Re: [LinuxBIOS] ICH7DH: flash_enable failed

[Uwe Hermann]

On Tue, Mar 27, 2007 at 07:21:06PM +0400, Anton wrote:
> flashrom's output below. what I've missed so far?

Which chip is this? And on which mainboard do you try to use flashrom?
> Calibrating delay loop... Setting up microsecond timing loop
> 798M loops per second
> ok
> No LinuxBIOS table found.
> Enabling flash write on ICH7DH...tried to set 0xdc to 0x3 on ICH7DH failed (WARNING ONLY)

This _could_ be a problem, but not necessarily. It might also work, I
think.

Uwe.