On 07/27/2007 10:52 AM, Peter Stuge wrote:
If you want to help further, then please set also E2DEBUG=1 in Config and rebuild FILO. That should give a lot more ext2 debug output which I would appreciate if you could send.
Thanks!
//Peter
I have not made any changes to filo other than using the small spin-up delay patch as well as the large patch that is supposed to speed-up reading initrd. I ran again with E2DEBUG=1 but minicom's screen buffer overflowed so I'm attaching only the last part of the debugging messages. I hope that helps.
John =====
a4 81 00 00 28 86 1c 00 13 fa a7 46 67 f6 93 46 67 f6 93 46 00 00 00 00 00 00 01 00 50 0e 00 00 00 00 00 00 00 00 00 00 3d 28 33 00 3e 28 33 00 3f 28 33 00 40 28 33 00 41 28 33 00 42 28 33 00 43 28 33 00 44 28 33 00 46 28 33 00 47 28 33 00 48 28 33 00 49 28 33 00 4a 28 33 00 00 00 00 00 00 00 00 00 77 09 34 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 logical block 455 a4 81 00 00 28 86 1c 00 13 fa a7 46 67 f6 93 46 67 f6 93 46 00 00 00 00 00 00 01 00 50 0e 00 00 00 00 00 00 00 00 00 00 3d 28 33 00 3e 28 33 00 3f 28 33 00 40 28 33 00 41 28 33 00 42 28 33 00 43 28 33 00 44 28 33 00 46 28 33 00 47 28 33 00 48 28 33 00 49 28 33 00 4a 28 33 00 00 00 00 00 00 00 00 00 77 09 34 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 logical block 456 a4 81 00 00 28 86 1c 00 13 fa a7 46 67 f6 93 46 67 f6 93 46 00 00 00 00 00 00 01 00 50 0e 00 00 00 00 00 00 00 00 00 00 3d 28 33 00 3e 28 33 00 3f 28 33 00 40 28 33 00 41 28 33 00 42 28 33 00 43 28 33 00 44 28 33 00 46 28 33 00 47 28 33 00 48 28 33 00 49 28 33 00 4a 28 33 00 00 00 00 00 00 00 00 00 77 09 34 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 logical block 456 ext2fs_read_many: 445 blocks 3352651 - 3353095 len=1820200 ret=40960 devreadmany: sectors 26821208 - 26824767 (3560) to 4024b9b0 ide_readmany: sectors 70742918 - 70743173 (256) to 0x4024b9b0 ide_readmany: sectors 70743174 - 70743429 (256) to 0x4026b9b0 ide_readmany: sectors 70743430 - 70743685 (256) to 0x4028b9b0 ide_readmany: sectors 70743686 - 70743941 (256) to 0x402ab9b0 ide_readmany: sectors 70743942 - 70744197 (256) to 0x402cb9b0 ide_readmany: sectors 70744198 - 70744453 (256) to 0x402eb9b0 ide_readmany: sectors 70744454 - 70744709 (256) to 0x4030b9b0 ide_readmany: sectors 70744710 - 70744965 (256) to 0x4032b9b0 ide_readmany: sectors 70744966 - 70745221 (256) to 0x4034b9b0 ide_readmany: sectors 70745222 - 70745477 (256) to 0x4036b9b0 ide_readmany: sectors 70745478 - 70745733 (256) to 0x4038b9b0 ide_readmany: sectors 70745734 - 70745989 (256) to 0x403ab9b0 ide_readmany: sectors 70745990 - 70746245 (256) to 0x403cb9b0 ide_readmany: sectors 70746246 - 70746477 (232) to 0x403eb9b0 ext2fs_read: discarding 2520 surplus bytes ext2fs_read: done reading many len=0 ret=1861160 ok malloc_diag: alloc: 568 bytes (6 blocks), free: 15808 bytes (1 blocks) file_open: dev=hde3, path=/boot/initrd-2.6.22.img devopen: already open inode 2 dirname=/boot/initrd-2.6.22.img ipg=32736, dpb=128 group_id=0 group_desc=0 desc=0 fsblock 1 buffer 1199488 inode table fsblock=1027 fsblock 1027 buffer 1203584 ide_readmany: sector 43929926 to 0x0011d360 ide_readmany: sector 43929927 to 0x0011d560 ide_readmany: sector 43929928 to 0x0011d760 ide_readmany: sector 43929929 to 0x0011d960 ide_readmany: sector 43929930 to 0x0011db60 ide_readmany: sector 43929931 to 0x0011dd60 ide_readmany: sector 43929932 to 0x0011df60 ide_readmany: sector 43929933 to 0x0011e160 ipb=32, sizeof(inode)=128 inode=125d80, raw_inode=125e00 offset into inode table block=128 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 first word=0 first word=0 File not found malloc_diag: alloc: 552 bytes (5 blocks), free: 15824 bytes (1 blocks) Can't open initrd: hde3:/boot/initrd-2.6.22.img malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks) malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks)