Hi,
On Thu, Apr 19, 2007 at 10:33:13AM +0200, ST wrote:
Shows up blank in my mozilla, but read it in lynx.
Huh?! Thats really plain HTML and i could read it with Konqui and Iceweasel (aka Firefox). But to be sure i just validated the page:
Now it displays properly. Probably mozilla gone crazy.
What size is the SMD resistor? 0805, 0603 or something else?
This is important. It seems this would be a 0603 resistor. Please add that to the page.
And what does it do? Where is it connected?
The resistor is connected to INIT# of PLCC32 socket. It's an pullup which has been missing for the open pads.
Ok! Perhaps add that under a "Details of operation" section on the page too.
This pullup will eventually be pulled down by the switch connected to pad T12.
Yep, nice work.
Please confirm once you've tried flashrom. Booting only requires reads to work, but IIRC all relevant signals were connected across.
Yes but first i have to get some rom image. Or is the original firmware from Gigabyte in a format that can be used by flashbios?
I don't think flashrom cares at all about the contents.
Current kernels only need "acpi_use_timer_override" as cmdline option for successfull booting.
Do we know why?
Well actually i filed a bugreport: http://bugzilla.kernel.org/show_bug.cgi?id=8219
Nice! Still status NEEDINFO though. :\
//Peter