Sven Schnelle (svens@stackframe.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1116
-gerrit
commit 3505f09e9c25332a430c77fdfcb41ed45e9039cc Author: Sven Schnelle svens@stackframe.org Date: Wed Jun 20 14:54:08 2012 +0200
i3100: add smbus_write_byte()
Required for Supermicro X7DB8, which needs the FBDIMM clock generator setup during romstage.
Change-Id: I30ca8354087e851487aee0614595782131d4d9bc Signed-off-by: Sven Schnelle svens@stackframe.org --- src/southbridge/intel/i3100/early_smbus.c | 7 ++++- src/southbridge/intel/i3100/smbus.c | 14 +++++++++ src/southbridge/intel/i3100/smbus.h | 43 +++++++++++++++++++++++++++++ 3 files changed, 63 insertions(+), 1 deletions(-)
diff --git a/src/southbridge/intel/i3100/early_smbus.c b/src/southbridge/intel/i3100/early_smbus.c index f3d4450..035c0a9 100644 --- a/src/southbridge/intel/i3100/early_smbus.c +++ b/src/southbridge/intel/i3100/early_smbus.c @@ -37,7 +37,12 @@ static void enable_smbus(void) outb(0, SMBUS_IO_BASE + SMBHSTCTL); }
-static int smbus_read_byte(u32 device, u32 address) +static __attribute__((unused)) int smbus_read_byte(u32 device, u32 address) { return do_smbus_read_byte(SMBUS_IO_BASE, device, address); } + +static __attribute__((unused)) int smbus_write_byte(unsigned device, u8 address, u8 data) +{ + return do_smbus_write_byte(SMBUS_IO_BASE, device, address, data); +} diff --git a/src/southbridge/intel/i3100/smbus.c b/src/southbridge/intel/i3100/smbus.c index 23602ac..c11237a 100644 --- a/src/southbridge/intel/i3100/smbus.c +++ b/src/southbridge/intel/i3100/smbus.c @@ -41,8 +41,22 @@ static int lsmbus_read_byte(device_t dev, u8 address) return do_smbus_read_byte(res->base, device, address); }
+static int lsmbus_write_byte(device_t dev, u8 address, u8 byte) +{ + u16 device; + struct resource *res; + struct bus *pbus; + + device = dev->path.i2c.device; + pbus = get_pbus_smbus(dev); + res = find_resource(pbus->dev, 0x20); + + return do_smbus_write_byte(res->base, device, address, byte); +} + static struct smbus_bus_operations lops_smbus_bus = { .read_byte = lsmbus_read_byte, + .write_byte = lsmbus_write_byte, };
static void smbus_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/intel/i3100/smbus.h b/src/southbridge/intel/i3100/smbus.h index 7023a5b..478974e 100644 --- a/src/southbridge/intel/i3100/smbus.h +++ b/src/southbridge/intel/i3100/smbus.h @@ -110,3 +110,46 @@ static int do_smbus_read_byte(u32 smbus_io_base, u16 device, u8 address) } return byte; } + +static int do_smbus_write_byte(unsigned smbus_base, unsigned device, unsigned address, unsigned data) +{ + unsigned char global_status_register; + + if (smbus_wait_until_ready(smbus_base) < 0) + return SMBUS_WAIT_UNTIL_READY_TIMEOUT; + + /* Setup transaction */ + /* Disable interrupts */ + outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL); + /* Set the device I'm talking too */ + outb(((device & 0x7f) << 1) & ~0x01, smbus_base + SMBXMITADD); + /* Set the command/address... */ + outb(address & 0xff, smbus_base + SMBHSTCMD); + /* Set up for a byte data read */ + outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x2 << 2), + (smbus_base + SMBHSTCTL)); + /* Clear any lingering errors, so the transaction will run */ + outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT); + + /* Clear the data byte... */ + outb(data, smbus_base + SMBHSTDAT0); + + /* Start the command */ + outb((inb(smbus_base + SMBHSTCTL) | 0x40), + smbus_base + SMBHSTCTL); + + /* Poll for transaction completion */ + if (smbus_wait_until_done(smbus_base) < 0) + return SMBUS_WAIT_UNTIL_DONE_TIMEOUT; + + global_status_register = inb(smbus_base + SMBHSTSTAT); + + /* Ignore the "In Use" status... */ + global_status_register &= ~(3 << 5); + + /* Read results of transaction */ + if (global_status_register != (1 << 1)) + return SMBUS_ERROR; + + return 0; +}