With some changes to filo, the sata can be used as normal IDE device in filo.
Last problem in filo is only can boot from port 0 and port 1, and can not boot from port 2 and port 3. That is SI 3114 limitation.
After install SUSE 9 Pro for AMD64, use following can boot into disk. hde2:/boot/vmlinuz initrd=/boot/initrd ro root=/dev/sda2 console=tty0 console=ttyS0,115200
Please note "root=/dev/sda2", because kernel in Suse think it is SCSI just as new 2.6 kernel.
regards
YH
-----邮件原件----- 发件人: YhLu 发送时间: 2004年4月28日 21:12 收件人: ron minnich; Langlois Evan 抄送: Hendricks David W.; linuxbios@clustermatic.org 主题: Re: LinuxBIOS Video?
1. S2875 support is in the CVS tree already. 2. ATI randon --- At this time, you may not get the output from very beginning. 3. boot sata --- good question, I will try that. Maybe need to add some code in filo.
Regards
YH _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios