[LinuxBIOS] r2967 - trunk/util/flashrom

Author: jcrouse
Date: 2007-11-13 17:45:22 +0100 (Tue, 13 Nov 2007)
New Revision: 2967

Modified:
   trunk/util/flashrom/chipset_enable.c
Log:
[LinuxBIOS] flashrom support for AMD Geode CS5536

Attached is a patch that enables AMD Geode CS5536 chipset support.  I
have tested it successfully on a MSM800 board from digital logic.

Signed-off-by: Lane Brooks 
Acked-by: Jordan Crouse

Modified: trunk/util/flashrom/chipset_enable.c
===================================================================
--- trunk/util/flashrom/chipset_enable.c	2007-11-13 16:24:15 UTC (rev 2966)
+++ trunk/util/flashrom/chipset_enable.c	2007-11-13 16:45:22 UTC (rev 2967)
@@ -23,9 +23,15 @@
  * Contains the chipset specific flash enables.
  */

+#define _LARGEFILE64_SOURCE
+
 #include <stdio.h>
 #include <pci/pci.h>
 #include <stdlib.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
 #include "flash.h"

static int enable_flash_ali_m1533(struct pci_dev *dev, char *name)
@@ -218,6 +224,54 @@
    return 0;
 }

+static int enable_flash_cs5536(struct pci_dev *dev, char *name)
+{
+	int fd_msr;
+	unsigned char buf[8];
+	unsigned int addr = 0x1808;
+
+	/* Geode systems write protect the BIOS via RCONFs (cache
+	 * settings similar to MTRRs). To unlock, change MSR 0x1808
+	 * top byte to 0x22. Reading and writing to msr, however
+	 * requires instrucitons rdmsr/wrmsr, which are ring0 privileged
+	 * instructions so only the kernel can do the read/write.  This
+	 * function, therefore, requires that the msr kernel module be
+	 * loaded to access these instructions from user space using
+	 * device /dev/cpu/0/msr.  This hard-coded driver location
+	 * could have potential problems on SMP machines since it
+	 * assumes cpu0, but it is safe on the geode which is not SMP.
+	 *
+	 * This is probably not portable beyond linux.
+	 */
+
+	fd_msr = open("/dev/cpu/0/msr", O_RDONLY);
+	if (!fd_msr) {
+		perror("open msr");
+		return -1;
+	}
+	lseek64(fd_msr, (off64_t) addr, SEEK_SET);
+	read(fd_msr, buf, 8);
+	close(fd_msr);
+	if (buf[7] != 0x22) {
+		printf("Enabling Geode MSR to write to flash.\n");
+		buf[7] = 0x22;
+		fd_msr = open("/dev/cpu/0/msr", O_WRONLY);
+		if (!fd_msr) {
+			perror("open msr");
+			return -1;
+		}
+		lseek64(fd_msr, (off64_t) addr, SEEK_SET);
+		if (write(fd_msr, buf, 8) < 0) {
+			perror("msr write");
+			printf
+			    ("Cannot write to MSR.  Make sure msr kernel is loaded: 'modprobe msr'\n");
+			return -1;
+		}
+		close(fd_msr);
+	}
+	return 0;
+}
+
 static int enable_flash_sc1100(struct pci_dev *dev, char *name)
 {
    uint8_t new;
@@ -460,6 +514,7 @@
    {0x1078, 0x0100, "CS5530/CS5530A", enable_flash_cs5530},
    {0x100b, 0x0510, "SC1100", enable_flash_sc1100},
    {0x1039, 0x0008, "SIS5595", enable_flash_sis5595},
+	{0x1022, 0x2080, "AMD GEODE CS5536", enable_flash_cs5536},
    {0x1022, 0x7468, "AMD8111", enable_flash_amd8111},
    {0x10B9, 0x1533, "ALi M1533", enable_flash_ali_m1533},
    /* this fallthrough looks broken. */