Dieter Bloms wrote:
Hi,
yeah, I got the first readable output from my board. I have configured 9600 Baud in Config.lb and with 19200 in minicom I get these lines:
LinuxBIOS-2.0.0.0Fallback Sa 16. Jun 07:42:00 CEST 2007 starting... Hello world Hello world SMBus controller enabled PCI: 00:00.00 00: 86 80 80 35 06 00 90 20 02 00 00 06 00 00 80 00 10: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 40: 09 00 05 81 00 00 00 00 00 00 00 00 02 28 00 0e 50: 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 02 38 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 02 09 00 00 10 60 00 00 00 00 00 00 00 00 00 00 80: 02 00 00 a4 00 00 00 80 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 02 00 20 00 17 02 00 1f 00 00 00 00 00 00 00 00 b0: 00 00 f0 e9 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 Copying LinuxBIOS to RAM.
and then beep, beep, ... ok
Great to hear! Now the question is, why is the baud rate being doubled? And is it doubled for all baud rates? Or, you can ignore it for now and get to work on ram init ;) Good luck!
-Corey