[Please always reply to the mailing list, not individual developers]
----- Forwarded message from Anton anton.borisov@gmail.com -----
From: Anton anton.borisov@gmail.com To: Uwe Hermann uwe@hermann-uwe.de Subject: Re: [LinuxBIOS] ICH7DH: flash_enable failed Date: Fri, 30 Mar 2007 19:08:41 +0400
On Fri, 30 Mar 2007 15:52:25 +0200 Uwe Hermann uwe@hermann-uwe.de wrote:
On Tue, Mar 27, 2007 at 07:21:06PM +0400, Anton wrote:
flashrom's output below. what I've missed so far?
Which chip is this? And on which mainboard do you try to use flashrom?
00:00.0 Host bridge: Intel Corporation 82975X Memory Controller Hub 00:01.0 PCI bridge: Intel Corporation 82975X PCI Express Root Port 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01) 00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GH (ICH7DH) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 04:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller 05:00.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01) 05:04.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) 05:05.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02)
00:00.0 Class 0600: 8086:277c 00:01.0 Class 0604: 8086:277d 00:1b.0 Class 0403: 8086:27d8 (rev 01) 00:1c.0 Class 0604: 8086:27d0 (rev 01) 00:1c.4 Class 0604: 8086:27e0 (rev 01) 00:1c.5 Class 0604: 8086:27e2 (rev 01) 00:1d.0 Class 0c03: 8086:27c8 (rev 01) 00:1d.1 Class 0c03: 8086:27c9 (rev 01) 00:1d.2 Class 0c03: 8086:27ca (rev 01) 00:1d.3 Class 0c03: 8086:27cb (rev 01) 00:1d.7 Class 0c03: 8086:27cc (rev 01) 00:1e.0 Class 0604: 8086:244e (rev e1) 00:1f.0 Class 0601: 8086:27b0 (rev 01) 00:1f.1 Class 0101: 8086:27df (rev 01) 00:1f.2 Class 0101: 8086:27c0 (rev 01) 00:1f.3 Class 0c05: 8086:27da (rev 01) 04:00.0 Class 0200: 8086:109a 05:00.0 Class 0300: 5333:8a01 (rev 01) 05:04.0 Class 0c00: 104c:8024 05:05.0 Class 0104: 1095:3114 (rev 02)
Calibrating delay loop... Setting up microsecond timing loop 798M loops per second ok No LinuxBIOS table found. Enabling flash write on ICH7DH...tried to set 0xdc to 0x3 on ICH7DH failed (WARNING ONLY)
This _could_ be a problem, but not necessarily. It might also work, I think.
But it doesn't.
P.S. Flash chip is *infamous* SST25LF080A :-)
----- End forwarded message -----