I wanted get up to date with the latest code developments with Linuxbios on the HDAMA board. I downloaded the current source tree from sourceforge this morning. The build went just fine. However, it gets stuck during initialization. The only code change I made to the latest version was to change the PAYLOAD to FILO 0.4. (The version from a few weeks ago makes, compiles, and boots Linux using FILO 0.3.)
I'm guessing that there is some configuration change needed for HDAMA. Any thoughts?
-- Craig Forney, Opus Innovations LLC
Latest version (not working):
Copying LinuxBIOS to ram. 003 booting... Finding PCI configuration type. PCI: Using configuration type 1 Enumerating: AMD K8 Northbridge Enumerating: AMD K8 Northbridge Enumerating: AMD K8 Enumerating: AMD K8 Enumerating: AMD 8111 Enumerating: NSC 87360 Enumerating buses...PCI: pci_scan_bus for bus 0 PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] ops PCI: 00:18.3 [1022/1103] enabled PCI: 00:19.0 [ffff/ffff] enabled PCI: 00:19.1 [ffff/ffff/00ffff] has unknown header type ff, ignoring. PCI: 00:19.1 No device operations PCI: 00:19.2 [ffff/ffff/00ffff] has unknown header type ff, ignoring. PCI: 00:19.2 No device operations PCI: 00:19.3 [ffff/ffff/00ffff] has unknown header type ff, ignoring. PCI: 00:19.3 No device operations amdk8_scan_chains max: 0 starting...
Earlier version (working):
LinuxBIOS-1.1.4.0Fallback Thu Oct 9 03:02:57 PDT 2003 starting... Copying LinuxBIOS to ram. Jumping to LinuxBIOS. LinuxBIOS-1.1.4.0Fallback Thu Oct 9 03:02:57 PDT 2003 booting... Finding PCI configuration type. PCI: Using configuration type 1 Enumerating: AMD K8 Northbridge Enumerating: AMD K8 Northbridge Enumerating: AMD K8 Enumerating: AMD K8 Enumerating: NSC 87360 Enumerating buses...PCI: pci_scan_bus for bus 0 PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] ops PCI: 00:18.3 [1022/1103] enabled PCI: 00:19.0 [1022/1100] enabled PCI: 00:19.1 [1022/1101] enabled PCI: 00:19.2 [1022/1102] enabled PCI: 00:19.3 [1022/1103] ops PCI: 00:19.3 [1022/1103] enabled amdk8_scan_chains max: 0 starting... Hyper transport scan link: 0 max: 1 PCI: 01:01.0 [1022/7450] enabled next_unitid: 0003 PCI: 01:03.0 [1022/7460] enabled next_unitid: 0007 HyperT reset needed