Re: [coreboot] Unable to build coreboot with Intel FSP debug binary on BayleyBay

[Zoran Stojsavljevic]

Hello Kathappan,

As my understanding is (I might be wrong, please, others correct), you
should have the whole Coreboot + BYT-I FSP build of maximum 2MB (last/top
2MB on the top of 8MB board SPI flash). The line:

*E: Could not add [fsp, 294912 bytes (288 KB)@0x1bff00]; too big?*

Says that you are trying to add some entity (fsp) of size 288KB on the
0x200000 - 0x1BFF00 = 256KB + 256B.

The other line:

*E: Failed to add '../intel/fsp/baytrail/BAYTRAIL_FSP_D.fd' into ROM image.*

Implies that your BAYTRAIL_FSP_D.fd image is 288KB size wide, so you left
too narrow space for FSP image to fit in Coreboot build.

You need to go back to Coreboot .config (to run make menuconfig) and
understand what additional Coreboot features you need to deprecate/exclude
(to make more space), in order to make this last region at least minimum of
288KB or bigger/wider.

Zoran

On Fri, May 6, 2016 at 7:39 AM, Kathappan E <[e-mail]
> wrote:
> Hi all,
>
> I am able to build Coreboot with FSP Baytrail release binary(
> *BAYTRAIL_FSP_GOLD_004_22-MAY-2015.fd*).
>
> But I am unable to build with FSP Baytrail debug binary  (
> *BAYTRAIL_FSP_GOLD_004_22-MAY-2015_DEBUG.fd*) and it throws the below
> error says that binary size is large and fails to add into image.
>
> *The sections containing CBFSes are: COREBOOT*
>
> *Performing operation on 'COREBOOT' region...*
>
> *Created CBFS (capacity = 2096856 bytes)*
>
> *Performing operation on 'COREBOOT' region...*
>
> *Performing operation on 'COREBOOT' region...*
> CBFS       fsp.bin*
>
> *Performing operation on 'COREBOOT' region...*
>
> *E: Not enough space for content.*
>
> *E: Could not add [fsp, 294912 bytes (288 KB)@0x1bff00]; too big?*
>
> *E: Failed to add '../intel/fsp/baytrail/BAYTRAIL_FSP_D.fd' into ROM
> image.*
>
> *E: Failed while operating on 'COREBOOT' region!*
>
> *E: The image will be left unmodified.*
>
> *make: *** [build/coreboot.pre] Error 1*
>
> Can you please anyone help me on this?
>
> Thanks in advance,
>
> Kathappan
>
> *L&T Technology Services Ltd*
>
> www.LntTechservices.com http://www.lnttechservices.com/
>
> This Email may contain confidential or privileged information for the
> intended recipient (s). If you are not the intended recipient, please do
> not use or disseminate the information, notify the sender and delete it
> from your system.