Hi Nico and Julius,
Thank you for the helpful tips. I will look into the fmd files in the tree and see if I can come up with something sensible for this board.
I'll update you on any progress (or lack thereof).
Cheers, Hal
On Sat, May 19, 2018 at 4:57 PM, Nico Huber nico.h@gmx.de wrote:
Hi,
On 19.05.2018 02:27, Julius Werner wrote:
Apollolake looks quite different, and I don't really know all the
details,
but somehow the reset vector is interwoven with that IFWI thing near the front of the ROM. You can see an example Chrome OS Apollolake FMAP in src/mainboard/google/reef/chromeos.fmd, and compare it to a normal
Chrome
OS x86 FMAP like src/mainboard/google/glados/chromeos.fmd . The
Apollolake
support was added by Chrome OS folks, so maybe they didn't bother
adapting
the default-x86.fmd mechanism to work with it because all the Chrome OS boards have their own FMAP anyway. You may be able to get further in your build if you copy the reef/chromeos.fmd file, adapt it to your mainboard
if
necessary, and then point to it with CONFIG_FMDFILE.
I'm not an expert for Apollo Lake either, but I know other Intel plat- forms and my way around their documentation.
I too believe that adding an .fmd file like Julius described, will fix your problem. Though, there are already some non-CrOS boards in the tree. Might be more worth looking at their (simpler) .fmd (e.g. `src/mainboard/siemens/mc_apl1/mc_apl1.fmd`).
Regarding the details, I've digged around a little. Here is what I found out so far (stop reading here unless you really want to know, it might confuse you even more):
Apollo Lake uses a Firmware Descriptor (IFD) like other Intel platforms, but the IFD's layout is used much less. One region amidst this layout is the IFWI. The IFWI is partitioned by other means and contains code for some integrated controllers and also what used to be the BIOS. The latter is divided into IBB and OBB. The IBB partition is used for core- boot's bootblock. The OBB partition for everything else in coreboot. The OBB is the last part of the IFWI.
To make the situation even more confusing, somebody had the great idea to use the same term, IFWI, for something slightly different. I guess to separate the read-only from updateable parts better, IFWI in the notion of coreboot's .fmd files is the actual IFWI minus the OBB. I will refer to it as the RO_CORE_IFWI (might not be the worst idea to rename it like this in coreboot). So what happens during build (cf. `soc/intel/ apollolake/Makefile.inc:125`):
coreboot is provided an IFWI image (that has to contain all the coreboot-unrelated code for the extra chipset controllers, those are just passed through by our build system).
Our build system crafts the RO_CORE_IFWI with the provided IFWI: o The OBB is stripped off. o The IBB is replaced with coreboot's bootblock.
The final image is build with o the RO_CORE_IFWI in place of IFWI in the .fmd and o all other coreboot parts in their respective place in the .fmd.
Looking at the `mc_apl1.fmd` again:
- SI_DESC is like the Intel Firmware Descriptor.
- IFWI is the RO_CORE_IFWI (IFWI minus OBB with replaced IBB).
- Everything else before DEVICE_EXTENSION is the OBB.
- DEVICE_EXTENSIONS is another partition in the IFD, that I've just learned about.
Nico
PS. This is how I would have written such .fmd (currently not compatible to `apollolake/Makefile.inc`):
FLASH 16M { SI_DESC@0x0 0x1000 IFWI@0x1000 0xefe000 { RO_CORE_IFWI@0x0 0x2ff000 OBB@0x2ff000 0xbff000 { FMAP@0x0000 0x800 COREBOOT(CBFS)@0x800 0xb9d800 UNIFIED_MRC_CACHE@0xb9e000 0x21000 { RECOVERY_MRC_CACHE@0x0 0x10000 RW_MRC_CACHE@0x10000 0x10000 RW_VAR_MRC_CACHE@0x20000 0x1000 } BIOS_UNUSABLE@0xbbf000 0x40000 } } DEVICE_EXTENSION@0xeff000 0x100000 UNUSED_HOLE@0xfff000 0x1000 }