ron minnich wrote:
This gets us to etherboot again, but this time devices are set up correctly on bus 1 --- i.e., the scan of the 8111 bridge works. It even tries to find the vga rom to run it, which we did not get before.
Signed-off-by: Ronald G. Minnich rminnich@gmail.com
If you explain the below, it's:
Acked-by: Peter Stuge peter@stuge.se
+++ southbridge/amd/amd8111/usb.c (working copy)
- .phase4_enable_disable = amd8111_enable,
Ok, enable USB.
+++ mainboard/amd/serengeti/dts (working copy) pci0@18,0 { /config/("northbridge/amd/k8/pci"); pci@0,0 {
/config/("southbridge/amd/amd8111/amd8111.dts");
/config/("southbridge/amd/amd8111/pci.dts");pci@5,0{/config/("southbridge/amd/amd8111/nic.dts");}; }; pci@4,0 { /config/("southbridge/amd/amd8111/ide.dts"); };
pci@5,0 {/config/("southbridge/amd/amd8111/nic.dts");};
Why treat nic and ide differently here? And what about that USB? Is it automatically added - and ide+nic needs to be explicitly listed?
+++ arch/x86/Makefile (working copy)
pci_ops_conf1.c resourcemap.c
pci_ops_conf1.c
Just cleanup? Isn't resourcemap needed because of the change or was it never needed?
//Peter