fantastic ;)
On 10/26/05, Eric W. Biederman ebiederman@lnxi.com wrote:
San Mehat san@google.com writes:
While we're on the 'error handling' track, I also had an issue where 'ht_optimize_link()' was continually indicating that a reset was
required and
causing an endless reset loop. The culprit was the code which performs
an 8 bit
read to get the *current* frequency of the link and doesn't mask off the
error
bits next to the frequency bits (bits 0-4 are frequency, and bits 5-7
are error
status).
Once again, this was triggered by a transient error on the link (likely
due to
link retraining).
Thanks. We just committed an equivalent version. :)
Eric