Re: [LinuxBIOS] GIGABYTE GA-2761GXDK

[蔡明耀 (my_tsai)]

----- Original Message ----- 
From: "Uwe Hermann" 
To: "Morgan Tsai /SiS" 
Cc: ; "Ray Wang /SiS" ; "Jordan Crouse" ; "Eric Lin /SiS" 
Sent: Tuesday, November 20, 2007 11:52 PM
Subject: Re: [LinuxBIOS] GIGABYTE GA-2761GXDK
> On Tue, Nov 20, 2007 at 06:53:59PM +0800, Morgan Tsai /SiS wrote:
> > Change Log:
> > Fix pirq routing table setting for GA-2761GXDK.
> > Southbridge PCIe slots are working correctly now.
> > Disable keyboard & mouse ports for GA-2761GXDK.
> >
> > Signed-off-by: Morgan Tsai
>
> Looks good, but why disable PS/2 keyboard and mouse? Aren't these
> connectors available at all on the board or should the keyboard/mouse
> init be done by the southbridge (there is some code in *_lpc.c)?

There is no connector and pin available on board. So it didn't need any resource.
Attachment is the board's picture.
> Also, can you please fill the status table in the wiki about which
> hardware on the board works fine and which is work in progress?
>
> Please see
> http://linuxbios.org/GIGABYTE_GA-2761GXDK_Build_Tutorial
> where I have created an empty table. Do you have a wiki account
> already to change the page? You can contact Stefan Reinauer
>  for an account.
>
> Alternatively, you can also post the status via email, I can fix up the
> wiki then. Please use "OK" for fully working parts, "N/A" for hardware
> which is not available on the board, "WIP" for parts which you are still
> working on.
>
> I'm currently writing a page to explain how to test all the hardware,
> but it's not finished yet: http://linuxbios.org/Board_Testing_HOWTO

Now I fill the current status I am certain.
There is a identical board I have deliverd for Ron Minnich.
We can check it with him.
> Here's the whole status table for the board:
>
> |CPU_status = OK
> |CPU_L1_status = OK
> |CPU_L2_status = OK
> |CPU_L3_status = N/A
> |CPU_multiple_status = WIP
> |CPU_multicore_status = WIP
> |CPU_virt_status = ??
>
> |RAM_EDO_status = N/A
> |RAM_SDRAM_status = N/A
> |RAM_SODIMM_status = N/A
> |RAM_DDR_status = N/A
> |RAM_DDR2_status = OK
> |RAM_DDR3_status = N/A
> |RAM_dualchannel_status = N/A
> |RAM_ecc_status = WIP
>
> |IDE_status = N/A
> |IDE_CF_status = N/A
> |IDE_25_status = N/A
> |CDROM_DVD_status = WIP
> |SATA_status = WIP
> |USB_status = WIP
> |Onboard_VGA_status = OK
> |Onboard_ethernet_status = WIP
> |Onboard_audio_status = WIP
> |Onboard_modem_status = N/A
> |Onboard_firewire_status = N/A
> |Smartcard_status = N/A
> |Onboard_CF_status = N/A
> |Onboard_PCMCIA_status = N/A
>
> |ISA_cards_status = N/A
> |AMR_cards_status = N/A
> |AGP_cards_status = N/A
> |PCI_cards_status = OK
> |PCIE_x1_status = OK
> |PCIE_x2_status = N/A
> |PCIE_x4_status = N/A
> |PCIE_x8_status = N/A
> |PCIE_x16_status = N/A
> |PCIE_x32_status = N/A
> |HTX_status = N/A
>
> |Floppy_status = N/A
> |COM1_status = OK
> |COM2_status = N/A
> |PP_status = N/A
> |PS2_keyboard_status = N/A
> |PS2_mouse_status = N/A
> |Game_port_status = N/A
> |IR_status = N/A
> |Speaker_status = N/A
> |DiskOnChip_status = N/A
>
> |Sensors_status = 
> |Watchdog_status = 
> |CAN_bus_status = N/A
> |CPUfreq_status = 
> |Powersave_status = 
> |ACPI_status = 
> |Reboot_status = 
> |Poweroff_status = 
> |LEDs_status = 
> |HPET_status = 
> |RNG_status = 
> |WakeOnModem_status = 
> |WakeOnLAN_status = 
> |WakeOnKeyboard_status = 
> |WakeOnMouse_status = 
> |Flashrom_status =
> Thanks, Uwe.
>
> http://www.hermann-uwe.de  | http://www.holsham-traders.de
> http://www.crazy-hacks.org | http://www.unmaintained-free-software.org