Dear LinuxBIOS readers!
This is the automated build check service of LinuxBIOS.
The developer "stepan" checked in revision 2926 to the LinuxBIOS source repository and caused the following changes:
Change Log: This patch fixes the superio of the khepri 2100e as detected:
superiotool r2922 Found Winbond W83627HF/F/HG/G (id=0x52, rev=0x0d) at 0x2e
Don't use the non-working trident driver for the blade3d (onboard vga in the rom emulator has not been tested either)
It also adds some preliminary CAR support to the board, so it has a chance to build again.
This board was broken since a couple of months, and the changes are minimal, so I consider this a trivial change -- It doesn't change anything that was used, obviously
Signed-off-by: Stefan Reinauer stepan@coresystems.de Acked-by: Stefan Reinauer stepan@coresystems.de
Build Log: Compilation of arima:hdama is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2926&device=hdama&... Compilation of ibm:e325 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2926&device=e325&v... Compilation of ibm:e326 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2926&device=e326&v... Compilation of iei:juki-511p is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2926&device=juki-511p&... Compilation of iwill:dk8s2 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2926&device=dk8s2&... Compilation of iwill:dk8x is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2926&device=dk8x&v... Compilation of newisys:khepri has been fixed
If something broke during this checkin please be a pain in stepan's neck until the issue is fixed.
If this issue is not fixed within 24h the revision should be backed out.
Best regards, LinuxBIOS automatic build system