:
On 01.11.2008 20:11, Carl-Daniel Hailfinger wrote:
On 01.11.2008 18:56, Corey Osgood wrote:
System reset seems to occur between 2 and 3, both of those logs
attached,
along with arch/x86/via/stage1.o With HALT_AFTER=3, the post code keeps changing, as expected with the system rebooting, with HALT_AFTER=2 it
was
0xc2.
Great results, thanks a lot! One bug spotted and fixed. Can you retest with the same method and the updated patch attached to this mail? I hope it will die much later, perhaps at HALT_AFTER=13 or so.
Thanks for the information that HALT_AFTER=5 is the last working setting.
OK, I reread every line of the code and reimplemented the problematic stuff from scratch.
Can you try the new patch with HALT_AFTER=5 and 6? I'm pretty confident that if 6 works, all later numbers should also not reboot. By the way, the new code should be even better than the (working) v2 code.
I'll test it out this evening, thanks!
-Corey